nginx missing on Darwin #296
Assignees
Comments
|
Looks like the PLIST expects .so, probably needs handling .dylib for OSX: I can look at fixing this for 2015Q3. |
|
Thanks for looking into it. FWIW, I'm using 2015Q3. I just thought I'd mention it was missing from Q2 as well. |
|
This is now available for 64-bit 2015Q3, 32-bit should follow in the next few hours. |
jperkin
pushed a commit
that referenced
this issue
Dec 30, 2015
Ok MAINTAINER bsiegert. While doing that, update to current release, 0.29.0. Changes since 0.24.0: Version 0.29.0 -------------- Compatibility notes: - when upgrading to 0.29.0 you need to upgrade client as well as server installations due to the locking and commandline interface changes otherwise you'll get an error msg about a RPC protocol mismatch or a wrong commandline option. if you run a server that needs to support both old and new clients, it is suggested that you have a "borg-0.28.2" and a "borg-0.29.0" command. clients then can choose via e.g. "borg --remote-path=borg-0.29.0 ...". - the default waiting time for a lock changed from infinity to 1 second for a better interactive user experience. if the repo you want to access is currently locked, borg will now terminate after 1s with an error message. if you have scripts that shall wait for the lock for a longer time, use --lock-wait N (with N being the maximum wait time in seconds). Bug fixes: - hash table tuning (better chosen hashtable load factor 0.75 and prime initial size of 1031 gave ~1000x speedup in some scenarios) - avoid creation of an orphan lock for one case, #285 - --keep-tag-files: fix file mode and multiple tag files in one directory, #432 - fixes for "borg upgrade" (attic repo converter), #466 - remove --progress isatty magic (and also --no-progress option) again, #476 - borg init: display proper repo URL - fix format of umask in help pages, #463 New features: - implement --lock-wait, support timeout for UpgradableLock, #210 - implement borg break-lock command, #157 - include system info below traceback, #324 - sane remote logging, remote stderr, #461: - remote log output: intercept it and log it via local logging system, with "Remote: " prefixed to message. log remote tracebacks. - remote stderr: output it to local stderr with "Remote: " prefixed. - add --debug and --info (same as --verbose) to set the log level of the builtin logging configuration (which otherwise defaults to warning), #426 note: there are few messages emitted at DEBUG level currently. - optionally configure logging via env var BORG_LOGGING_CONF - add --filter option for status characters: e.g. to show only the added or modified files (and also errors), use "borg create -v --filter=AME ...". - more progress indicators, #394 - use ISO-8601 date and time format, #375 - "borg check --prefix" to restrict archive checking to that name prefix, #206 Other changes: - hashindex_add C implementation (speed up cache re-sync for new archives) - increase FUSE read_size to 1024 (speed up metadata operations) - check/delete/prune --save-space: free unused segments quickly, #239 - increase rpc protocol version to 2 (see also Compatibility notes), #458 - silence borg by default (via default log level WARNING) - get rid of C compiler warnings, #391 - upgrade OS X FUSE to 3.0.9 on the OS X binary build system - use python 3.5.1 to build binaries - docs: - new mailing list borgbackup@python.org, #468 - readthedocs: color and logo improvements - load coverage icons over SSL (avoids mixed content) - more precise binary installation steps - update release procedure docs about OS X FUSE - FAQ entry about unexpected 'A' status for unchanged file(s), #403 - add docs about 'E' file status - add "borg upgrade" docs, #464 - add developer docs about output and logging - clarify encryption, add note about client-side encryption - add resources section, with videos, talks, presentations, #149 - Borg moved to Arch Linux [community] - fix wrong installation instructions for archlinux Version 0.28.2 -------------- New features: - borg create --exclude-if-present TAGFILE - exclude directories that have the given file from the backup. You can additionally give --keep-tag-files to preserve just the directory roots and the tag-files (but not backup other directory contents), #395, attic #128, attic #142 Other changes: - do not create docs sources at build time (just have them in the repo), completely remove have_cython() hack, do not use the "mock" library at build time, #384 - avoid hidden import, make it easier for PyInstaller, easier fix for #218 - docs: - add description of item flags / status output, fixes #402 - explain how to regenerate usage and API files (build_api or build_usage) and when to commit usage files directly into git, #384 - minor install docs improvements Version 0.28.1 -------------- Bug fixes: - do not try to build api / usage docs for production install, fixes unexpected "mock" build dependency, #384 Other changes: - avoid using msgpack.packb at import time - fix formatting issue in changes.rst - fix build on readthedocs Version 0.28.0 -------------- Compatibility notes: - changed return codes (exit codes), see docs. in short: old: 0 = ok, 1 = error. now: 0 = ok, 1 = warning, 2 = error New features: - refactor return codes (exit codes), fixes #61 - add --show-rc option enable "terminating with X status, rc N" output, fixes 58, #351 - borg create backups atime and ctime additionally to mtime, fixes #317 - extract: support atime additionally to mtime - FUSE: support ctime and atime additionally to mtime - support borg --version - emit a warning if we have a slow msgpack installed - borg list --prefix=thishostname- REPO, fixes #205 - Debug commands (do not use except if you know what you do: debug-get-obj, debug-put-obj, debug-delete-obj, debug-dump-archive-items. Bug fixes: - setup.py: fix bug related to BORG_LZ4_PREFIX processing - fix "check" for repos that have incomplete chunks, fixes #364 - borg mount: fix unlocking of repository at umount time, fixes #331 - fix reading files without touching their atime, #334 - non-ascii ACL fixes for Linux, FreeBSD and OS X, #277 - fix acl_use_local_uid_gid() and add a test for it, attic #359 - borg upgrade: do not upgrade repositories in place by default, #299 - fix cascading failure with the index conversion code, #269 - borg check: implement 'cmdline' archive metadata value decoding, #311 - fix RobustUnpacker, it missed some metadata keys (new atime and ctime keys were missing, but also bsdflags). add check for unknown metadata keys. - create from stdin: also save atime, ctime (cosmetic) - use default_notty=False for confirmations, fixes #345 - vagrant: fix msgpack installation on centos, fixes #342 - deal with unicode errors for symlinks in same way as for regular files and have a helpful warning message about how to fix wrong locale setup, fixes #382 - add ACL keys the RobustUnpacker must know about Other changes: - improve file size displays, more flexible size formatters - explicitly commit to the units standard, #289 - archiver: add E status (means that an error occured when processing this (single) item - do binary releases via "github releases", closes #214 - create: use -x and --one-file-system (was: --do-not-cross-mountpoints), #296 - a lot of changes related to using "logging" module and screen output, #233 - show progress display if on a tty, output more progress information, #303 - factor out status output so it is consistent, fix surrogates removal, maybe fixes #309 - move away from RawConfigParser to ConfigParser - archive checker: better error logging, give chunk_id and sequence numbers (can be used together with borg debug-dump-archive-items). - do not mention the deprecated passphrase mode - emit a deprecation warning for --compression N (giving a just a number) - misc .coverragerc fixes (and coverage measurement improvements), fixes #319 - refactor confirmation code, reduce code duplication, add tests - prettier error messages, fixes #307, #57 - tests: - add a test to find disk-full issues, #327 - travis: also run tests on Python 3.5 - travis: use tox -r so it rebuilds the tox environments - test the generated pyinstaller-based binary by archiver unit tests, #215 - vagrant: tests: announce whether fakeroot is used or not - vagrant: add vagrant user to fuse group for debianoid systems also - vagrant: llfuse install on darwin needs pkgconfig installed - vagrant: use pyinstaller from develop branch, fixes #336 - benchmarks: test create, extract, list, delete, info, check, help, fixes #146 - benchmarks: test with both the binary and the python code - archiver tests: test with both the binary and the python code, fixes #215 - make basic test more robust - docs: - moved docs to borgbackup.readthedocs.org, #155 - a lot of fixes and improvements, use mobile-friendly RTD standard theme - use zlib,6 compression in some examples, fixes #275 - add missing rename usage to docs, closes #279 - include the help offered by borg help <topic> in the usage docs, fixes #293 - include a list of major changes compared to attic into README, fixes #224 - add OS X install instructions, #197 - more details about the release process, #260 - fix linux glibc requirement (binaries built on debian7 now) - build: move usage and API generation to setup.py - update docs about return codes, #61 - remove api docs (too much breakage on rtd) - borgbackup install + basics presentation (asciinema) - describe the current style guide in documentation - add section about debug commands - warn about not running out of space - add example for rename - improve chunker params docs, fixes #362 - minor development docs update Version 0.27.0 -------------- New features: - "borg upgrade" command - attic -> borg one time converter / migration, #21 - temporary hack to avoid using lots of disk space for chunks.archive.d, #235: To use it: rm -rf chunks.archive.d ; touch chunks.archive.d - respect XDG_CACHE_HOME, attic #181 - add support for arbitrary SSH commands, attic #99 - borg delete --cache-only REPO (only delete cache, not REPO), attic #123 Bug fixes: - use Debian 7 (wheezy) to build pyinstaller borgbackup binaries, fixes slow down observed when running the Centos6-built binary on Ubuntu, #222 - do not crash on empty lock.roster, fixes #232 - fix multiple issues with the cache config version check, #234 - fix segment entry header size check, attic #352 plus other error handling improvements / code deduplication there. - always give segment and offset in repo IntegrityErrors Other changes: - stop producing binary wheels, remove docs about it, #147 - docs: - add warning about prune - generate usage include files only as needed - development docs: add Vagrant section - update / improve / reformat FAQ - hint to single-file pyinstaller binaries from README Version 0.26.1 -------------- This is a minor update, just docs and new pyinstaller binaries. - docs update about python and binary requirements - better docs for --read-special, fix #220 - re-built the binaries, fix #218 and #213 (glibc version issue) - update web site about single-file pyinstaller binaries Note: if you did a python-based installation, there is no need to upgrade. Version 0.26.0 -------------- New features: - Faster cache sync (do all in one pass, remove tar/compression stuff), #163 - BORG_REPO env var to specify the default repo, #168 - read special files as if they were regular files, #79 - implement borg create --dry-run, attic issue #267 - Normalize paths before pattern matching on OS X, #143 - support OpenBSD and NetBSD (except xattrs/ACLs) - support / run tests on Python 3.5 Bug fixes: - borg mount repo: use absolute path, attic #200, attic #137 - chunker: use off_t to get 64bit on 32bit platform, #178 - initialize chunker fd to -1, so it's not equal to STDIN_FILENO (0) - fix reaction to "no" answer at delete repo prompt, #182 - setup.py: detect lz4.h header file location - to support python < 3.2.4, add less buggy argparse lib from 3.2.6 (#194) - fix for obtaining ``char *`` from temporary Python value (old code causes a compile error on Mint 17.2) - llfuse 0.41 install troubles on some platforms, require < 0.41 (UnicodeDecodeError exception due to non-ascii llfuse setup.py) - cython code: add some int types to get rid of unspecific python add / subtract operations (avoid ``undefined symbol FPE_``... error on some platforms) - fix verbose mode display of stdin backup - extract: warn if a include pattern never matched, fixes #209, implement counters for Include/ExcludePatterns - archive names with slashes are invalid, attic issue #180 - chunker: add a check whether the POSIX_FADV_DONTNEED constant is defined - fixes building on OpenBSD. Other changes: - detect inconsistency / corruption / hash collision, #170 - replace versioneer with setuptools_scm, #106 - docs: - pkg-config is needed for llfuse installation - be more clear about pruning, attic issue #132 - unit tests: - xattr: ignore security.selinux attribute showing up - ext3 seems to need a bit more space for a sparse file - do not test lzma level 9 compression (avoid MemoryError) - work around strange mtime granularity issue on netbsd, fixes #204 - ignore st_rdev if file is not a block/char device, fixes #203 - stay away from the setgid and sticky mode bits - use Vagrant to do easy cross-platform testing (#196), currently: - Debian 7 "wheezy" 32bit, Debian 8 "jessie" 64bit - Ubuntu 12.04 32bit, Ubuntu 14.04 64bit - Centos 7 64bit - FreeBSD 10.2 64bit - OpenBSD 5.7 64bit - NetBSD 6.1.5 64bit - Darwin (OS X Yosemite) Version 0.25.0 -------------- Compatibility notes: - lz4 compression library (liblz4) is a new requirement (#156) - the new compression code is very compatible: as long as you stay with zlib compression, older borg releases will still be able to read data from a repo/archive made with the new code (note: this is not the case for the default "none" compression, use "zlib,0" if you want a "no compression" mode that can be read by older borg). Also the new code is able to read repos and archives made with older borg versions (for all zlib levels 0..9). Deprecations: - --compression N (with N being a number, as in 0.24) is deprecated. We keep the --compression 0..9 for now to not break scripts, but it is deprecated and will be removed later, so better fix your scripts now: --compression 0 (as in 0.24) is the same as --compression zlib,0 (now). BUT: if you do not want compression, you rather want --compression none (which is the default). --compression 1 (in 0.24) is the same as --compression zlib,1 (now) --compression 9 (in 0.24) is the same as --compression zlib,9 (now) New features: - create --compression none (default, means: do not compress, just pass through data "as is". this is more efficient than zlib level 0 as used in borg 0.24) - create --compression lz4 (super-fast, but not very high compression) - create --compression zlib,N (slower, higher compression, default for N is 6) - create --compression lzma,N (slowest, highest compression, default N is 6) - honor the nodump flag (UF_NODUMP) and do not backup such items - list --short just outputs a simple list of the files/directories in an archive Bug fixes: - fixed --chunker-params parameter order confusion / malfunction, fixes #154 - close fds of segments we delete (during compaction) - close files which fell out the lrucache - fadvise DONTNEED now is only called for the byte range actually read, not for the whole file, fixes #158. - fix issue with negative "all archives" size, fixes #165 - restore_xattrs: ignore if setxattr fails with EACCES, fixes #162 Other changes: - remove fakeroot requirement for tests, tests run faster without fakeroot (test setup does not fail any more without fakeroot, so you can run with or without fakeroot), fixes #151 and #91. - more tests for archiver - recover_segment(): don't assume we have an fd for segment - lrucache refactoring / cleanup, add dispose function, py.test tests - generalize hashindex code for any key length (less hardcoding) - lock roster: catch file not found in remove() method and ignore it - travis CI: use requirements file - improved docs: - replace hack for llfuse with proper solution (install libfuse-dev) - update docs about compression - update development docs about fakeroot - internals: add some words about lock files / locking system - support: mention BountySource and for what it can be used - theme: use a lighter green - add pypi, wheel, dist package based install docs - split install docs into system-specific preparations and generic instructions
jperkin
pushed a commit
that referenced
this issue
Mar 18, 2016
kramdown 1.10.0 released
This release brings the usual bug fixes but also support for the strikethrough
syntax in the GFM parser as well as some enhancements regarding the
specification of language names for syntax highlighting purposes.
Changes
* 4 minor changes:
o Support for the math-engine MathJax-Node was updated to use the new
mathjax-node package (fixes #313, pull request by Tom Thorogood)
o URL query parameters can now be appended to language names specified in
fenced code blocks if the syntax highlighting engine accepts them (fixes
#234)
o Added strikethrough syntax to the GFM parser (fixes #184 and #307; initial
pull request by Diego Galeota, updated by Parker Moore)
o Allow almost all characters in class names that are defined via a special
syntax (fixes #318, requested by cabo)
* 4 bug fixes:
o Fixed a problem where Kramdown::Document.new would only accept the symbol
:input but not the string ¡Æinput¡Ç as valid key (fixes #312, pull request
by Sun Yaozhu)
o Fixed inconsistent behavior: Empty link text is now also allowed for
normal links, not just images (fixes #305, reported by cabo)
o The HTML5 <mark> element is now recognized as span level element (fixes
#298, reported by Niclas Darville)
o Fixed problem where e-mail autolinks containing an underscore character
were not correctly recognized (fixes #293, reported by erikse)
* 3 other fixes:
o Fixed missing package update statement for Travis (by Parker Moore)
o Add some more documentation regarding MathJax (fixes #296, pull request by
Christopher Jefferson)
o Fixed bad link in API documentation (fixes #315, reported by Tom MacWright)
jperkin
pushed a commit
that referenced
this issue
Jul 17, 2016
- Fix incorrectly reporting files containing disabled formatting as being formatted. - Fix incorrect handling of quoted arguments in the options file (#321). - Fix error in identifying an enum return type as an enumeration (#322, 323). - Fix error in identifying an enum argument as an enumeration (#327). - Fix recognition of Qt keywords when used as variables in C++ (#329). - Fix recognition of a pointer in a C++ cast (#316). - Fix removing trailing whitespace after a changed pointer or reference cast. - Add new bracket style option "style=vtk" (#155). - Add new option "indent-preproc-block" to indent blocks of preprocessor directives (#21, #114, #229, #242, #294). - Add new option, "dry-run", to run AStyle without updating the files (#184, #285). - Add new options, "html" (-!") and "html=###", to display the HTML help documentation in the default browser. - Add tags "*INDENT-OFF*" and "*INDENT_ON*" to disable formatting of source code blocks (#2, #47, #55, #78, #110, #176). - Add tag *NOPAD* to disable selected formatting on a single line. - Add '__attribute__ ((visibility ("default")))' to Linux exported functions. - Remove option "style=ansi" and make it depreciated (#146). - Remove fix for broken 'case' statements from release 2.02.1, Nov 21, 2011. - Improve Korean translation (#256). - Change shared libraries to include the version number as part of the file name (#264) - Change "help" display to stdout to allow piping and redirection (#63). - Change "version" display to stdout. - Change headers to include foreach, forever, Q_FOREACH, and Q_FOREVER (#98, #154). - Change compiler definition ASTYLE_NO_VCX (no Visual Studio exports) to ASTYLE_NO_EXPORTS. - Change shared library error handler argument from "char*" to "const char*". - Fix not recognizing noexcept, interrupt, and autoreleasepool as pre-command headers (#225, #259). - Fix formatting of C++11 uniform initializer brackets (#253, #257, #260, #284). - Fix to not automatically space pad C++11 uniform initializer brackets (#275). - Fix formatting of enums with leading commas (#159, #179, #270). - Fix formatting of logical && operator in class initializers (#290). - Fix flagging a 'const' variable as a 'const' method (#275). - Fix piping and redirection adding an extra character to the output (#245, #252, #305). - Fix "indent-modifiers" to attach class access modifiers to Horstmann style brackets. - Fix ASFormatter to correctly recognize the end of a C++ raw string literal (#261). - Fix to recognize C++11 "enum class" as an enum (#303). - Fix indent of C++11 "noexecpt" statements within a class (#260, #304). - Fix not resetting templateDepth when a template was not found (#295). - Fix formatting of multiplication in a block paren (#144). - Fix whitespace padding when formatting an rvalue references (#297). - Fix to recognize an rvalue reference without a name (#265). - Fix to not identify an operator overload method as a calculation (#296). - Fix concatenating multiplication with a pointer dereference (#291). - Fix recognition of a pointer dereference following a question mark (#213). - Fix extra space after a trailing reference type (#300). - Fix _asm blocks not being identified as a block opener and the variable not cleared on exit (#163). - Fix indentation of line comments before a "class" opening bracket. - Fix indentation of line comments before a "namespace" opening bracket. - Fix isBracketType() method to correctly process a NULL_TYPE. - Fix unpad-paren to recognize additional variables (#43, #132, #143). - Fix indentation of C# "let" statements. - Fix a few omissions with "fill-empty-lines". - Fix file read to read 64K blocks of data. - Refactor to un-obfuscate (clarify) the code, and improve design and decomposition:: - Extract class Utf8_16 from ASConsole. - Replace Linux dependency on iconv with a Utf8_16 class for ASLibrary. - Move global "using" statements to the astyle namespace in astyle.h and ASLocalizer.h. - Move shared library declarations from astyle.h to astyle_main.h. - Move indentable macros from ASEnhancer to ASResource and create static pairs. - Simplify ASBeautifier procedure to identify the colon (:) type. - Major refactoring in ASBeautifier to create separate variables for an enum, a class statement and a class initializer. - This was needed to fix the processing of C++11 uniform initializers in a class initializer. - Minor changes to ASFormatter and ASBeautifier based on results of the Clang analyzer. - Change several methods in astyle_main to "const".
jperkin
pushed a commit
that referenced
this issue
Aug 4, 2016
Upstream changes:
0.9995 2016-07-27T09:23:55Z
- Taught the `add` command not to ignore the `--change` option.
- The `add` command now emits a usage statement when no change name is
passed to it.
- The `add` command now helpfully suggests using the --change option when
attempting to add a change with the same name as a target. Thanks to
Ivan Nunes for the report!
- The `tag` command now helpfully suggests using the --tag option when
attempting to add a tag with the same name as a target.
- Added `--global` as an alias for `--user` to the `config` command. This
alias benefits the muscle memory of Git users.
- Added a note for Git users to the `sqitch-revert` documentation, to
head off potential confusion with `git revert`. Thanks to Eric
Br矇chemier for the "time travel" analogy and wording.
- Fixed an "uninitialized value" error when creating a registry database
on Windows. Thanks to Steven C. Buttgereit for the report (Issue #289).
- Fixed editor selection to prioritize the `core.editor` configuration
variable over the `$EDITOR` environment variable. The `$SQITCH_EDITOR`
environment variable still trumps all. Thanks to Jim Nasby for the pull
request (#296).
- Added detection of the `$VISUAL` environment variable to Editor
selection, prioritzed after the `core.editor` configuration variable
and before the `$EDITOR` environment variable. Thanks to Jim Nasby for
the pull request (#296).
- Updated the DateTime code to set the locale via `set_locale()` instead
of `set()`, as the latter may actually change the local time
unintentionally, and has been deprecated since DateTime v1.04. Thanks
to Dave Rolsky for the pull request (#304).
0.9994 2016-01-08T19:46:43Z
- Reduced minimum required MySQL engine from 5.1.0 to 5.0.0. Thanks to
@dgc-wh for testing it (Issue #251).
- Fixed floating-point rounding issue with SQLite registry versions on
Perls with 16-byte doubles. Thanks to H. Merijn Brand for the report
and testing.
- Fixed an error when adding an engine with the `engine` command. Thanks
to Victor Mours for the report and fix!
- Updated the Oracle engine to support Oracle Wallet connection strings,
where no username or host is in the connection URI. Thanks to Timothy
Procter for the patch!
- Improved the installer's selection of the prefix in which to install
`etc` files to better match the `--installdirs` option, which defaults
to the "site" directories. Thanks to @carragom for the pull request
(#265).
- Added missing dash to `-engine` in sample calls to `sqitch init` in the
tutorials. Thanks to Andrew Dunstan for the spot (Issue #268).
- Fixed broken Vertica documentation links.
- Attempting to revert a database with no associated registry no longer
reports the registry as version 0, but correctly reports that no
registry can be found. Thanks to Arnaldo Piccinelli for the spot (Issue
#271).
- Fixed the search for change IDs in engines to match the search for
changes. Specifically, change ID seaerch now properly handles the
offset characters `~` and `^`. This bug mainly affected the `verify`
command, but it's good to address the inconsistency, done mainly by
adding the `find_change_id` and `change_id_offset_from_id` methods to
complement the `find_change` and `change_offset_from_id` methods.
Thanks to Andrew Dunstan for the spot (Issue #272).
- Fixed the `flips` table example in the MySQL tutorial. It was
inappropriately copied from the PostgreSQL tutorial at some point.
Thanks to Jeff Carpenter for the spot (Issue #254)!
0.9993 2015-08-17T17:55:26Z
[Bug Fixes]
- Eliminated test failures due to warnings from DateTime::Locale when
`LC_TIME` is set to C.UTF-8. Thanks to Shantanu Bhadoria for the report
and Dave Rolsky for the workaround.
- Fixed an error checking the registry version when the local uses a
comma for decimal values. Thanks to Steffen M羹ller for the report
(Issue #234).
- Worked around an error setting the MySQL storage engine using versions
of DBI prior to 1.631. Thanks to melon-babak for the report!
- Fixed an error from the Oracle engine when deploying more than 1000
changes. Thanks to Timothy Procter and Minh Hoang for the report and
testing the fix.
- Fixed a bunch of typos in error messages, comments, and documentation.
Thanks to Dmitriy for the pull request!
- Fixed test failures due to new warnings from File::Path on Perl
5.23.1.
- On Firebird, Looking up a change and tag in the database (via the
`--onto` option to `rebase` or the `--to` option to `revert`, among
others) would sometimes return the incorrect change if the change has
been reworked two or more times. Was fixed for the other engines in
v0.9991.
- Fixed the `--all` option used to apply a command to all known targets
so that it loads only targets specified by the local configuration.
Otherwise, user and system configuration can get in the way when they
specify engines and targets not used by the current project.
[Improvements]
- Added support for the `--set` option when deploying to MySQL. Thanks to
Chris Bandy for figuring out how to do it!
- Added support for a "reworked directory". By default, reworked change
scripts live in the deploy, revert, and verify directories along with
all the other change scripts. But if that starts to get too messy, or
you simply don't want to see them, add a `reworked_dir` setting to the
core, engine, or target config and reworked scripts will be stored
there, instead. Also supported are `reworked_deploy_dir`,
`reworked_revert_dir`, and `reworked_verify_dir`.
- Added the `--dir` option to the `init`, `engine`, and `target`
commands.
- Copied the core configuration options (`--engine`, `--target`,
`--plan-file`, `--registry`, etc.) to the `init`, `engine`, and
`target` commands. This means that they can be specified after the
command, which is a bit more natural. It also means that the
`--registry` and `--client` options of the `target` are no longer
deprecated.
- The `init` command on longer writes out commented values for the
`deploy_dir`, `revert_dir`, or `verify_dir` settings. I think these
settings are not commonly used, and it would start to get crowded if we
also added their "reworked" variants, which will be used still less.
- Added the `alter` action to the `engine` and `target` commands to set
engine and target properties.
- Added support for setting reworked directories to the `engine` and
`target` commands.
- Reformatted the output of the `engine` and `target` command `show`
actions to include reworked directories, and to bit a bit less flat.
- Attempting to add or alter an engine with a target URI that connects to
a different engine now triggers an error. For example, you can't set
the target for engine `pg` to `db:sqlite:`.
- The `add` and `alter` actions of the `engine` and `target` commands
now create script directories if they don't already exist.
- The `add` action of the `engine` and `target` commands now creates a
plan file if one does not exist in the specified location for the
engine or target.
- Added the `deploy_dir`, `revert_dir`, and `verify_dir` methods to
App::Sqitch::Plan::Change. Each points to the proper directory for the
target depending on whether or not the change has been reworked.
- In the MySQL engine, the following URI query params will be converted
to options passed to the command-line client, if they're present:
* mysql_compression=1 => --compress
* mysql_ssl=1 => --ssl
* mysql_connect_timeout => --connect_timeout
* mysql_init_command => --init-command
* mysql_socket => --socket
* mysql_ssl_client_key => --ssl-key
* mysql_ssl_client_cert => --ssl-cert
* mysql_ssl_ca_file => --ssl-ca
* mysql_ssl_ca_path => --ssl-capath
* mysql_ssl_cipher => --ssl-cipher
[Documentation]
- Added the "Overworked" section to sqitch-configuration guide with an
example of how to move reworked change scripts into a `reworked_dir`.
[Deprecations]
- Deprecated the `set-*` actions in the `engine` and `target` commands in
favor of the new `alter` action.
- The core `--deployed-dir`, `--revert-dir`, and `--verify-dir` options
are deprecated in favor of the `--dir` option on the `init`, `engine`,
and `target` command.
0.9992 2015-05-20T23:51:41Z
- On PostgreSQL, Sqitch now sets the `client_encoding` parameter to
`UTF8` for its own connection to the database. This ensures that data
sent to and from the databse should always be properly encoded and
decoded. Users should still set the proper encodings for change scripts
as appropriate.
- Fixed test failures due to path differences on Windows.
- DateTime::TimeZone is now explicitly required in an attempt to head off
"Cannot determine local time zone" errors.
- Corrected some typos and thinkos in `sqitchtutorial-oracle`, thanks to
George Hartzell.
- Improved the script to upgrade an Oracle registry to v1.0 to support
versions prior to Oracle 12, thanks to Timothy Procter.
- Added missing closing parenthesis to the "Nothing to deploy" message.
Thanks to George Hartzell for the pull request (Issue #226).
- Replaced the unique constraint on the `script_hash` column in the
`changes` registry table with a unique constraint on `project` and
`script_hash`. This is to allow a deploy script to be used in more than
one project in a single database. This change increments the registry
version to v1.1. Thanks to Timothy Procter for the report.
- Updated the registry check constraints to have consistent names on the
engines that support them. This will make it easier to modify the
constraints in the future.
- Fixed precision issues with the registry version on MySQL and Firebird.
- Added comment to sqitch-passwords guide that MySQL::Config is required
to read passwords from the MySQL configuration files. Thanks to
Sterling Hanenkamp for the patch!
0.9991 2015-04-03T23:14:39Z
[Improvements]
- Reduced minimum required MySQL engine from 5.6.4 to 5.1.0. Versions
prior to 5.6.4 lose the following features:
* Versions earlier than 5.6.4 is fractional second precision on
registry `DATETIME` columns. Since the ordering of those timestamps
is so important to the functioning of Sqitch, it will sleep in 100 ms
increments between logging changes to the registry until the time has
ticked over to the next second. Naturally, reverts and deploys will
be a little slower on versions of MySQL before 5.6.4, but accurate.
* Versions earlier than 5.5.0 lose the `checkit()` functions, which
would otherwise be used to emulate CHECK constraints in the registry,
as well as in user-created verify scripts, as recommended in the
MySQL tutorial, `sqitchtutorial-mysql`.
- Added a script to update the `DATETIME` columns in a MySQL Sqitch
registry that was upgraded to MySQL 5.6.4 or higher. It will be
installed as `tools/upgrade-registry-to-mysql-5.6.4.sql` in the
directory returned by `sqitch --etc`.
- Added a script to add the `checkit()` function and registry triggers to
emulate CHECK constraints to a MySQL Sqitch registry that was upgraded
to MySQL 5.5.0 or higher. It will be installed as
`tools/upgrade-registry-to-mysql-5.5.0.sql` in the directory returned
by `sqitch --etc`.
- The `init` command now throws an error when the plan file already
exists and is invalid or defined for a different project. Thanks to
Gabriel Potk獺ny for the suggestion (Issue #214).
- All commands that take target arguments can now specify them as engine
names or plan file paths as well as target names and URIs.
- Added the `--all` option and the `$command.all` configuration variable
to the `add`, `rework`, `tag`, and `bundle` commands. This option tells
the commands to do their thing for all plans known from the
configuration, not just the default plan.
- Pass engine, target, or plan file names to the `add`, `rework`, `tag`,
and `bundle` commands` commands to specify specify one or more targets,
engines, and plans to act on.
- Added the `--change` option to the `add`, `rework`, and `tag` commands
to distinguish the change to be added, reworked, or tagged from
plan-specifying arguments, if necessary.
- Added the `--tag` option to the `tag` command to distinguish the tag to
be added from plan-specifying arguments, if necessary.
- Changed the short variant of the `--conflicts` option to the `add` and
`rework` commands from `-c` to `-x`. The `-c` option is now used as the
short variant for `--change` (and `--conflicts` has almost certainly
never been used, anyway).
- Added the `engine` and `project` variables to the execution of script
templates by the `add` command. The default templates now use it to
make their first lines one of:
* -- Deploy [% project %]:[% change %] to [% engine]
* -- Revert [% project %]:[% change %] from [% engine]
* -- Verify [% project %]:[% change %] on [% engine]
[Bug Fixes]
- DateTime::TimeZone::Local::Win32 is now required on Windows.
- The MySQL engine no longer passes `--skip-pager` on Windows, since
it is not supported there. Thanks to Gabriel Potk獺ny for the report
(Issue #213).
- Fixed "no such table: changes" error when upgrading the SQLite
registry.
- Fixed upgrade failure on PostgreSQL 8.4. Thanks to Phillip Smith for
the report!
- Fixed an error when the `status` command `show_changes` and `show_tags`
configuration variables were set. Thanks to Adrian Klaver for the
report (Issue #219).
- Fixed `log` and `plan` usage statements to properly spell `--abbrev`.
Thanks to Adrian Klaver for the report (Issue #220).
- Fixed the formatting of change notes so that a space precedes the `#`
character whether the note was added by the `--note` option or via an
editor.
- Fixed a bug when parsing plan files with DOS/Windows line endings.
Thanks to Timothy Procter for the report (Issue #212).
- Looking up a change and tag in the database (via the `--onto` option to
`rebase` or the `--to` option to `revert`, among others) would
sometimes return the incorrect change if the change has been reworked
two or more times. Thanks to BryLo for the report!
[Documentation]
- Updated docs to be consistent in referring to the location of the system
configuration and template location as `$(prefix)/etc/sqitch`. Also
added notes pointing to the `--etc-dir` to find out exactly what that
resolves to. Suggested by Joseph Anthony Pasquale Holsten (Issue #167).
[Deprecations]
- Reverted deprecation of the database connection options. Target URIs
are still generally preferred, but sometimes you want to use a target
but just change the user name or database name. Retaining the options
is the easiest way to do this. Plus, a fair number of people have
scripts that use these options, and it seems petty to break them. Sorry
for the double-take here! The list of un-deprecated options is:
* `--db-client`
* `--db-host`
* `--db-port`
* `--db-username`
* `--db-password`
* `--db-name`
0.999 2015-02-12T19:43:45Z
- Improved MySQL missing table error detection by relying on error codes
instead of matching a (possibly localized) error string.
- Made the registry upgrade more transparent when deploying. Sqitch is
now is a little more vigilent in checking for things being out-of-date
and updating them.
- Fixed an issue where the `status` command would return an error when
run against a an older version of the registry.
- Fixed a Postgres test failure when DBD::Pg is installed but psql is not
in the path.
- Now require Config::GitLike 1.15 to build on Windows in order to avoid
test failures when Cwd::abs_path dies on non-existant paths.
- Clarified the behavior of each `deploy` reversion mode with regard to
deploy script vs. verify script failures, and with the expectation that
deploy scripts are atomic.
- Target passwords can now be set via a single environment variable,
`$SQITCH_PASSWORD`. Its value will override URI-specified password.
- Added the sqitch-passwords and sqitch-environment guides.
0.998 2015-01-15T22:17:44Z
- Fixed a bug in `sqitch engine update-config` where it would add data to
config files that did not previously have them, or report that data was
present in nonexistent config files.
- Added the `releases` table to the databases. This table will keep track
of releases of the Sqitch registry schema.
- The Oracle `registry` variable is now always `DEFINE`d when Oracle
scripts run.
- Added the `upgrade` command, which upgrades the schema for the Sqitch
registry for a target database.
- Added the `script_hash` column to the `changes` registry table. This
column contains a SHA-1 hash of the deploy script for the change at the
time it was deployed. For existing registries, the upgrade script sets
its value to be the same as the change ID. This value is update the
next time a project is deployed to the database.
- The error message when `deploy` cannot find the currently-deployed
change ID in the plan now includes more contextual information,
including the change name, associated tags, and the plan file name.
Suggested by Curtis Poe (Issue #205).
- Comments on Firebird registry objects are now created with the
`COMMENT` command, rather than INSERTs into catalog tables.
- Added support for "merge" events, though none are logged, yet.
jperkin
pushed a commit
that referenced
this issue
Jan 23, 2017
This upgrade fixes compatibility with new lxml.
Upstream changelog
==================
2.3.1
_This is a micro release and I have very little time on my hands right now sorry_
Fix crash with no values when the print_values_position param is set (thanks @cristen)
2.3.0
New call API: chart = Line(fill=True); chart.add('title', [1, 3, 12]); chart.render() can now be replaced with Line(fill=True)(1, 3, 12, title='title').render()
Drop python 2.6 support
2.2.3
Fix bar static value positioning (#315)
Add stroke_opacity style (#321)
Remove useless js in sparklines. (#312)
2.2.2
Add classes option.
Handle ellipsis in list type configs to auto-extend parent. (Viva python3)
2.2.0
Support interruptions in line charts (thanks @piotrmaslanka #300)
Fix confidence interval reactiveness (thanks @chartique #296)
Add horizontal line charts (thanks @chartique #301)
There is now a formatter config option to format values as specified. The formatter callable may or may not take chart, serie and index as argument. The default value formatting is now chart dependent and is value_formatter for most graph but could be a combination of value_formatter and x_value_formatter for dual charts.
The human_readable option has been removed. Now you have to use the pygal.formatters.human_readable formatter (value_formatter=human_readable instead of human_readable=True)
New chart type: SolidGauge (thanks @chartique #295)
Fix range option for some Charts (#297 #298)
Fix timezones for DateTimeLine for python 2 (#306, #302)
Set default uri protocol to https (should fix a lot of "no tooltips" bugs).
2.1.1
Import scipy as a last resort in stats.py (should workaround bugs like #294 if scipy is installed but not used)
2.1.0
Bar print value positioning with print_values_position. Can be top, center or bottom (thanks @chartique #291) ci doc
Confidence intervals (thanks @chartique #292) data doc
2.0.12
Use custom xml_declaration avoiding conflict with processing instructions
2.0.11
lxml 3.5 compatibility (#282)
2.0.10
Fix transposable_node in case all attributes are not there. (thanks @yobuntu).
2.0.9
Add dynamic_print_values to show print_values on legend hover. (#279)
Fix unparse_color for python 3.5+ compatibility (thanks @felixonmars, @sjourdois)
Process major labels as labels. (#263)
Fix labels rotation > 180 (#257)
Fix secondary axis
Don't forget secondary series in table rendering (#260)
Add defs config option to allow adding gradients and patterns.
2.0.8
Fix value overwrite in map. (#275)
2.0.7
Fixing to checks breaking rendering of DateTimeLine and TimeDeltaLine (#264) (thanks @mmrose)
Fix render_in_browser. (#266) (#268) (thanks @waixwong)
2.0.6
Avoid x label formatting when label is a string
2.0.5
Fix x label formatting
2.0.4
Fix map coloration
2.0.3
Fix label adaptation. (#256)
Fix wrong radar truncation. (#255)
2.0.2
Fix view box differently to avoid getting a null height on huge numbers. (#254)
Fix broken font_family default
Fix non namespaced svg (without embed) javascript by adding uuid in config object. (config is in window.pygal now).
2.0.1
Fix the missing title on x_labels with labels.
Auto cast to str x labels in non dual charts (#178)
Add print_labels option to print label too. (#197)
Add value_label_font_family and value_label_font_size style options for print_labels.
Default print_zeroes to True
(Re)Add xlink in desc to show on tooltip
Activate element on tooltip hovering. (#106)
Fix radar axis behaviour (#247)
Add tooltip support in metadata to add a title (#249).
Take config class options in account too.
2.0.0
Rework the ghost mechanism to come back to a more object oriented behavior, storing all state in a state object which is created on every render. (#161)
Refactor maps
Add world continents
Add swiss cantons map (thanks @sergedroz)
Add inverse_y_axis options to reverse graph (#24)
Fix DateTimeLine time data loss (#193)
Fix no data for graphs with only zeroes (#148)
Support value formatter for pie graphs (#218) (thanks @never-eat-yellow-snow)
Add new Box plot modes and outliers and set extremes as default (#226 #121 #149) (thanks @djezar)
Add secondary_range option to set range for secondary values. (#203)
Maps are now plugins, they are removed from pygal core and moved to packages (pygal_maps_world, pygal_maps_fr, pygal_maps_ch, ...) (#225)
Dot now supports negative values
Fix dot with log scale (#201)
Fix y_labels behaviour for lines
Fix x_labels and y_labels behaviour for xy like
Improve gauge a bit
Finally allow call chains on add
Transform min_scale and max_scale as options
mode option has been renamed to a less generic name: box_mode
fix stack_from_top for stacked lines
Add flake8 test to py.test in tox
Remove stroke style in style and set it as a global / serie configuration.
Fix None values in tables
Fix timezones in DateTimeLine
Rename in Style foreground_light as foreground_strong
Rename in Style foreground_dark as foreground_subtle
Add a render_data_uri method (#237)
Move font_size config to style
Add font_family for various elements in style
Add googlefont:font support for style fonts
Add tooltip_fancy_mode to revert to old tooltips
Add auto print_value color + a configurable value_colors list in style
Add guide_stroke_dasharray and guide_stroke_dasharray in style to customize guides (#242) (thanks @cbergmiller)
Refactor label processing in a _compute_x_labels and _compute_y_labels method. Handle both string and numbers for all charts. Create a Dual base chart for dual axis charts. (#236)
Better js integration in maps. Use the normal tooltip.
jperkin
pushed a commit
that referenced
this issue
Mar 20, 2017
## 2.0.7 (2017-03-19) * Do not modify BasicObject during template compilation on ruby 2.0+ (#309, jeremyevans) ## 2.0.6 (2017-01-26) * Add support for LiveScript (#286, @Announcement Jacob Francis Powers) * Add support for Sigil (#302, winebarrel) * Add support for Erubi (#308, jeremyevans) * Add support for options in Liquid (#298, #299, laCour) * Always sort locals by strings (#307, jeremyevans) * Fix test warnings (#305, amatsuda) * Fix indentation (#293, yui-knk) * Use SVG badges in README (#294, vasinov) * Fix typo and trailing space (#295, #296, karloescota) ## 2.0.5 (2016-06-02) * Add support for reST using Pandoc (#284, mfenner) * Make lazy loading thread-safe; remove warning (judofyr) ## 2.0.4 (2016-05-16) * Fix regression in BuilderTemplate (#283, judofyr) ## 2.0.3 (2016-05-12) * Add Pandoc support (#276, jmuheim) * Add CommonMark support (#282, raphink) * Add TypeScript support (#278, nghitran) * Work with frozen string literal (#274, jeremyevans) * Add MIME type for Babel (#273, SaitoWu) ## 2.0.2 (2016-01-06) * Pass options to Redcarpet (#250, hughbien) * Haml: Improve error message on frozen self (judofyr) * Add basic support for Babel (judofyr) * Add support for .litcoffee (#243, judofyr, mr-vinn) * Document Tilt::Cache (#266, tommay) * Sort local keys for better caching (#257, jeremyevans) * Add more CSV options (#256, Juanmcuello) * Add Prawn template (kematzy) * Improve cache-miss performance in Tilt::Cache (#251, tommay) * Add man page (#241, josephholsten) * Support YAML/JSON data in bin/tilt (#241, josephholsten) ## 2.0.1 (2014-03-21) * Fix Tilt::Mapping bug in Ruby 2.1.0 (9589652c569760298f2647f7a0f9ed4f85129f20) * Fix `tilt --list` (#223, Achrome) * Fix circular require (#221, amarshall) ## 2.0.0 (2013-11-30) * Support Pathname in Template#new (#219, kabturek) * Add Mapping#templates_for (judofyr) * Support old-style #register (judofyr) * Add Handlebars as external template engine (#204, judofyr, jimothyGator) * Add org-ruby as external template engine (#207, judofyr, minad) * Documentation typo (#208, elgalu) ## 2.0.0.beta1 (2013-07-16) * Documentation typo (#202, chip) * Use YARD for documentation (#189, judofyr) * Add Slim as an external template engine (judofyr) * Add Tilt.templates_for (#121, judofyr) * Add Tilt.current_template (#151, judofyr) * Avoid loading all files in tilt.rb (#160, #187, judofyr) * Implement lazily required templates classes (#178, #187, judofyr) * Move #allows_script and default_mime_type to metadata (#187, judofyr) * Introduce Tilt::Mapping (#187, judofyr) * Make template compilation thread-safe (#191, judofyr)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I notice nginx is missing from Darwin 2015Q2 and 2015Q3. Was this intentional?
The text was updated successfully, but these errors were encountered: