Guest OS Installation Guide

1. Run Trinity through our provided executable. At the grub interface, select the last option---Installation - Install Android-x86 to harddisk

   

2. Select Create/Modify partitions to configure the harddisk.

   

3. Use GPT and press any key to continue.

   

4. Here you'll create a functional disk, use the left/right keys to navigate and select New (i.e., press Enter when you navigate to the option).

   

5. You'll be asked to type in specific configurations (e.g., sector size) of the disk, you can simply press Enter to all the configurations so as to set them to the default values.

6. After the configurations are done, you need to Write to the disk.

   

7. Type yes and press Enter to confirm write.

8. Select Quit to finish disk setup.

   

9. You can see here a partition has been set up. Directly press Enter to continue.

   

10. Select the ext4 filesystem. Use up/down keys to navigate the options.

    

11. Next, you'll be asked to confirm formatting and configure the boot options. For all the configurations, SELECT YES AND PRESS ENTER.

    

12. Installation begins.

    

13. All done! Enjoy Trinity now. We recommend rebooting first instead of directly running as the resolution may be low if you choose to directly run (if that happens, an additional reboot can solve that).