Skip to content

Known hardware configurations

ArnieO edited this page Apr 26, 2024 · 23 revisions

Note

The table is too wide for the page. The rightmost columns can be seen by dragging the handle at the bottom of the table.

Smart meter manufacturer Model Interface socket Baud rate Parity Encryption Physical signal interface Known countries
Note 1
Payload protocol Standard Our product
Aidon with built-in interface 6442, 6490, 6492 RJ11/12 115200 8N1 No Open collector Sweden P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Aidon with built-in interface 65xx, 6474, 6476, 6477, 6479, 6484 RJ45 ("Ethernet") 2400 8E1 No M-bus 24/12V (HAN-NVE) Norway, Sweden HAN-NVE (HDLC/DLMS/COSEM) EN-IEC 62056-7-5 Pow-U with RJ45 cable
Aidon with Rejlers Politerm interface 65xx, 6474, 6476, 6477, 6479, 6484 RJ45 ("Ethernet") 2400 8N1 No M-bus 24/12V (HAN-NVE) Norway HAN-NVE (HDLC/DLMS/COSEM) EN-IEC 62056-7-5 Pow-U with RJ45 cable
Iskraemeco AM550 RJ11/12 115200 8N1 No Open collector P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Kaifa/Nuri "MA105H2E MA304H3E MA304H4 MA304T3 MA304T4" RJ45 ("Ethernet") 2400 8E1 No M-bus 24/12V (HAN-NVE) Norway HAN-NVE (HDLC/DLMS/COSEM) EN-IEC 62056-7-5 Pow-U with RJ45 cable
Kaifa/Nuri MA309M RJ11/12 2400 8N1 Country / Network operator dependent M-bus 34/22V Austria HDLC/DLMS/COSEM Pow-U with RJ12 cable
Kamstrup Omnia Omnia E-meter RJ11/12 115200 8N1 No Open collector Denmark, Sweden P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Kamstrup Omnipower with HAN-NVE adapter 684xx2, 684xx3, 685xx2, 685xx3, 686xx1, C65 RJ45 ("Ethernet") 2400 8N1 Country / Network operator dependent M-bus 24/12V (HAN-NVE) Norway, Sweden, Denmark, Switzerland HDLC/DLMS/COSEM EN-IEC 62056-7-5 Pow-U with RJ45 cable
Note 2
Kamstrup Omnipower with P1 adapter 684xx2, 684xx3, 685xx2, 685xx3, 686xx1, C65 RJ11/12 115200 8N1 No Open collector Denmark, Sweden P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable and modification (Notify us when ordering)
Note 3
Kamstrup Omnipower, without adapter, HAN-NVE configuration 684xx2, 684xx3, 685xx2, 685xx3, 686xx1, C65 6-pin plug in expansion bay 2400 8N1 Country / Network operator dependent TTL 3.3V Norway, Sweden, Denmark, Switzerland HDLC/DLMS/COSEM EN-IEC 62056-7-5 Pow-K
Kamstrup Omnipower, without adapter, P1 configuration 684xx2, 684xx3, 685xx2, 685xx3, 686xx1, C65 6-pin plug in expansion bay 115200 8N1 No TTL 3.3V Sweden, Denmark ? P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-K
Landis & Gyr with Embriq Politerm800 module E350 RJ45 2400 8N1 No M-bus 24/12V (HAN-NVE) Norway (Klive nett) HAN-NVE (HDLC/DLMS/COSEM) EN-IEC 62056-7-5 Pow-U with RJ45 cable
Landis & Gyr E360 RJ11/12 115200 8N1 No Open collector Sweden, Denmark, P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Landis + Gyr E450 S4, S5 RJ11/12 2400 8E1 Country / Network operator dependent M-bus 34/22V Austria, Switzerland HDLC/DLMS/COSEM Pow-U with RJ12 cable
Landis + Gyr E450 S4, S5 RJ11/12 2400 8N1 Country / Network operator dependent M-bus 24/12V Austria: Netz Burgenland Network operator specific (ASCII) Pow-U with RJ12 cable
NES G5 83335-X RJ11/12 115200 8N1 No Open collector Denmark P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Sagemcom S211, T211 RJ11/12 115200 8N1 No Open collector Sweden P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Sagemcom T210-D, S210 RJ11/12 2400 8N1 Country / Network operator dependent M-bus 34/22V (Is this wrong?) Austria HDLC/DLMS/COSEM Pow-U with RJ12 cable
Sanxing S34U18 RJ11/12 115200 8N1 No Open collector Sweden P1-DSMR v5.0.2 EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable
Sanxing S34U18 RJ11/12 115200 8N1 No Open collector Hungary EON payload EN-IEC 62056-21 Mode D Pow-P1 with RJ12 cable

Note

Note 1: Please notify us if other countries should be added to the table!

Note 2: Might need USB power to operate. For Kamstrup Omnipower meters we recommend using Pow-K (without using the HAN-NVE module). Pow-U + RJ45 cable can be a solution in cases where there is no Wi-Fi coverage at the location of the power meter.

Note 3: Needs USB power to operate, as the Kamstrup HAN-P1 adapter does not deliver power. For Kamstrup Omnipower meters we recommend using Pow-K (without using the HAN-P1 module). A modified Pow-P1 + RJ12 cable can be a solution in cases where there is no Wi-Fi coverage at the location of the power meter.