Skip to content

Howto:Tunig

Jump to bottom
akira_you edited this page Apr 14, 2016 · 2 revisions

YukkuriCut have 2 tuning parameters

  1. heater Current(A)
  2. FreedRate(mm/sec)

This two parameters are related directly.Here is my result. graph

0.05mm/s difference of feed rate makes deformation slightly.(Angles get to be rounded corners) So the linear approximation is good enough.

It means you have to find optimal feed rate at 1A and 2A.Then simple Liner approximation is good to use.

*Tuning tool tool/tuning.py is for making tuning G-code. See the script for more details.

Contact : @akira_you　　Ask in Japanese language is also welcome.

Clone this wiki locally