forked from 2511674586/withLinux
-
Notifications
You must be signed in to change notification settings - Fork 0
/
share-ipv4-with-ipv6-tunnel.txt
71 lines (63 loc) · 1.73 KB
/
share-ipv4-with-ipv6-tunnel.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
share ipv4 network with ipv6 tunnel
===
# Case
```
<ipv6-tunnel> <general ipv4 network>
[My device (M)] =============== [Server (S)] ------------------------ [ ipv4, 0/0 ]
eth0: :eth0 :usb0
```
where
M : (as client)
ipv4 not avaliable
ipv6 avaliable
ipv6 : [e::e/64] dev eth0
S : (as server)
both ipv4 and ipv6 avaliable
ipv6 : [e::1/64] dev eth0
ipv4 : [192.168.x.x] dev usb0
purpose :
share Server's ipv4 access with My device, via an ipv6 tunnel between M and S.
# Prepare @ M
* setting up tunnel at client
$ ip -6 tunnel add name gre1v6 mode ip6gre remote e::1 local e::e dev eth0
* add an IP address for dev gre1v6
$ ip addr add 10.0.0.2/8 brd + dev gre1v6
* turn on dev gre1v6
$ ip link set dev gre1v6 up
* setup route
$ ip route add to 0/0 via 10.0.0.1 dev gre1v6
(no need to touch ipv6 route in this case)
hint) to check them :
$ ip [-6] addr
$ ip [-6] route
$ ip [-6] tunnel
# Prepare @ S
* setting up tunnel at server
$ ip -6 tunnel add name gre1v6 mode ip6gre remove e::e local e::1 dev eth0
* add IP addr for dev gre1v6
$ ip addr add 10.0.0.1/8 brd + dev gre1v6
* turn on gre1v6
$ ip link set dev gre1v6 up
* route (default)
* enable kernel :: net.ipv4.ip_forward
$ sysctl net.ipv4.ip_forward=1
* setup ipv4 NAT
$ iptables -t nat -I POSTROUTING -o usb0 -j MASQUERADE
# Communication Test
1) tunnel test
@M :
* ipv6
ping6 e::1[%eth0]
* ipv4 in v6tunnel
ping 10.0.0.1
@S :
* ipv6
ping6 e::e[%eth0]
* ipv4 in v6tunnel
ping 10.0.0.2
if all passed, the tunnel is ready to work.
2) final test
@M :
ping <some-IP-that-is-outside> [-I gre1v6]
@S :
iptables -t nat -nvL # to see if there is any packets transfered.