v2021.11.11

What's Changed

• New internetcube install process by @alexAubin in #7
• Merge upstream by @alexAubin in #10

New Contributors

• @alexAubin made their first contribution in #7

Full Changelog: v2021.02...v2021.11.11

v2021.04.01.new_internetcube_install

Bump internet cube install process

New internet cube install beta 29/03/2020

v2021.03.29.test_new_internetcube_install

Bump internetcube install process submodule

Alpha release

Alpha release

• Base on Yunohost 4.1.7.1
• New installation process for InternetCube ! No more hypercube needed, just your provider cube file
  • Just flash with dd if=internetcube_4.1.7.4_v2021.03.14.test_new_internetcube_install_lime2.img of=/dev/sdX oflag=direct bs=1M status=progress
  • Then boot your board and go directly to https://internetcube.local
  • Fill the form with a .cube (openvpn config)
• Supported board are lime, lime2, orangepipcplus

Known issues

• Form fields aren't escaped properly, beware of special characters
• Wifi network isn't enabled at the end of the installation
• You can't edit the form after a error occured during the installation, you need to reflash

v2021.02

• Base on Yunohost 4.1.7.1
• Internetcube old installation process
• Supported board are lime, lime2, orangepipcplus

v2021.01-ynh4.1-beta1

Merge remote-tracking branch 'upstream/master' into upstream-upgrade-…

…using-merge

v2020.12-alpha

Alpha release

• Base on Yunohost 4.0.8.3
• New installation process for InternetCube ! No more hypercube needed, just your provider cube file
  • Just flash with dd if=internetcube_4.0.8.3_v2020.12-alpha_lime2.img of=/dev/sdX oflag=direct bs=1M status=progress
  • Then boot your board and go directly to https://internetcube.local
  • Fill the form with a .cube (openvpn config)
• Supported board are lime, lime2, orangepipcplus

Known issues

• Form fields aren't escaped properly, beware of special characters
• Wifi network isn't enabled at the end of the installation
• You can't edit the form after a error occured during the installation, you need to reflash

v2020.10

• Based on Yunohost 4.0.8
• Use Armbian Debian as base

v2020.08-rc

• Yunohost v4.0.6.x
• Board: Lime, Lime2, OrangePiPCPlus
• It's a release candidate, first build based on Armbian Buster and linux kernel 5.x

v2020.06

• Yunohost v3.8.4.8
• Board: Lime, Lime2, OrangePiPCPlus
• Tested and ok