How to enable Cartesian Pose Controller in fetch driver

[ljklonepiece]

Hi there,
in robot_controllers pkg, there is a class called CartesianPoseController.
It seems that this function has not been activated in fetch_drivers or fetch_bringup, may I know how I can use this class? since I think it may be useful to execute a short straight line path directly without external planner (such as by Moveit!)

Comments are welcome!

[glebshevchukk]

Also running into this issue. Adding arm_controller/cartesian_pose to fetch_bringup/config/default_controllers.yaml and restarting the robot service does not start it.

Running the following does not work:

or:
~~~~ rosrun robot_controllers_interface start_controller.py arm_controller/cartesian_wrench~~~~

Although the following does:
~~~~ rosrun robot_controllers_interface start_controller.py arm_controller/cartesian_twist~~~~

It seems that the arm_controller/cartesian_twist/command topic is being subscribed to by robot_driver (which is called in fetch_bringup/launch/fetch.launch), but we cannot edit this. Is there a way to do a hard reset of fetch_bringup?

Any advice on how to proceed?

[mikeferguson]

I'm actually not sure if the cartesian pose controller has ever been tested - there may be issues in the underlying code...

[glebshevchukk]

Thanks @mikeferguson for the quick reply. I will try to get it active and test it over the weekend.

[ljklonepiece]

Also running into this issue. Adding arm_controller/cartesian_pose to fetch_bringup/config/default_controllers.yaml and restarting the robot service does not start it.

Running the following does not work:

or:
~~~~ rosrun robot_controllers_interface start_controller.py arm_controller/cartesian_wrench~~~~

Although the following does:
~~~~ rosrun robot_controllers_interface start_controller.py arm_controller/cartesian_twist~~~~

It seems that the arm_controller/cartesian_twist/command topic is being subscribed to by robot_driver (which is called in fetch_bringup/launch/fetch.launch), but we cannot edit this. Is there a way to do a hard reset of fetch_bringup?

Any advice on how to proceed?

I wrote a cartesian PD controller myself, you may want to try it out
https://github.com/ljklonepiece/fetch_cartesian_control.git

you may want to adjust the parameters in cart_server.py for better speed.
let me know if this works for u

[ljklonepiece]

great to hear it works for u! unfortunately, i have not yet tried in simulation Yours sincerely, Juekun PhD Candidate, School of Computing National University of Singapore

…

On Sun, Oct 21, 2018 at 6:26 AM glebshevchukk ***@***.***> wrote: @ljklonepiece <https://github.com/ljklonepiece> Thanks for sharing the library, it works on our real Fetch! I think you did the right thing with sending converted positions to the cartesian_twist command topic. Interestingly, in simulation, I'm running into the issue described in ZebraDevs/fetch_gazebo#19 <ZebraDevs/fetch_gazebo#19>, which prevents the cartesian_twist controller from working properly. Did you happen to run into this? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#35 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AFUWk-5PbpwD3TxYtWRsZsr-qo-CzWLhks5um6MKgaJpZM4SoI-u> .