We just installed Vivado. Now we’re going to run it for the first time.
Open a terminal and source this file source /opt/Xilinx/Vivado/2015.1/settings64.sh. Add it to your ~/.bashrc file so it’s run each time you launch a terminal.
Make a directory for projects and launch vivado. The whole sequence is below.
source /opt/Xilinx/Vivado/2015.1/settings64.sh
mkdir ~/vivado
cd ~/vivado
vivado &
Unfortunately, I had some errors at first start-up. The following commands helped.
sudo chmod 777 -R /opt/Xilinx/
sudo chmod 777 -R ~/.Xilinx/
Try again.
vivado &
Vivado starts up and we’re ready to program!
Add -o Acquire::ForceIPv4=true when running apt-get.
If you want to make the setting persistent just create /etc/apt/apt.conf.d/99force-ipv4 and put Acquire::ForceIPv4 "true"; in it:
echo 'Acquire::ForceIPv4 "true";' | sudo tee /etc/apt/apt.conf.d/99force-ipv4
Config options Acquire::ForceIPv4 and Acquire::ForceIPv6 were added to version 0.9.7.9~exp1 (see bug 611891) which is available since Ubuntu Saucy (released in October 2013) and Debian Jessie (released in April 2015).
A better solution is to install the driver using DKMS. This way you won't need to re-install it after kernel uprades. Do it this way:
sudo apt-get install git dkms build-essential
git clone https://github.com/neurobin/MT7630E.git
cd MT7630E/
sudo make dkms
change
git add .
git commit -m "message"
git push origin branch