-
Notifications
You must be signed in to change notification settings - Fork 0
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
MSP430F5529 #1
Comments
Could you tell me what's your issue with Energía? |
I do not know what problem I encountered. As in the attaching picture, the
orange words do not explain what problem I encountered. So Energia is not
working for me currently.
Thanks for helping me!
[image: 截圖 2022-10-06 下午12.18.35.png]
alvarohqr ***@***.***> 於 2022年10月6日 週四 凌晨2:33寫道:
… Could you tell me what's your issue with Energía?
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45QKCSOMUJIDVEHB4YLWBXCVZANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Mmm the picture is not displaying correctly, can you copy those orange words and post them here? |
also it might be worth checking this repo: https://github.com/DeuxVis/energia-lmic |
Below words is the orange words copy:
An error occurred while uploading the sketch.
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
Sketch uses 26386 bytes (54%) of program storage space. Maximum is 48128
bytes.
Global variables use 490 bytes (5%) of dynamic memory, leaving 7702 bytes
for local variables. Maximum is 8192 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Thanks.
alvarohqr ***@***.***> 於 2022年10月6日 週四 中午12:34寫道:
… also it might be worth checking this repo:
https://github.com/DeuxVis/energia-lmic
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45U7LD3EKSDQXEMUGULWBZJFPANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
About this repo:https://github.com/DeuxVis/energia-lmic
How can I correspond to my LoRa chip
link is my LoRa chip(
https://learn.adafruit.com/adafruit-rfm69hcw-and-rfm96-rfm95-rfm98-lora-packet-padio-breakouts
)
for example(DIO0,DIO1,NSS)
thanks.
LaunchpadRFM95
3V3 3.3V
GND GND
P1.6 DIO0
P3.5 DIO1
P3.2 SCK
P3.1 MISO
P3.0 MOSI
P7.4 RESET
P2.2 NSS
台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:19寫道:
… Below words is the orange words copy:
An error occurred while uploading the sketch.
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
Sketch uses 26386 bytes (54%) of program storage space. Maximum is 48128
bytes.
Global variables use 490 bytes (5%) of dynamic memory, leaving 7702 bytes
for local variables. Maximum is 8192 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Thanks.
alvarohqr ***@***.***> 於 2022年10月6日 週四 中午12:34寫道:
> also it might be worth checking this repo:
> https://github.com/DeuxVis/energia-lmic
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AUYG45U7LD3EKSDQXEMUGULWBZJFPANCNFSM6AAAAAAQ5G2F4A>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm using the same chip, DIOx pins corresponds to Gx pins and NSS = CS, the rest is the same. |
below is the executing error about the repo:
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
ttn-otaa:32:18: error: lmic.h: No such file or directory
compilation terminated.
exit status 1
lmic.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Have you encountered this problem before?
台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:33寫道:
… My Energia's version is 1.8.11E23. So, should I down Energia 1.8.10E23
again?
I will try the given repo.
alvarohqr ***@***.***> 於 2022年10月6日 週四 下午1:30寫道:
> I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm
> using the same chip, DIOx pins corresponds to Gx pins and NSS = CS, the
> rest is the same.
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AUYG45Q4COBTLQVJ772GHITWBZPVTANCNFSM6AAAAAAQ5G2F4A>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
After lots of adjustments, the final problem is the same as the first
problem I encountered.
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
Sketch uses 20414 bytes (42%) of program storage space. Maximum is 48128
bytes.
Global variables use 672 bytes (8%) of dynamic memory, leaving 7520 bytes
for local variables. Maximum is 8192 bytes.
An error occurred while uploading the sketch
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
So, I really don't know how to fix it. Do you have any suggestions?
台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:56寫道:
… below is the executing error about the repo:
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
ttn-otaa:32:18: error: lmic.h: No such file or directory
compilation terminated.
exit status 1
lmic.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Have you encountered this problem before?
台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:33寫道:
> My Energia's version is 1.8.11E23. So, should I down Energia 1.8.10E23
> again?
> I will try the given repo.
>
> alvarohqr ***@***.***> 於 2022年10月6日 週四 下午1:30寫道:
>
>> I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm
>> using the same chip, DIOx pins corresponds to Gx pins and NSS = CS, the
>> rest is the same.
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#1 (comment)>, or
>> unsubscribe
>> <https://github.com/notifications/unsubscribe-auth/AUYG45Q4COBTLQVJ772GHITWBZPVTANCNFSM6AAAAAAQ5G2F4A>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
|
I'm afraid not, I think it's better for you to contact the Energia team or try to port the library for Code Composer Studio. |
Hi, sorry for lots of questions. After I changed the environment to Ubuntu
18.04, I can correctly compile the code. But I still can not see this end
node alive on my ChirpStack.
So, I want to check with you. What I need to do is change the value of
DEVEUI and APPKEY, right?
thank for your help.
alvarohqr ***@***.***> 於 2022年10月6日 週四 晚上11:19寫道:
… I'm afraid not, I think it's better for you to contact the Energia team or
try to port the library for Code Composer Studio.
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45XOZUUZZSALZ3WBZ2LWB3UXFANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
That's great to hear! I got those parameters by creating and applitacion in The Things Network (TTN) platform, also you'll need a gateway device like a dragino or RAK831/2245 to send the data to the TTN. |
Another option will be switching to this repo: https://github.com/sandeepmistry/arduino-LoRa but you'll require another microcontroller and RFM95W to act as the gateway, |
My Energia's version is 1.8.11E23. So, should I down Energia 1.8.10E23
again?
I will try the given repo.
alvarohqr ***@***.***> 於 2022年10月6日 週四 下午1:30寫道:
… I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm
using the same chip, DIOx pins corresponds to Gx pins and NSS = CS, the
rest is the same.
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45Q4COBTLQVJ772GHITWBZPVTANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Did you downloaded the zip and copied the files to the libraries directory?
El mié., 5 de octubre de 2022 10:57 p. m., stan880219 <
***@***.***> escribió:
… below is the executing error about the repo:
Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
ttn-otaa:32:18: error: lmic.h: No such file or directory
compilation terminated.
exit status 1
lmic.h: No such file or directory
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Have you encountered this problem before?
台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:33寫道:
> My Energia's version is 1.8.11E23. So, should I down Energia 1.8.10E23
> again?
> I will try the given repo.
>
> alvarohqr ***@***.***> 於 2022年10月6日 週四 下午1:30寫道:
>
>> I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm
>> using the same chip, DIOx pins corresponds to Gx pins and NSS = CS, the
>> rest is the same.
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#1 (comment)>, or
>> unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/AUYG45Q4COBTLQVJ772GHITWBZPVTANCNFSM6AAAAAAQ5G2F4A
>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANHDIYB35MBE43T4RJLETW3WBZS3LANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Yes, I did!
alvarohqr ***@***.***> 於 2022年10月11日 週二 下午3:55寫道:
… Did you downloaded the zip and copied the files to the libraries directory?
El mié., 5 de octubre de 2022 10:57 p. m., stan880219 <
***@***.***> escribió:
> below is the executing error about the repo:
>
> Energia: 1.8.11E23 (Mac OS X), Board: "MSP-EXP430F5529LP"
>
> ttn-otaa:32:18: error: lmic.h: No such file or directory
> compilation terminated.
> exit status 1
> lmic.h: No such file or directory
>
> This report would have more information with
> "Show verbose output during compilation"
> option enabled in File -> Preferences.
>
> Have you encountered this problem before?
>
> 台師大張劭群 ***@***.***> 於 2022年10月6日 週四 下午1:33寫道:
>
> > My Energia's version is 1.8.11E23. So, should I down Energia 1.8.10E23
> > again?
> > I will try the given repo.
> >
> > alvarohqr ***@***.***> 於 2022年10月6日 週四 下午1:30寫道:
> >
> >> I haven't encoutered that issue, have you tried Energia 1.8.10E23? I'm
> >> using the same chip, DIOx pins corresponds to Gx pins and NSS = CS,
the
> >> rest is the same.
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <#1 (comment)>,
or
> >> unsubscribe
> >> <
>
https://github.com/notifications/unsubscribe-auth/AUYG45Q4COBTLQVJ772GHITWBZPVTANCNFSM6AAAAAAQ5G2F4A
> >
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ANHDIYB35MBE43T4RJLETW3WBZS3LANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45QHET3PCC6WFS6VCULWCUMQTANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Thank for your respond, I will keep find the problem why I can't join in
LoRaWAN. I had gateway device originally, so it is not the problem. And
this project I can only use MSP430 launchpad for energy efficiency target,
so I can not use this repo: https://github.com/sandeepmistry/arduino-LoRa.
Thank you for responding me lots of problems!
alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
… Another option will be switching to this repo:
https://github.com/sandeepmistry/arduino-LoRa but you'll require another
microcontroller and RFM95W to act as the gateway,
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
As long as you have those key you should be able to establish the
connection. Also try powering the LoRa device externally
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
escribió:
… Thank for your respond, I will keep find the problem why I can't join in
LoRaWAN. I had gateway device originally, so it is not the problem. And
this project I can only use MSP430 launchpad for energy efficiency target,
so I can not use this repo: https://github.com/sandeepmistry/arduino-LoRa.
Thank you for responding me lots of problems!
alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> Another option will be switching to this repo:
> https://github.com/sandeepmistry/arduino-LoRa but you'll require another
> microcontroller and RFM95W to act as the gateway,
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
Ok, I will try. Thanks.
alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
… As long as you have those key you should be able to establish the
connection. Also try powering the LoRa device externally
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
escribió:
> Thank for your respond, I will keep find the problem why I can't join in
> LoRaWAN. I had gateway device originally, so it is not the problem. And
> this project I can only use MSP430 launchpad for energy efficiency
target,
> so I can not use this repo:
https://github.com/sandeepmistry/arduino-LoRa.
> Thank you for responding me lots of problems!
>
> alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
>
> > Another option will be switching to this repo:
> > https://github.com/sandeepmistry/arduino-LoRa but you'll require
another
> > microcontroller and RFM95W to act as the gateway,
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#1 (comment)>,
or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you modified the open/close state.Message
> ID: ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
I still can not join to LoRaWAN, I has check everywhere. The serial port's
message is below:
Starting
Packet queued
1144: EV_JOINING
I also check deviceEUI and APPKEY many times.
Have you encountered this before? Thanks.
台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
… Ok, I will try. Thanks.
alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
> As long as you have those key you should be able to establish the
> connection. Also try powering the LoRa device externally
> *Alvaro Humberto Quiñonez Rodríguez*
>
>
> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
> escribió:
>
> > Thank for your respond, I will keep find the problem why I can't join in
> > LoRaWAN. I had gateway device originally, so it is not the problem. And
> > this project I can only use MSP430 launchpad for energy efficiency
> target,
> > so I can not use this repo:
> https://github.com/sandeepmistry/arduino-LoRa.
> > Thank you for responding me lots of problems!
> >
> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> >
> > > Another option will be switching to this repo:
> > > https://github.com/sandeepmistry/arduino-LoRa but you'll require
> another
> > > microcontroller and RFM95W to act as the gateway,
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <#1 (comment)>,
> or
> > > unsubscribe
> > > <
> >
> https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> > >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#1 (comment)>, or
> > unsubscribe
> > <
> https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
> >
> > .
> > You are receiving this because you modified the open/close state.Message
> > ID: ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
|
May I ask what frequency plan are you working on? 868 Mhz in Europe or Asia?
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
escribió:
… I still can not join to LoRaWAN, I has check everywhere. The serial port's
message is below:
Starting
Packet queued
1144: EV_JOINING
I also check deviceEUI and APPKEY many times.
Have you encountered this before? Thanks.
台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
> Ok, I will try. Thanks.
>
> alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
>
>> As long as you have those key you should be able to establish the
>> connection. Also try powering the LoRa device externally
>> *Alvaro Humberto Quiñonez Rodríguez*
>>
>>
>> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
>> escribió:
>>
>> > Thank for your respond, I will keep find the problem why I can't join
in
>> > LoRaWAN. I had gateway device originally, so it is not the problem.
And
>> > this project I can only use MSP430 launchpad for energy efficiency
>> target,
>> > so I can not use this repo:
>> https://github.com/sandeepmistry/arduino-LoRa.
>> > Thank you for responding me lots of problems!
>> >
>> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
>> >
>> > > Another option will be switching to this repo:
>> > > https://github.com/sandeepmistry/arduino-LoRa but you'll require
>> another
>> > > microcontroller and RFM95W to act as the gateway,
>> > >
>> > > —
>> > > Reply to this email directly, view it on GitHub
>> > > <#1 (comment)
>,
>> or
>> > > unsubscribe
>> > > <
>> >
>>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
>> > >
>> > > .
>> > > You are receiving this because you authored the thread.Message ID:
>> > > ***@***.***>
>> > >
>> >
>> > —
>> > Reply to this email directly, view it on GitHub
>> > <#1 (comment)>,
or
>> > unsubscribe
>> > <
>>
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
>> >
>> > .
>> > You are receiving this because you modified the open/close
state.Message
>> > ID: ***@***.***>
>> >
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#1 (comment)>, or
>> unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
>
>> .
>> You are receiving this because you authored the thread.Message ID:
>> ***@***.***>
>>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
Look this tutorial as reference:
https://www.youtube.com/watch?v=wlUs63Q7IMQ&t=670s&ab_channel=ElectronicsInnovation
It uses the same library.
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 13:10, Alvaro Qz. Rz. ***@***.***>)
escribió:
… May I ask what frequency plan are you working on? 868 Mhz in Europe or
Asia?
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
escribió:
> I still can not join to LoRaWAN, I has check everywhere. The serial port's
> message is below:
>
> Starting
> Packet queued
> 1144: EV_JOINING
> I also check deviceEUI and APPKEY many times.
> Have you encountered this before? Thanks.
>
> 台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
>
> > Ok, I will try. Thanks.
> >
> > alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
> >
> >> As long as you have those key you should be able to establish the
> >> connection. Also try powering the LoRa device externally
> >> *Alvaro Humberto Quiñonez Rodríguez*
> >>
> >>
> >> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
> >> escribió:
> >>
> >> > Thank for your respond, I will keep find the problem why I can't
> join in
> >> > LoRaWAN. I had gateway device originally, so it is not the problem.
> And
> >> > this project I can only use MSP430 launchpad for energy efficiency
> >> target,
> >> > so I can not use this repo:
> >> https://github.com/sandeepmistry/arduino-LoRa.
> >> > Thank you for responding me lots of problems!
> >> >
> >> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> >> >
> >> > > Another option will be switching to this repo:
> >> > > https://github.com/sandeepmistry/arduino-LoRa but you'll require
> >> another
> >> > > microcontroller and RFM95W to act as the gateway,
> >> > >
> >> > > —
> >> > > Reply to this email directly, view it on GitHub
> >> > > <#1 (comment)
> >,
> >> or
> >> > > unsubscribe
> >> > > <
> >> >
> >>
> https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> >> > >
> >> > > .
> >> > > You are receiving this because you authored the thread.Message ID:
> >> > > ***@***.***>
> >> > >
> >> >
> >> > —
> >> > Reply to this email directly, view it on GitHub
> >> > <#1 (comment)>,
> or
> >> > unsubscribe
> >> > <
> >>
> https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
> >> >
> >> > .
> >> > You are receiving this because you modified the open/close
> state.Message
> >> > ID: ***@***.***>
> >> >
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <#1 (comment)>,
> or
> >> unsubscribe
> >> <
> https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
> >
> >> .
> >> You are receiving this because you authored the thread.Message ID:
> >> ***@***.***>
> >>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A>
> .
> You are receiving this because you modified the open/close state.Message
> ID: ***@***.***>
>
|
I'm in Asia, and I also noticed this point. But after I use the library, it
contains AS923's frequency. It still doesn't work for me.
alvarohqr ***@***.***> 於 2022年10月19日 週三 凌晨4:11寫道:
… Look this tutorial as reference:
https://www.youtube.com/watch?v=wlUs63Q7IMQ&t=670s&ab_channel=ElectronicsInnovation
It uses the same library.
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 13:10, Alvaro Qz. Rz. ***@***.***>)
escribió:
> May I ask what frequency plan are you working on? 868 Mhz in Europe or
> Asia?
> *Alvaro Humberto Quiñonez Rodríguez*
>
>
> El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
> escribió:
>
>> I still can not join to LoRaWAN, I has check everywhere. The serial
port's
>> message is below:
>>
>> Starting
>> Packet queued
>> 1144: EV_JOINING
>> I also check deviceEUI and APPKEY many times.
>> Have you encountered this before? Thanks.
>>
>> 台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
>>
>> > Ok, I will try. Thanks.
>> >
>> > alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
>> >
>> >> As long as you have those key you should be able to establish the
>> >> connection. Also try powering the LoRa device externally
>> >> *Alvaro Humberto Quiñonez Rodríguez*
>> >>
>> >>
>> >> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
>> >> escribió:
>> >>
>> >> > Thank for your respond, I will keep find the problem why I can't
>> join in
>> >> > LoRaWAN. I had gateway device originally, so it is not the problem.
>> And
>> >> > this project I can only use MSP430 launchpad for energy efficiency
>> >> target,
>> >> > so I can not use this repo:
>> >> https://github.com/sandeepmistry/arduino-LoRa.
>> >> > Thank you for responding me lots of problems!
>> >> >
>> >> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
>> >> >
>> >> > > Another option will be switching to this repo:
>> >> > > https://github.com/sandeepmistry/arduino-LoRa but you'll require
>> >> another
>> >> > > microcontroller and RFM95W to act as the gateway,
>> >> > >
>> >> > > —
>> >> > > Reply to this email directly, view it on GitHub
>> >> > > <
#1 (comment)
>> >,
>> >> or
>> >> > > unsubscribe
>> >> > > <
>> >> >
>> >>
>>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
>> >> > >
>> >> > > .
>> >> > > You are receiving this because you authored the thread.Message
ID:
>> >> > > ***@***.***>
>> >> > >
>> >> >
>> >> > —
>> >> > Reply to this email directly, view it on GitHub
>> >> > <#1 (comment)
>,
>> or
>> >> > unsubscribe
>> >> > <
>> >>
>>
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
>> >> >
>> >> > .
>> >> > You are receiving this because you modified the open/close
>> state.Message
>> >> > ID: ***@***.***>
>> >> >
>> >>
>> >> —
>> >> Reply to this email directly, view it on GitHub
>> >> <#1 (comment)>,
>> or
>> >> unsubscribe
>> >> <
>>
https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
>> >
>> >> .
>> >> You are receiving this because you authored the thread.Message ID:
>> >> ***@***.***>
>> >>
>> >
>>
>> —
>> Reply to this email directly, view it on GitHub
>> <#1 (comment)>, or
>> unsubscribe
>> <
https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A
>
>> .
>> You are receiving this because you modified the open/close state.Message
>> ID: ***@***.***>
>>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45XRR2S5DRFIPZEUZZTWD4AARANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Try this one:
https://github.com/zakibakar75/arduino-lmic-as923/tree/master/src/lmic
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 22:20, stan880219 ***@***.***>)
escribió:
… I'm in Asia, and I also noticed this point. But after I use the library, it
contains AS923's frequency. It still doesn't work for me.
alvarohqr ***@***.***> 於 2022年10月19日 週三 凌晨4:11寫道:
> Look this tutorial as reference:
>
>
https://www.youtube.com/watch?v=wlUs63Q7IMQ&t=670s&ab_channel=ElectronicsInnovation
> It uses the same library.
> *Alvaro Humberto Quiñonez Rodríguez*
>
>
> El mar, 18 oct 2022 a las 13:10, Alvaro Qz. Rz. ***@***.***>)
> escribió:
>
> > May I ask what frequency plan are you working on? 868 Mhz in Europe or
> > Asia?
> > *Alvaro Humberto Quiñonez Rodríguez*
> >
> >
> > El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
> > escribió:
> >
> >> I still can not join to LoRaWAN, I has check everywhere. The serial
> port's
> >> message is below:
> >>
> >> Starting
> >> Packet queued
> >> 1144: EV_JOINING
> >> I also check deviceEUI and APPKEY many times.
> >> Have you encountered this before? Thanks.
> >>
> >> 台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
> >>
> >> > Ok, I will try. Thanks.
> >> >
> >> > alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
> >> >
> >> >> As long as you have those key you should be able to establish the
> >> >> connection. Also try powering the LoRa device externally
> >> >> *Alvaro Humberto Quiñonez Rodríguez*
> >> >>
> >> >>
> >> >> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
> >> >> escribió:
> >> >>
> >> >> > Thank for your respond, I will keep find the problem why I can't
> >> join in
> >> >> > LoRaWAN. I had gateway device originally, so it is not the
problem.
> >> And
> >> >> > this project I can only use MSP430 launchpad for energy
efficiency
> >> >> target,
> >> >> > so I can not use this repo:
> >> >> https://github.com/sandeepmistry/arduino-LoRa.
> >> >> > Thank you for responding me lots of problems!
> >> >> >
> >> >> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> >> >> >
> >> >> > > Another option will be switching to this repo:
> >> >> > > https://github.com/sandeepmistry/arduino-LoRa but you'll
require
> >> >> another
> >> >> > > microcontroller and RFM95W to act as the gateway,
> >> >> > >
> >> >> > > —
> >> >> > > Reply to this email directly, view it on GitHub
> >> >> > > <
> #1 (comment)
> >> >,
> >> >> or
> >> >> > > unsubscribe
> >> >> > > <
> >> >> >
> >> >>
> >>
>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> >> >> > >
> >> >> > > .
> >> >> > > You are receiving this because you authored the thread.Message
> ID:
> >> >> > > ***@***.***>
> >> >> > >
> >> >> >
> >> >> > —
> >> >> > Reply to this email directly, view it on GitHub
> >> >> > <
#1 (comment)
> >,
> >> or
> >> >> > unsubscribe
> >> >> > <
> >> >>
> >>
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
> >> >> >
> >> >> > .
> >> >> > You are receiving this because you modified the open/close
> >> state.Message
> >> >> > ID: ***@***.***>
> >> >> >
> >> >>
> >> >> —
> >> >> Reply to this email directly, view it on GitHub
> >> >> <#1 (comment)
>,
> >> or
> >> >> unsubscribe
> >> >> <
> >>
>
https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
> >> >
> >> >> .
> >> >> You are receiving this because you authored the thread.Message ID:
> >> >> ***@***.***>
> >> >>
> >> >
> >>
> >> —
> >> Reply to this email directly, view it on GitHub
> >> <#1 (comment)>,
or
> >> unsubscribe
> >> <
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A
> >
> >> .
> >> You are receiving this because you modified the open/close
state.Message
> >> ID: ***@***.***>
> >>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AUYG45XRR2S5DRFIPZEUZZTWD4AARANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANHDIYHRPRH3V7EB35YGW3DWD6AIHANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
I had used them before, but my device is an MSP430F5529. I also tried to
just change the library src, but it doesn't work now.
alvarohqr ***@***.***> 於 2022年10月19日 週三 晚上10:44寫道:
… Try this one:
https://github.com/zakibakar75/arduino-lmic-as923/tree/master/src/lmic
*Alvaro Humberto Quiñonez Rodríguez*
El mar, 18 oct 2022 a las 22:20, stan880219 ***@***.***>)
escribió:
> I'm in Asia, and I also noticed this point. But after I use the library,
it
> contains AS923's frequency. It still doesn't work for me.
>
> alvarohqr ***@***.***> 於 2022年10月19日 週三 凌晨4:11寫道:
>
> > Look this tutorial as reference:
> >
> >
>
https://www.youtube.com/watch?v=wlUs63Q7IMQ&t=670s&ab_channel=ElectronicsInnovation
> > It uses the same library.
> > *Alvaro Humberto Quiñonez Rodríguez*
> >
> >
> > El mar, 18 oct 2022 a las 13:10, Alvaro Qz. Rz. ***@***.***>)
> > escribió:
> >
> > > May I ask what frequency plan are you working on? 868 Mhz in Europe
or
> > > Asia?
> > > *Alvaro Humberto Quiñonez Rodríguez*
> > >
> > >
> > > El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
> > > escribió:
> > >
> > >> I still can not join to LoRaWAN, I has check everywhere. The serial
> > port's
> > >> message is below:
> > >>
> > >> Starting
> > >> Packet queued
> > >> 1144: EV_JOINING
> > >> I also check deviceEUI and APPKEY many times.
> > >> Have you encountered this before? Thanks.
> > >>
> > >> 台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
> > >>
> > >> > Ok, I will try. Thanks.
> > >> >
> > >> > alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
> > >> >
> > >> >> As long as you have those key you should be able to establish the
> > >> >> connection. Also try powering the LoRa device externally
> > >> >> *Alvaro Humberto Quiñonez Rodríguez*
> > >> >>
> > >> >>
> > >> >> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
> > >> >> escribió:
> > >> >>
> > >> >> > Thank for your respond, I will keep find the problem why I
can't
> > >> join in
> > >> >> > LoRaWAN. I had gateway device originally, so it is not the
> problem.
> > >> And
> > >> >> > this project I can only use MSP430 launchpad for energy
> efficiency
> > >> >> target,
> > >> >> > so I can not use this repo:
> > >> >> https://github.com/sandeepmistry/arduino-LoRa.
> > >> >> > Thank you for responding me lots of problems!
> > >> >> >
> > >> >> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> > >> >> >
> > >> >> > > Another option will be switching to this repo:
> > >> >> > > https://github.com/sandeepmistry/arduino-LoRa but you'll
> require
> > >> >> another
> > >> >> > > microcontroller and RFM95W to act as the gateway,
> > >> >> > >
> > >> >> > > —
> > >> >> > > Reply to this email directly, view it on GitHub
> > >> >> > > <
> > #1 (comment)
> > >> >,
> > >> >> or
> > >> >> > > unsubscribe
> > >> >> > > <
> > >> >> >
> > >> >>
> > >>
> >
>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> > >> >> > >
> > >> >> > > .
> > >> >> > > You are receiving this because you authored the
thread.Message
> > ID:
> > >> >> > > ***@***.***>
> > >> >> > >
> > >> >> >
> > >> >> > —
> > >> >> > Reply to this email directly, view it on GitHub
> > >> >> > <
> #1 (comment)
> > >,
> > >> or
> > >> >> > unsubscribe
> > >> >> > <
> > >> >>
> > >>
> >
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
> > >> >> >
> > >> >> > .
> > >> >> > You are receiving this because you modified the open/close
> > >> state.Message
> > >> >> > ID: ***@***.***>
> > >> >> >
> > >> >>
> > >> >> —
> > >> >> Reply to this email directly, view it on GitHub
> > >> >> <
#1 (comment)
> >,
> > >> or
> > >> >> unsubscribe
> > >> >> <
> > >>
> >
>
https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
> > >> >
> > >> >> .
> > >> >> You are receiving this because you authored the thread.Message
ID:
> > >> >> ***@***.***>
> > >> >>
> > >> >
> > >>
> > >> —
> > >> Reply to this email directly, view it on GitHub
> > >> <#1 (comment)
>,
> or
> > >> unsubscribe
> > >> <
> >
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A
> > >
> > >> .
> > >> You are receiving this because you modified the open/close
> state.Message
> > >> ID: ***@***.***>
> > >>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#1 (comment)>,
or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/AUYG45XRR2S5DRFIPZEUZZTWD4AARANCNFSM6AAAAAAQ5G2F4A
> >
> > .
> > You are receiving this because you authored the thread.Message ID:
> > ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/ANHDIYHRPRH3V7EB35YGW3DWD6AIHANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you modified the open/close state.Message
> ID: ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/AUYG45VS4DEGAORJZ2ZZBSDWEACNJANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
I'm afraid I cannot help you with your problem. Sorry.
*Alvaro Humberto Quiñonez Rodríguez*
El mié, 19 oct 2022 a las 20:33, stan880219 ***@***.***>)
escribió:
… I had used them before, but my device is an MSP430F5529. I also tried to
just change the library src, but it doesn't work now.
alvarohqr ***@***.***> 於 2022年10月19日 週三 晚上10:44寫道:
> Try this one:
> https://github.com/zakibakar75/arduino-lmic-as923/tree/master/src/lmic
>
> *Alvaro Humberto Quiñonez Rodríguez*
>
>
> El mar, 18 oct 2022 a las 22:20, stan880219 ***@***.***>)
> escribió:
>
> > I'm in Asia, and I also noticed this point. But after I use the
library,
> it
> > contains AS923's frequency. It still doesn't work for me.
> >
> > alvarohqr ***@***.***> 於 2022年10月19日 週三 凌晨4:11寫道:
> >
> > > Look this tutorial as reference:
> > >
> > >
> >
>
https://www.youtube.com/watch?v=wlUs63Q7IMQ&t=670s&ab_channel=ElectronicsInnovation
> > > It uses the same library.
> > > *Alvaro Humberto Quiñonez Rodríguez*
> > >
> > >
> > > El mar, 18 oct 2022 a las 13:10, Alvaro Qz. Rz. ***@***.***>)
> > > escribió:
> > >
> > > > May I ask what frequency plan are you working on? 868 Mhz in Europe
> or
> > > > Asia?
> > > > *Alvaro Humberto Quiñonez Rodríguez*
> > > >
> > > >
> > > > El mar, 18 oct 2022 a las 2:08, stan880219 ***@***.***>)
> > > > escribió:
> > > >
> > > >> I still can not join to LoRaWAN, I has check everywhere. The
serial
> > > port's
> > > >> message is below:
> > > >>
> > > >> Starting
> > > >> Packet queued
> > > >> 1144: EV_JOINING
> > > >> I also check deviceEUI and APPKEY many times.
> > > >> Have you encountered this before? Thanks.
> > > >>
> > > >> 台師大張劭群 ***@***.***> 於 2022年10月12日 週三 下午2:30寫道:
> > > >>
> > > >> > Ok, I will try. Thanks.
> > > >> >
> > > >> > alvarohqr ***@***.***> 於 2022年10月12日 週三 上午9:03寫道:
> > > >> >
> > > >> >> As long as you have those key you should be able to establish
the
> > > >> >> connection. Also try powering the LoRa device externally
> > > >> >> *Alvaro Humberto Quiñonez Rodríguez*
> > > >> >>
> > > >> >>
> > > >> >> El mar, 11 oct 2022 a las 1:58, stan880219 ***@***.***>)
> > > >> >> escribió:
> > > >> >>
> > > >> >> > Thank for your respond, I will keep find the problem why I
> can't
> > > >> join in
> > > >> >> > LoRaWAN. I had gateway device originally, so it is not the
> > problem.
> > > >> And
> > > >> >> > this project I can only use MSP430 launchpad for energy
> > efficiency
> > > >> >> target,
> > > >> >> > so I can not use this repo:
> > > >> >> https://github.com/sandeepmistry/arduino-LoRa.
> > > >> >> > Thank you for responding me lots of problems!
> > > >> >> >
> > > >> >> > alvarohqr ***@***.***> 於 2022年10月7日 週五 下午1:44寫道:
> > > >> >> >
> > > >> >> > > Another option will be switching to this repo:
> > > >> >> > > https://github.com/sandeepmistry/arduino-LoRa but you'll
> > require
> > > >> >> another
> > > >> >> > > microcontroller and RFM95W to act as the gateway,
> > > >> >> > >
> > > >> >> > > —
> > > >> >> > > Reply to this email directly, view it on GitHub
> > > >> >> > > <
> > > #1 (comment)
> > > >> >,
> > > >> >> or
> > > >> >> > > unsubscribe
> > > >> >> > > <
> > > >> >> >
> > > >> >>
> > > >>
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AUYG45VZ4LXIZ2IW54P3YI3WB62CDANCNFSM6AAAAAAQ5G2F4A
> > > >> >> > >
> > > >> >> > > .
> > > >> >> > > You are receiving this because you authored the
> thread.Message
> > > ID:
> > > >> >> > > ***@***.***>
> > > >> >> > >
> > > >> >> >
> > > >> >> > —
> > > >> >> > Reply to this email directly, view it on GitHub
> > > >> >> > <
> > #1 (comment)
> > > >,
> > > >> or
> > > >> >> > unsubscribe
> > > >> >> > <
> > > >> >>
> > > >>
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFL5GCYOE5F6YOIYFLWCUT5BANCNFSM6AAAAAAQ5G2F4A
> > > >> >> >
> > > >> >> > .
> > > >> >> > You are receiving this because you modified the open/close
> > > >> state.Message
> > > >> >> > ID: ***@***.***>
> > > >> >> >
> > > >> >>
> > > >> >> —
> > > >> >> Reply to this email directly, view it on GitHub
> > > >> >> <
> #1 (comment)
> > >,
> > > >> or
> > > >> >> unsubscribe
> > > >> >> <
> > > >>
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/AUYG45V4Q23F6XGDS7S6QOLWCYE5XANCNFSM6AAAAAAQ5G2F4A
> > > >> >
> > > >> >> .
> > > >> >> You are receiving this because you authored the thread.Message
> ID:
> > > >> >> ***@***.***>
> > > >> >>
> > > >> >
> > > >>
> > > >> —
> > > >> Reply to this email directly, view it on GitHub
> > > >> <
#1 (comment)
> >,
> > or
> > > >> unsubscribe
> > > >> <
> > >
> >
>
https://github.com/notifications/unsubscribe-auth/ANHDIYFVFBD2BRQULANMKG3WDZSKTANCNFSM6AAAAAAQ5G2F4A
> > > >
> > > >> .
> > > >> You are receiving this because you modified the open/close
> > state.Message
> > > >> ID: ***@***.***>
> > > >>
> > > >
> > >
> > > —
> > > Reply to this email directly, view it on GitHub
> > > <#1 (comment)>,
> or
> > > unsubscribe
> > > <
> >
>
https://github.com/notifications/unsubscribe-auth/AUYG45XRR2S5DRFIPZEUZZTWD4AARANCNFSM6AAAAAAQ5G2F4A
> > >
> > > .
> > > You are receiving this because you authored the thread.Message ID:
> > > ***@***.***>
> > >
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <#1 (comment)>,
or
> > unsubscribe
> > <
>
https://github.com/notifications/unsubscribe-auth/ANHDIYHRPRH3V7EB35YGW3DWD6AIHANCNFSM6AAAAAAQ5G2F4A
> >
> > .
> > You are receiving this because you modified the open/close
state.Message
> > ID: ***@***.***>
> >
>
> —
> Reply to this email directly, view it on GitHub
> <#1 (comment)>, or
> unsubscribe
> <
https://github.com/notifications/unsubscribe-auth/AUYG45VS4DEGAORJZ2ZZBSDWEACNJANCNFSM6AAAAAAQ5G2F4A
>
> .
> You are receiving this because you authored the thread.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub
<#1 (comment)>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ANHDIYHL6NSBUQ7EETSFGJTWEC4Q7ANCNFSM6AAAAAAQ5G2F4A>
.
You are receiving this because you modified the open/close state.Message
ID: ***@***.***>
|
Hi, I want to working this project to join LoRaWAN with MSP430F5529 and rfm95, but energia can not work for me. Could you offer a user guide for me to use you project on my device. Thanks.
The text was updated successfully, but these errors were encountered: