Example site.def which should be renamed to site.def for releases.

git-svn-id: svn://anonsvn.mit.edu/krb5/trunk@3365 dc483132-0cff-0310-8789-dd5450dbe970

src/config/site.def

@@ -217,6 +217,11 @@
    			  (might want to be in the architecture-specific
 			   configuration file) */
 
+/* If you have the Hash library it will enable the GSSAPI validation code.
+   It will make the GSSAPI library more robust, but it is not strictly 
+   necessary. */
+#define HasHashLibrary NO
+
 #if 0
 /* alternate library search paths, if needed for some system libraries */
 #define LdLibLocations -L/usr/athena/lib

src/config/site.def.example

@@ -0,0 +1,274 @@
+/**/# $Source$
+/**/# $Author$
+/**/# $Id$
+/**/#
+
+/**/# site:  $XConsortium: site.def,v 1.21 89/12/06 11:46:50 jim Exp $
+
+/*****************************************************************************
+ *                                                                           *
+ *			   SITE-SPECIFIC DEFINITIONS                         *
+ *                                                                           *
+ * Override any of the defaults in *.tmpl here.                              *
+ *                                                                           *
+ *                                                                           *
+ * Make sure you check the following parameters:                             *
+ *                                                                           *
+ *     1.  HasLargeTmp                                                       *
+ *     2.  All the manpage locations & suffixes                              *
+ *     3.  All the binary install locations                                  *
+ *                                                                           *
+ * Note on using DESTDIR:  If you want to install into a scratch directory   *
+ * but will eventually move the tree back to the root, compile with DESTDIR  *
+ * blank and install with "make install DESTDIR=directory".                  *
+ *                                                                           *
+ *****************************************************************************/
+
+
+/* General */
+#define InstKmemFlag	-g kmem -m 2755
+#define StripInstalledPrograms	YES
+#define InstUidFlags	-o root -m 4755
+
+/*
+ * SET THESE PARAMETERS FIRST !!!
+ */
+
+/*
+ * 1.  HasLargeTmp - if your /tmp space is less than a 1meg, you should
+ * probably set this to NO
+ */
+#ifndef HasLargeTmp
+#define HasLargeTmp YES
+#endif
+
+/*
+ * 2. Man page locations & suffixes.
+ */
+/* AdminManSuffix: man page suffix for administrative programs */
+#ifndef AdminManSuffix
+#define AdminManSuffix 8
+#endif
+/* AdminMandir: manual page directory for administrative man pages */
+#ifndef AdminMandir
+#define AdminMandir $(KRB5ROOT)/man/man$(ADMIN_MANSUFFIX)
+#endif
+
+/* ServerManSuffix: man page suffix for server programs */
+#ifndef ServerManSuffix
+#define ServerManSuffix 8
+#endif
+/* ServerMandir: manual page directory for server man pages */
+#ifndef ServerMandir
+#define ServerMandir $(KRB5ROOT)/man/man$(SERVER_MANSUFFIX)
+#endif
+
+/* ClientManSuffix: man page suffix for client programs */
+#ifndef ClientManSuffix
+#define ClientManSuffix 1
+#endif
+/* ClientMandir: manual page directory for client man pages */
+#ifndef ClientMandir
+#define ClientMandir $(KRB5ROOT)/man/man$(CLIENT_MANSUFFIX)
+#endif
+
+/* FileManSuffix: man page suffix for files */
+#ifndef FileManSuffix
+#define FileManSuffix 5
+#endif
+/* FileMandir: manual page directory for file man pages */
+#ifndef FileMandir
+#define FileMandir $(KRB5ROOT)/man/man$(FILE_MANSUFFIX)
+#endif
+
+/*
+ * 3. Binary program install areas.
+ */
+/* AdminBindir: binary install directory for administrative programs */
+#ifndef AdminBindir
+#define AdminBindir $(KRB5ROOT)/admin
+#endif
+
+/* ServerBindir: binary install directory for server programs */
+#ifndef ServerBindir
+#define ServerBindir $(KRB5ROOT)/sbin
+#endif
+
+/* ClientBindir: binary install directory for client programs */
+#ifndef ClientBindir
+#define ClientBindir $(KRB5ROOT)/bin
+#endif
+
+/* Libdir: install directory for kerberos libraries */
+#ifndef Krb5Libdir
+#define	Krb5Libdir $(KRB5ROOT)/lib
+#endif
+
+#ifndef Krb5Incdir
+#define	Krb5Incdir $(KRB5ROOT)/include
+#endif
+/*****************************************************************************
+ *                                                                           *
+ *			       Build Parameters                              *
+ *                                                                           *
+ *****************************************************************************/
+
+/*
+ * If you want to use GCC, set HasGcc in the appropriate .cf files.
+ */
+#ifndef HasGcc
+#define HasGcc NO
+#endif
+
+/*
+ * If you want to use VPATH to do makefile building, set it here.
+ */
+#undef Use_VPATH
+
+/* With gcc, use -g -O.  Otherwise use the default (-O). */
+#if !defined(DefaultCDebugFlags) && HasGcc
+#define DefaultCDebugFlags OptimizedCDebugFlags DebuggableCDebugFlags
+#endif
+
+/* If you have the Hesiod software and libraries installed, and want to
+   use it in some application programs, then turn these on.  If they're
+   not turned on, they are left empty in Project.tmpl */
+#define HesiodDefines -DHESIOD
+#define HesiodLibs /usr/athena/lib/libhesiod.a
+
+#if 0
+/* not yet in use, but maybe someday... */
+/* If you have the Zephyr software and libraries installed, and want to
+   use it in some application programs, then turn these on.  If they're
+   not turned on, they are left empty in Project.tmpl.
+
+   NOTE:  You must have Kerberos v4 in order to use Zephyr.
+ */
+#define ZephyrDefines -DZEPHYR
+#define ZephyrLibs -lzephyr
+#endif
+
+/* define IsodeLib to be what you pass to the loader to find the ISODE
+   library.  This might want to be -lisode if you have it installed.
+   IsodeDir is put into the 'make' variable ISODE. */
+
+#define IsodeDir /mit/isode/isode-7.0
+#define IsodeLib /mit/isode/isode-7.0/@sys/lib/libisode.a
+#define IsodeIncls /mit/isode/isode-7.0/@sys/include
+
+/*
+ * #define ISODE 7 only if you are using ISODE 7.0 or later.
+ */
+#define ISODE7
+
+/* Re-define PepsyCmd if pepsy isn't in your search path. */
+
+#define PepsyCmd IsodeDir/@sys/bin/pepsy
+
+#define UseImakeInstalled /* -- turn on if you have imake installed */
+#define UseMakedependInstalled /* -- turn on if you have makedepend installed */
+
+/* #define Krb4ApplCompat /* turn this on if you want selected applications to
+			  work with both v4 & v5 code */
+/* #define Krb4KDCCompat /* turn this on if you want the KDC to provide v4
+			 tickets from a v5 database */
+/* #define Krb4Includes <empty>	-- If you don't want to use our copy of the
+   				   Kerberos V4 include files, set this to
+				   an empty name, by using the /**/
+/* 				   trick */
+/* #define Krb4LibList -lquux  -- If -lkrb -ldes is NOT the right thing
+   				  to get V4 libraries, define it here
+				  to something else */
+
+/* #define Krb4LibList /usr/athena/lib/libkrb.a $(KLIBLOC) -l$(DES425LIB) */
+/* #define Krb4KdbList /usr/athena/lib/libkdb.a */
+
+/* the following might want to be put into a specific architecture
+   definition file */
+
+/*
+ * If yes, you have vfprintf/vsprintf in libc (might want to be in the
+ * architecture-specific configuration file) 
+ */
+/* #define HasVfprintf YES */ 
+
+/*
+ * If yes, you have vsyslog in libc (might want to be in the
+ * architecture-specific configuration file) 
+ */
+/* #define HasVsyslog YES */
+
+/*
+ * If yes, you have strdup in libc (might want to be in the
+ * architecture-specific configuration file) 
+ */
+/* #define HasStrdup  YES */
+
+/*
+ * If yes, you have strerror in libc (might want to be in the
+ * architecture-specific configuration file) 
+ */
+/* #define HasStrerror  YES */
+
+/*
+ * If yes, you have memmove in libc (might want to be in the
+ * architecture-specific configuration file) 
+ */
+/* #define HasMemmove  YES */
+
+/* 
+ * If you have the Hash library it will enable the GSSAPI validation code.
+ * It will make the GSSAPI library more robust, but it is not strictly 
+ * necessary.
+ */
+#define HasHashLibrary NO
+
+/* alternate library search paths, if needed for some system libraries */
+/* #define LdLibLocations -L/usr/athena/lib */
+
+/* additional include paths, if needed, such as those needed
+   to get special include files, like Kerberos V4 include files */
+/* #define	StandardIncludes -I/usr/athena/include */
+
+#if defined(AIXArchitecture) && OSMajorVersion == 3
+#define	StandardDefines	-D_ALL_SOURCE
+/* For all its flaws, gmake has one advantage over AIX make: it supports
+   VPATH in the way the Kerberos config files want.   WARNING: if you combine
+   RCS and VPATH with gmake will will probably lose.  */
+#define MakeCmd gmake
+.SUFFIXES:
+.SUFFIXES: .et .c .h .o
+
+#undef LdLibLocations
+#define LdLibLocations -L/usr/athena/lib/shared -L/mit/krb5/rsaix/lib/shared
+#endif
+
+#define	AthenaEnv NO		/* Define this if you are in the
+				   athena environment.
+				   No one else should define this.  */
+
+/* Define BuildGssapi to be YES if you want to build GSSAPI.  Note: GSSAPI
+   doesn't build with C compilers that don't support full ANSI C.  
+   For example, the Ultrix C compiler.  GCC, however, does work. */
+
+#if HasGcc
+#define BuildGssapi YES
+#else
+#define BuildGssapi NO
+#endif
+
+/* Define this if you are building for multiple architectures or operating
+   systems.  This tells the build where to look for the sources.  */
+#ifndef UseInstalled
+/* #define SourceTop /u1/krb5/sandbox/build */
+#endif
+
+#if defined(VaxArchitecture) && defined(UltrixArchitecture)
+#undef STDCTopIncludes
+#undef CcCmd
+#define CcCmd gcc -pedantic -pipe -Wall -fpcc-struct-return
+#define	OptimizedCDebugFlags -O3
+#define DefaultCDebugFlags OptimizedCDebugFlags -g
+#endif
+
+