Skip to content

Commit

Permalink
hwmon: (aquacomputer_d5next) Add support for temperature sensor offsets
Browse files Browse the repository at this point in the history 
Add support for reading and writing temperature sensor offsets
on the Aquacomputer D5 Next, Farbwerk 360, Octo and Quadro,
for which the needed offsets are known. Implemented by
Leonard Anderweit [1].

[1] #22

Originally-from: Leonard Anderweit <leonard.anderweit@gmail.com>
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
  • Loading branch information
@aleksamagicka
aleksamagicka committed Nov 7, 2022
1 parent 48df3f4 commit 237dd99
Showing 1 changed file with 75 additions and 13 deletions.
88 changes: 75 additions & 13 deletions aquacomputer_d5next.c
View file
Expand Up @@ -80,6 +80,7 @@ static u8 secondary_ctrl_report[] = {
#define D5NEXT_5V_VOLTAGE 0x39
#define D5NEXT_12V_VOLTAGE 0x37
#define D5NEXT_CTRL_REPORT_SIZE 0x329
#define D5NEXT_TEMP_CTRL_OFFSET 0x2D
static u8 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };

/* Pump and fan speed registers in D5 Next control report (from 0-100%) */
Expand All @@ -94,6 +95,8 @@ static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
#define FARBWERK360_SENSOR_START 0x32
#define FARBWERK360_NUM_VIRTUAL_SENSORS 16
#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a
#define FARBWERK360_CTRL_REPORT_SIZE 0x682
#define FARBWERK360_TEMP_CTRL_OFFSET 0x8

/* Register offsets for the Octo fan controller */
#define OCTO_POWER_CYCLES 0x18
Expand All @@ -103,6 +106,7 @@ static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 };
#define OCTO_NUM_VIRTUAL_SENSORS 16
#define OCTO_VIRTUAL_SENSORS_START 0x45
#define OCTO_CTRL_REPORT_SIZE 0x65F
#define OCTO_TEMP_CTRL_OFFSET 0xA
static u8 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };

/* Fan speed registers in Octo control report (from 0-100%) */
Expand All @@ -117,6 +121,7 @@ static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0
#define QUADRO_VIRTUAL_SENSORS_START 0x3c
#define QUADRO_CTRL_REPORT_SIZE 0x3c1
#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
#define QUADRO_TEMP_CTRL_OFFSET 0xA
static u8 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };

/* Fan speed registers in Quadro control report (from 0-100%) */
Expand Down Expand Up @@ -282,6 +287,7 @@ struct aqc_data {
int temp_sensor_start_offset;
int num_virtual_temp_sensors;
int virtual_temp_sensor_start_offset;
u16 temp_ctrl_offset;
u16 power_cycle_count_offset;
u8 flow_sensor_offset;

Expand Down Expand Up @@ -365,8 +371,8 @@ static int aqc_send_ctrl_data(struct aqc_data *priv)
return ret;
}

/* Refreshes the control buffer and returns value at offset */
static int aqc_get_ctrl_val(struct aqc_data *priv, int offset)
/* Refreshes the control buffer and stores value at offset in val */
static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val)
{
int ret;

Expand All @@ -376,7 +382,7 @@ static int aqc_get_ctrl_val(struct aqc_data *priv, int offset)
if (ret < 0)
goto unlock_and_return;

ret = get_unaligned_be16(priv->buffer + offset);
*val = (s16)get_unaligned_be16(priv->buffer + offset);

unlock_and_return:
mutex_unlock(&priv->mutex);
Expand All @@ -393,7 +399,7 @@ static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val)
if (ret < 0)
goto unlock_and_return;

put_unaligned_be16((u16)val, priv->buffer + offset);
put_unaligned_be16((s16)val, priv->buffer + offset);

ret = aqc_send_ctrl_data(priv);

Expand All @@ -408,8 +414,28 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3

switch (type) {
case hwmon_temp:
if (channel < priv->num_temp_sensors) {
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
case hwmon_temp_offset:
if (priv->temp_ctrl_offset != 0)
return 0644;
break;
default:
break;
}
}

if (channel < priv->num_temp_sensors + priv->num_virtual_temp_sensors)
return 0444;
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
default:
break;
}
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets && channel < priv->num_fans) {
Expand Down Expand Up @@ -492,10 +518,25 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,

switch (type) {
case hwmon_temp:
if (priv->temp_input[channel] == -ENODATA)
return -ENODATA;
switch (attr) {
case hwmon_temp_input:
if (priv->temp_input[channel] == -ENODATA)
return -ENODATA;

*val = priv->temp_input[channel];
break;
case hwmon_temp_offset:
ret =
aqc_get_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_TEMP_SENSOR_SIZE, val);
if (ret < 0)
return ret;

*val = priv->temp_input[channel];
*val *= 10;
break;
default:
break;
}
break;
case hwmon_fan:
*val = priv->speed_input[channel];
Expand All @@ -505,7 +546,7 @@ static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets) {
ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel]);
ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel], val);
if (ret < 0)
return ret;

Expand Down Expand Up @@ -563,6 +604,21 @@ static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
struct aqc_data *priv = dev_get_drvdata(dev);

switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_offset:
/* Limit temp offset to +/- 15K as in the official software */
val = clamp_val(val, -15000, 15000) / 10;
ret =
aqc_set_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_TEMP_SENSOR_SIZE, val);
if (ret < 0)
return ret;
break;
default:
return -EOPNOTSUPP;
}
break;
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
Expand Down Expand Up @@ -597,10 +653,10 @@ static const struct hwmon_ops aqc_hwmon_ops = {

static const struct hwmon_channel_info *aqc_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
Expand Down Expand Up @@ -853,6 +909,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START;
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = D5NEXT_TEMP_CTRL_OFFSET;

priv->temp_label = label_d5next_temp;
priv->virtual_temp_label = label_virtual_temp_sensors;
Expand All @@ -867,6 +924,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->num_fans = 0;
priv->num_temp_sensors = FARBWERK_NUM_SENSORS;
priv->temp_sensor_start_offset = FARBWERK_SENSOR_START;

priv->temp_label = label_temp_sensors;
break;
case USB_PRODUCT_ID_FARBWERK360:
Expand All @@ -877,6 +935,8 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START;
priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START;
priv->buffer_size = FARBWERK360_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = FARBWERK360_TEMP_CTRL_OFFSET;

priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
Expand All @@ -893,6 +953,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;

priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
Expand All @@ -914,6 +975,7 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
priv->flow_sensor_offset = QUADRO_FLOW_SENSOR_OFFSET;
priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET;

priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
Expand Down

0 comments on commit 237dd99

Please sign in to comment.