Links to LibrePilot wiki

UncleRus · Nov 24, 2015 · 8c6f7e1 · 8c6f7e1
1 parent 964f444
commit 8c6f7e1
Show file tree

Hide file tree

Showing 6 changed files with 17 additions and 23 deletions.
diff --git a/README.rst b/README.rst
@@ -1,8 +1,5 @@
-OpenPilot archived wiki
-=======================
-
-All text information still available in Google cache, but most pictures and
-all attachement files was lost :(.
+OpenPilot/Librepilot Wiki
+=========================
 
 See this docs on `ReadTheDocs <http://opwiki.readthedocs.org/en/latest/>`_
 
diff --git a/source/conf.py b/source/conf.py
@@ -46,7 +46,7 @@
 
 
 # General information about the project.
-project = u'OpenPilot Wiki'
+project = u'OpenPilot/LibrePilot Wiki'
 
 copyright = u'OpenPilot/LibrePilot community'
 

diff --git a/source/index.rst b/source/index.rst
@@ -1,8 +1,6 @@
-.. OpenPilot Wiki master file
-
-#################################
-Welcome to OpenPilot Wiki archive
-#################################
+####################################
+Welcome to OpenPilot/LibrePilot Wiki
+####################################
 
 .. toctree::
    :maxdepth: 2

diff --git a/source/user_manual/first_flight.rst b/source/user_manual/first_flight.rst
@@ -40,9 +40,9 @@ Check your stick inputs
 **With props removed**, after you have armed your board, the blue LED should
 start flashing rapidly indicating that the board is armed. If you have
 specified that the "motors should spin at neutral output" in the
-:doc:`output configuration </gcs/output>`, the motors should start spinning
-right now. Otherwise you can now apply some throttle and get the motors
-spinning.
+`output configuration <https://librepilot.atlassian.net/wiki/display/LPDOC/Output+Configuration>`_,
+the motors should start spinning right now. Otherwise you can now apply some
+throttle and get the motors spinning.
 
 Verify that the correct motors follow your stick input. E.g. rolling left
 should increase the throttle on your right motor(s) and vice versa. If the
@@ -100,8 +100,9 @@ a problem.
 
 The following steps have been written on the assumption that 'Zero gyros while
 arming aircraft' has been selected on the
-:doc:`Attitude Configuration </gcs/attitude>` page of GCS (the recommended
-setting). This can help with the stabilization of the model.
+`Attitude Configuration <https://librepilot.atlassian.net/wiki/display/LPDOC/Attitude+Configuration>`_
+page of GCS (the recommended setting). This can help with the stabilization of
+the model.
 
 .. note:: Remember to keep the model still for several seconds after arming,
    while the gyros are zeroed.

diff --git a/source/user_manual/index.rst b/source/user_manual/index.rst
@@ -1,6 +1,6 @@
-*********************
-OpenPilot User Manual
-*********************
+********************************
+OpenPilot/LibrePilot User Manual
+********************************
 
 .. toctree::
    :maxdepth: 2
@@ -21,9 +21,7 @@ OpenPilot User Manual
 
    Use `LibrePilot <http://www.librepilot.org/>`_ instead.
 
-Welcome to the OpenPilot User Manual!
-
-We've designed this section and the OpenPilot Documentation as a whole to flow
+We've designed this section and the OpenPilot/LibrePilot Documentation as a whole to flow
 like a story, guiding you through all the steps necessary for successful setup
 and flight.
 

diff --git a/source/user_manual/revo/revo.rst b/source/user_manual/revo/revo.rst
@@ -53,7 +53,7 @@ Sensor calibration
 Tuning your Revolution
 ----------------------
 
-:doc:`/gcs/configuration`
+`LibrePilot Wiki <https://librepilot.atlassian.net/wiki/display/LPDOC/Configuration+tab>`_
 
 Connection diagram
 ------------------