ENA driver is supported on kernels 3.10 and above.
The driver was verified on the following distributions:
RedHat:
- RedHat Enterprise Linux 7.0 or newer
Ubuntu:
- Ubuntu Trusty 14.04 amd64 server
- Ubuntu Xenial 16.04 amd64 server
- Ubuntu Yakkety 16.10 amd64 server
- Ubuntu Zesty 17.04 amd64 server
- Ubuntu Bionic Beaver 18.04 server or newer
Amazon Linux:
- Amazon Linux AMI 2016.09.1
- Amazon Linux AMI 2017.03
- Amazon Linux AMI 2017.09
- Amazon Linux AMI 2018.03
- Amazon Linux AMI 2
- Amazon Linux AMI 2023
CentOS:
- CentOS 7.0 or newer
SUSE:
- SUSE Linux Enterprise Server 12 SP2 or newer
- SUSE Linux Enterprise Server 15 or newer
New Features
- Add support for device reset request over AENQ
- Add NUMA aware interrupt allocation
Bug fixes
- Remove xdp drops from total rx drops in ena_get_stats64()
- Fix Makefile detection for header files changes
- Fix possible stuck tx packets when last tx packet is dropped in a burst
- Verify number of descriptors for copybreak
- Fix flush XDP packets on error
Minor Changes
- Add more info for tx timeout
- Document large LLQ enablement by default
- Featurize AF_XDP code
- RX ring submission queue optimization
- Remove redundant ena_select_queue handler
- Handle ENA_CMD_ABORTED case on admin queue interrupt mode
- Split reset reasons for missing keep alive notification
- Document best practices info for rx_overruns
- Add support for XDP in RHEL 8.5 and above
Bug fixes
- Free PHC info before netdev private info (adapter) is freed
New Features
- Support max wide LLQ depth from device
Bug fixes
- Count all currently missing TX completions in check
- Fix compilation issues in Oracle Linux 8 and 9
- ECC random number generation
- Fix compilation issues in Red Hat 9.3
Minor Changes
- Add reset reason for missing admin interrupt
- Fix rpm installation for RHEL 8.x and 9.x
Notes
- Devlink support has been removed from the driver. Please consult the documentation on the different methods available for enabling Large LLQ.
- Build system has been updated with the introduction of ECC (ENA Compatibility Check). The build command remained as is.
New Features
- ECC (ENA Compatibility Check) build system update
- Add TX/RX descriptor corruption check
- Activate PHC on supported devices and retrieve PHC timestamp and error bound values.
- Remove devlink support
- Allow modifying large LLQ entry with sysfs
Bug fixes
- Fix DMA syncing in XDP path when SWIOTLB is on
- Delete double counting in ena_tx_map_skb error flow
- Remove wrong napi id assignment in AF_XDP
- Initialize llq_policy field for all cases
- Fix skb truesize in case the RX buffer is not reused
- Correct the Makefile dependency list
- Fix crash when interrupt arrives after admin command timeout
- Fix large LLQ in ethtool when devlink is disabled
Minor Changes
- Add skb submission print time when freeing TX buffers
- Add TX IPv6 checksum offload support indication
- Improve reset reason statistics
- Add Large LLQ enablement documentation
Bug fixes
- Fix compilation issues on kernels >= 6.3
New Features
- Advertise TX push support on ethtool
- Sub-optimal configuration notification support
- Add ethtool support for modifying large LLQ
- Support LLQ entry size recommendation from device
Bug fixes
- Fix out of bound recorded RX queue
- Fix incorrect descriptor free behavior in XDP
- Fix incorrect range check when setting an XSK pool
- Fix different measurement units in comparison
- Fix wrong missing IO completions check order
- Missing TX completions mechanism rework
Minor Changes
- Update kernel version and distributions support
- Allow custom kernel header path for driver compilation
- Improve XDP_TX throughput by using batching
- Update dkms documentation
- Add msecs since last interrupt info for debug
Bug fixes
- Fix compilation issues in SLES 15 SP5
- Fix compilation issues in Fedora 37 and 38
- Fix compilation issues in kernel 5.4 and 5.10 backports
New Features
- Report RX overrun errors via net device stats
Bug fixes
- Fix compilation issue on ubuntu 16.04 instances
Bug fixes
- Add support for Kernels 6.2-6.3 (Devlink and PTP changes)
- Fix compilation issues in RHEL 8.8
Bug fixes
- Fix incorrect dma sync when SWIOTLB is on
- Fix compilation issues in RHEL 9.2
Minor Changes
- Compilation fixes for SLES 15SP3
Bug fixes
- Revert napi_consume_skb() and napi_build_skb() usage
New Features
- PHC module param enablement
- PHC devlink param enablement
- Add hint for interrupt moderation for the device
- Change initial static RX interrupt moderation interval
- Enable DIM by default on all CPU Architectures
Bug Fixes
- DMA sync for CPU before accessing buffer
- Fix ena_probe destroy order
- Validate completion descriptors consistency
- Fix TX packets missing completion counter
Minor Changes
- Compilation fixes for RHEL 9.0, 9.1 and SLES 15SP4
- PHC info dynamic allocation
- Publish devlink reload for RHEL 9.0 and 9.1
- Add ENA Express documentation
Buf Fixes
- Fix devlink large LLQ config not fully applied
New Features
- Add extended metrics mechanism support
- Add conntrack customer metric to ethtool
Bug Fixes
- Fix compilation issues on SLES 15 SP4
- Fix compilation errors in RHEL 8.7, 9.0
- Configure TX rings mem policy in reset flow
Minor Changes
- Add napi_build_skb support
- Add napi_consume_skb
- Align ena_alloc_map_page signature
- Move from strlcpy with unused retval to strscpy
- Add status check for strscpy calls
- Backport napi_alloc_skb usage
Notes
- The driver is now dependent on the ptp module for loading See README for more details.
New Features
- Add support for PTP HW clock
- Add support for SRD metrics Feature's enablement and documentation would be in future release
Bug Fixes
- Fix potential sign extension issue
- Reduce memory footprint of some structs
- Fix updating rx_copybreak issue
- Fix xdp drops handling due to multibuf packets
- Handle ena_calc_io_queue_size() possible errors
- Destroy correct amount of xdp queues upon failure
Minor Changes
- Remove wide LLQ comment on supported versions
- Backport uapi/bpf.h inclusion
- Add a counter for driver's reset failures
- Take xdp packets stats into account in ena_get_stats64()
- Make queue stats code cleaner by removing if block
- Remove redundant empty line
- Remove confusing comment
- Remove flag reading code duplication
- Replace ENA local ENA_NAPI_BUDGET to global NAPI_POLL_WEIGHT
- Change default print level for netif_ prints
- Relocate skb_tx_timestamp() to improve time stamping accuracy
- Backport bpf_warn_invalid_xdp_action() change
- Fix incorrect indentation using spaces
- Driver now compiles with Linux kernel 5.19
Bug Fixes
- Fix remaining space check in DRB
Changes
- Make AF XDP native support experimental
- Update supported distributions documentation
Bug Fixes
- Fix compilation for SLES 15 SP3
- Fix compilation for RHEL 8.6
- Fix wrong value check in copybreak sysfs code
Minor Changes
- Provide more information on TX timeouts
- Use the same interrupt moderation value for both TX and RX In XDP TX/REDIRECT channels
Bug Fixes
- Fix NUMA node update rate
New Features
- Add AF XDP with zero-copy support
- Add devlink tool support
- Add Dynamic RX Buffers (DRB) feature
Bug Fixes
- Fix Toepltiz initial value change after changing RSS key
- Fix compilation errors on RHEL 8 and on some old kernel version
- Fix several bugs in XDP infrastructure
Minor Changes
- Cosmetic code changes
- Add support for (upcoming) kernel 5.17
- Removing some dead code and redundant checks
New Features
- Add BQL support enabled by module parameter
Minor Changes
- Don't print stats on refresh capabilities reset
New Features
- Add "capabilities" field to negotiate device capabilities
- Add support for kernel 5.14
- Allow the device to signal the driver if features renogotiation is required
Bug Fixes
- Fix XDP packet fowarding on 6th generaion instances
- Prevent device reset when device isn't responsive
Minor Changes
- Move Local Page Cache (LPC) code to a separate file
- Reset device when receiving wrong request id on RX
- Cosmetic changes and code restructuring
- Fix typo in README
- Remove redundant code
New Features
- Unify skb allocation path and use build_skb()
- Support ethtool priv-flags and LPC state change
Bug Fixes
- Fix mapping function issues in XDP
- Fix XDP redirection related failures
- Fix page_ref_count() related checks to support older kernels correctly.
- Don't define UBUNTU_VERSION_CODE when not in Ubuntu.
- Drop unnecessary "#ifdef <function_name>" checks from kcompat.h.
- Bug fixes and code improvements in legacy poll code
Minor Changes
- Add debug prints to failed commands
- Minor performance improvements
- Replace pci_set_dma_mask/_coherent with dma_set_mask_and_coherent
- Change ena_increase_stat_atomic() function name
- Change variable casting in ena_com.c
- Add explicit include of ethtool.h to linux/ethtool.c
- Change LLQ fallback print from error to warning
- Remove unused ENA_DEFAULT_MIN_RX_BUFF_ALLOC_SIZE define
- Remove unused SUSPEND/RESUME defines
- Add mac OS defines.
- Use WRITE/READ_ONCE macros for first_interrupt variable
- Propagate upstream support for AF XDP busypoll
- Add Jiffies of last napi call to stats
- Add ena_ring_tx_doorbell() function
- Cosmetic changes to LPC
- Add is_lpc_page indication to help with page mapping
- Back-propagate xdp helpers from upstream kernel
- Fix RST format in README file
Bug Fixes
- Fix compilation error in kernels >= 5.10
Minor Changes
- Make all module parameters readable
New Features
- Implement local page cache (LPC) system (see README.rst for details)
Bug Fixes
- Rename README to README.rst for rpm generation
New Features
- Introduce XDP redirect implementation
- Add support for new power management API for kernels >= 5.8
- Provide interface and device information in logging messages
** Bug Fixes **
- Performance: set initial DMA width to avoid intel iommu issue.
- Fixed wrong expression in WARN_ON macro.
- Fix Sparse static checker errors in xdp code.
- Move napi declaration inside the loop to avoid Sparse static check warning.
- Don't init DIM work (dim.work) in case queue creation fails
- Make missed_tx stat incremental instead of reassigning it.
- Fix packet's addresses where rx_offset wasn't taken into account.
- Validate req_id in ena_com_rx_pkt().
- Make sure timer and reset routine won't be called after freeing device resources.
- Fix compilation error in RHEL 8.3
Minor Changes
- Initialize net_device earlier to allow its usage in netif_* and netdev_* prints. For more details see [https://www.spinics.net/lists/netdev/msg683250.html]
- Add function to increase stats to reduce code duplication.
- Ethtool: convert stat_offset to 8 bytes resolution to remove complex casts in the code.
- XDP: queue count check: Fix coding style nits.
- Cosmetic changes that fix alignment issues.
- Change ena license SPDX comment style in headers.
- Remove code duplication related to interrupt unmask stat.
- Fix spelling mistake in XDP stat query code.
- Move XDP_QUERY handling to the kernel for kernels >= 5.8.
- Conversion of README from markdown to rst format.
New Features
- Add stats printing to XDP queues
- Add queue counters for xdp actions (number of XDP_PASS/XDP_TX etc.)
- Add support for kernel v5.8
- Add interrupts unmask statistics to xdp queues
- Allow configuring RSS function and key
** Bug Fixes **
- Drop incorrect and irrelevant llq - device id mappings.
- Avoid remapping the llq mem bar every reset
- Prevent reset after device destruction
- Make DMA un-mapping BIDIRECTIONAL to RX pages to match their mapping. This is needed for Traffic Mirroring feature.
Minor Changes
- Change license string to SPDX format
- Fix some spelling mistakes
- Change variables and macros names to something more informative
- Add masking and null checking in code that requires it
- Align all log message from driver to have the driver's name at the beginning
- Remove code duplications
- Removed unnecessary LLQ acceleration mode negotiation
- Switch to using regular bool values instead atomics for unmask_interrupt (whose name was changed to masked_interrupts).
New Features
- Add new device statistics to ethtool command
Bug Fixes
- Fix memory leak in XDP_TX when TX queue is full.
- Fix napi budget accounting of XDP packets.
- Fix driver loading error in kernels >= 5.7 due to unreported interrupt coalescing capabilities.
- Fix is_doorbell_needed() to account for meta descriptors properly.
New Features
- Re-enable RX offset feature.
Bug Fixes
- Fix XDP PASS issue due to incorrect handling of offset in rx_info.
- Add PCI shutdown handler to allow safe kexec.
- Fix RHEL 8.2 compilation error.
- Fix kernel 5.5 compilation error.
Minor Changes
- Reduce driver load time.
Minor Changes
- Expose additional PCI device ID
Bug Fixes
- Disable rx offset feature
New Features
- Enable dynamic interrupt moderation on ARM64
Bug Fixes
- Use random key to configure RSS instead of static one.
- Fix multiple issues with the RSS configuration.
- Restore accidentally deleted meta-descriptor-caching-related code.
Minor Changes
- Set default tx interrupt moderation interval to 64, aligning it to upstream.
- Align comments surrounding create_queues_with_size_backoff() to upstream code.
- Minor cosmetic changes.
- Remove redundant print from ena_init().
- Change DRV_MODULE_VERSION to DRV_MODULE_GENERATION as in upstream code.
- Remove redefinition of ENA_HASH_KEY_SIZE in ena_netdev.h.
- Add missing row to README.
- Remove unused variable in XDP code.
- Use HAVE_NETDEV_XMIT_MORE in kcompat.h.
Bug Fixes
- Revert VXLAN TX checksum offloading support due to issues with other tunnel types.
- Avoid unnecessary constant rearming of interrupt vector when busy-polling.
Bug Fixes
- Fix compilation error in SLES 12 SP5
Bug Fixes
- fix incorrect parameter to ena_indirection_table_get() in kernels in range [3.8, 3.16)
New Features
- Implement XDP support for DROP and TX actions.
- Add VXLAN TX checksum offloading support.
- Map rx buffers bidirectionally to support traffic mirroring.
- Introduce disable meta descriptor caching feature required by llq accelerated mode.
- Revert extra_properties feature implementation via ethtool priv-flags.
- Support set_channels() callback in ethtool.
Bug Fixes
- Fix multiple issues with the RSS feature.
- Fix uses of round_jiffies() in timer_service.
- Add missing ethtool TX timestamping indication.
- Fix ENA_REGS_RESET_DRIVER_INVALID_STATE error during hibernation.
- Fix race condition causing an incorrect wake up of a TX queue when it is down.
- Fix dim exported symbols conflicts by removing all EXPORT_SYMBOL directives from dim files.
- Fix first interrupt accounting in XDP by adding first_interrupt field to napi struct.
- Fix napi handler misbehavior when the napi budget is zero.
- Add max value check in ena_set_channels() to disalow setting the number of queues to a higher than allowed maximum number.
- Fix race condition when setting the number of queues immediately after loading the driver, which caused a crash when changing the number of queues to a larger number than currently set.
- Fix incorrect setting of number of msix vectors according to num_io_queues, causing crash when changing the number of queues to a larger number after driver reset.
- Fix ena_tx_timeout() signature for kernels >= 5.5
Minor Changes
- Add RX drops and TX drops counters to ethtool -S command.
- Aggregate accelerated mode features under struct ena_admin_accel_mode_req currently including the new disable meta descriptor caching feature and the existing max tx burst size feature.
- Add debug prints to failed commands.
- Make ena rxfh support ETH_RSS_HASH_NO_CHANGE.
- Change MTU parameter to be unsigned in ena_com_set_dev_mtu().
- Remove unused ena_restore_ethtool_params() and relevant fields.
- Use combined channels instead of separate RX/TX channels in ethtool -l/L.
- Use SHUTDOWN as reset reason when closing interface.
- Change RSS default function on probe to Toeplitz.
- Enable setting the RSS hash function only without changing the key in ethtool.
- Remove superfulous print of number of queues during ena_up().
- Remove unnecessary parentheses to pass checkpatch.
- Add unmask interrupts statistics to ethtool.
- Arrange local variables in ena_com_fill_hash_function() in reverse christmas tree order.
- Separate RSS hash function retrieval and RSS key retreival into 2 different functions.
New Features
- Add support for the RX offset feature - where the device writes data with an offset from the beginning of an RX buffer.
New Features
- Replace old adaptive interrupt moderation algorithm with the DIM algorithm.
- Introduce driver_supported_features field in host_info, and use it to signal to the device that the driver supports adaptive interrupt moderation.
Bug Fixes
- Prevent NULL pointer dereference when an admin command is executed during the execution of ena_remove().
- Fix compilation error in early SUSE versions due to missing suse_version.h file.
- Fix continuous keep-alive resets.
- Avoid potential memory access violation by validating Rx descriptor req_id in the proper place.
- Fix issue where llq header size set by force_large_llq_header module parameter did not survive a device reset, causing a driver-device mismatch of header size.
New Features
- Add module parameter for setting the number of I/O queues.
Bug Fixes
- Add aarch64 to ExclusiveArch directive in ena.spec to allow building the driver using rpm-build on arm instances.
- Make ethtool -l show correct max number of queues (ethtool -L not implemented yet, but number of queues can be changed via the new num_io_queues module parameter).
- Fix compilation for both opensuse and suse 15.1
Minor Changes
- Remove redundant print of number of queues and placement policy in ena_probe().
- Make all types of variables that convey the number and sizeof queues to be u32, for consistency.
- Move the print to dmesg of creating io queues from ena_probe to ena_up.
- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity and consistency.
- Remove redundant number of io queues parameter in functions ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts()
- Use the local variable ena_dev instead of ctx->ena_dev in ena_calc_io_queue_size().
- Fix multi row comment alignment.
- Change num_queues to num_io_queues for clarity and consistency
Bug Fixes
- kcompat: fix ndo_select_queue() signature for newer kernels
- kcompat: use netdev_xmit_more() instead of skb->xmit_more()
- Drop mmiowb() from newer kernels as done in upstream in the following comit: torvalds/linux@fb24ea5
- Fix compilation on RHEL 8
- ena_netdev.c: ena_update_queue_sizes: fix race condition with reset
Minor Changes
- Fix the kernel version indication comment in README
- Make sure all the counters that will be updated in normal case are grouped together so we don't end up wasting cache lines. cnt+bytes+csum_good+rx_copybreak_pkt should be grouped together as they will be used most of the time.
- Drop superflous error message from get_private_flags_strings(), the motive behind this is here: https://marc.info/?l=linux-netdev&m=155957215813380&w=2
- Use strlcpy instead of snprintf in get_private_flags_strings()
- Changed ena_update_queue_sizes() signature to use u32 instead of int type for the size arguments
- Drop inline keyword all *.c files, let the compiler decide
- Add auto_polling status print to command completion print in ena_com_wait_and_process_admin_cq_interrupts()
- Add unlikely() hints to conditionals where it is needed
- ena_com is generic while ethtool is Linux specific therefore we remove the reference to ethtool from ena_com
- Add sanity check test back to ena_com_config_dev_mode(). In the sanity check use == instead of <= since tx_max_header_size is uint32 and cannot be negative
- Fix reverse christmas tree in ena_com_write_sq_doorbell()
New Features
- Add force_large_llq_header module parameter to enable support for packets with headers larger than 96 bytes in LLQ mode
- Add support for Tx/Rx rings size modification through ethtool
- Allow rings allocation backoff when low on memory
Bug Fixes
- Fix race between link up and device initalization
- Free napi resources when ena_up() fails
- Make ethtool show correct current and max ring sizes
- Set freed objects to NULL to avoid failing future allocations
- kcompat: fix compilation warning in SLES 12 regarding ena_get_stats64()
- Fix error during MTU update in SLES 12 SP3
- Fix swapped parameters when calling ena_com_indirect_table_fill_entry
- Fix return value of ena_com_config_llq_info()
Minor Changes
- Add good checksum counter for to ethtool statistics
- Add rx_queue_size parameter documentation to README
- Arrange ena_probe() function variables in reverse christmas tree
- Replace free_tx/rx_ids union with single free_ids field in ena_ring
- Remove unnecessary calculations in ena_com_update_dev_comp_head() when CQ doorbell doesn't exist (the common path)
- Add new line to end of prints
Bug Fixes
- Fix compilation on Linux 5.0 due to the removal of dma_zalloc_coherent()
- gcc 8: fix compilation warning due to the introduction of Wstringop-truncation
- Fix compilation on RHEL 8
New Features
- Low Latency Queues (LLQs) - a new placement policy that enables storing Tx descriptor rings and packet headers in the device memory. LLQs improve average and tail latencies. As part of LLQs enablement new admin capability was defined, device memory was mapped as write-combined and the transmit processing flow was updated.
- Support for Rx checksum offload.
- Increase RX copybreak from 128 to 256 to improve memory and receive socket buffer utilization.
- Add support for maximum TX burst size.
Bug Fixes
- Fix NULL dereference due to untimely napi initialization.
- Fix rare bug when failed restart/resume is followed by driver removal, and causes memory corruption.
- Fix illegal access to previously unregistered netdev in ena_remove().
- Fix warning in rmmod caused by double iounmap.
- Fix compilation error in distributions that merged __GFP_COLD removal to kernels earlier than 4.15.
Minor Changes
- Remove support for ndo_netpoll_controller.
- Update host info structure to match the latest ENA spec.
- Remove redundant parameter in ena_com_admin_init().
- Fix indentations in ena_defs for better readability.
- Add section about predictable Network Names to the README.
- Fix small spelling mistake in RELEASE_NOTES __FGP_COLD => __GFP_COLD.
Bug Fixes
- fix driver compilation error in Ubuntu 14.04 kernel 3.13.0-29
- fix non-functional kernel panic on pcie hot-plug removal on EC2 bare metal instances
- fix compatibility issues with non-x86 platforms using PAGE_SIZE larger than 4K
- add memory barriers for non-x86 platforms with different memory ordering rules.
New Features
- Support different queue size for Rx and Tx. A new module param to configure that.
- Optimize performance for MMIO writes to pcie - use relaxed writes when possible.
Bug Fixes
- fix driver compilation errors for RHEL 7.5.
Bug Fixes
- fix driver compilation errors for Oracle Linux UEK3 with kernel 3.8.13.
Bug Fixes
- fix driver compilation errors for centos 6.6 and 7.0.
- remove __GFP_COLD from Rx page allocation - __GFP_COLD was removed from kernel 4.15. For more information please refer to: https://patchwork.kernel.org/patch/10001293/
- move to the new kernel timers API - The Linux timer API was changed. use the new API. For more information about the improved kernel timers API: https://lwn.net/Articles/735887/
- reorder IO interrupt handler - To avoid a very rare race condition, set the interrupt indication to true before calling napi_schedule_irqoff(). It is known that we are inside the interrupt routine, but the code could be moved outside of the interrupt routine in the future, so better have these set before scheduling napi.
- add missing memory barrier after setting the device reset reason and before setting the trigger reset flag.
Minor Changes
- remove redundant call to unlikely().
- fix indentation in several places.
New Features:
- improve driver robustness - add mechanism for detection and recovery from lost/misrouted interrupt.
Bug Fixes:
- don't enable interrupts until ENA_FLAG_DEV_UP flag is set - this might potentially cause a race resulting in ignored interrupts.
- add error handling to ena_down() sequence - errors, if not handled correctly, might affect subsequent ena_open() procedure.
New Features:
- refactor check_missing_com_in_queue() - improve readability.
Bug Fixes:
- fix driver statistics overflow - ena_get_stats() used wrong variable size which lead to an overflow.
- fix driver compilation under Ubuntu and RHEL.
- fix misplace call to netif_carrier_off() during probe
- fix a rare condition between device reset and link up setup - In rare cashes, ena driver would reset and restart the device. When the driver reset the device a link-up event might arrive before the driver completes the initialization, which lead to a access to unallocated memory.
New Features:
- add support for driver hibernation -add PM callbacks to support suspend/resume.
- improve driver boot time: Reduce sleeps when driver is working in polling mode.
- add statistics for missing tx packets.
Bug Fixes:
- fix kernel panic when register memory bar map fails.
- driver used to report wrong value for max Tx/Rx queues (always reported 128 queues)
- fix compilation errors for RedHat 7.4
- fix ethtool statistics counters overflow for kernels below 3.2.36
New Features:
- add support for receive path filling the previously submitted free buffer in out of order.
- update enable PCI to use newly introduced IRQ functions in linux.
- refactor check_for_missing_tx_completions to reduce the code length of this function.
- remove redundant call for napi_hash_add() in kernels later than version 4.5.
- add reset reason for each device FLR.
Bug Fixes:
- fix compilation error in kernel 4.11
- fix uncompleted polling admin command false alarm.
- fix theoretical case - the drive might hang after consecutive open/close interface.
- fix super rare race condition between submit and complete admin commands. "Completion context is occupied" error message will appear when this bug is reproduce.
- unmap the device bars on driver removal
- fix memory leak in ena_enable_msix()
- fix napi_complete_done() wrong return value
- fix race in polling mode in kernels 4.5 - 4.9. When CONFIG_RX_BUSY_POLL is set and busy poll is enabled, there is a potential case where the napi handler will not unmask the MSI-X interrupt leading to a case where the interrupt is left unmask and nobody schedule napi.
- disable admin queue msix while working in polling mode
- fix theoretical bug - on systems with extremely low memory, the napi handler might run out ram and failed to allocate new pages for Rx buffers. If the queue was empty when the scenario occur and napi completed his task nobody will reschedule napi and refill the Rx queue.
- Add support for RHEL 6.7/6.8 and 7.3
New Features:
- Add ndo busy poll callback, that will typically reduce network latency.
- Use napi_schedule_irqoff when possible
- move from ena_trc_ to pr_.. functions and ENA_ASSERT to WARN
- Indentations and fix comments structure
- Add prefetch to the driver
- Add hardware hints
- Remove affinity hints in the driver, allowing the irq balancer to move it depending on the load. Developers can still override affinity using /proc/irq/*/smp_affinity
Bug Fixes:
- Initialized last_keep_alive_jiffies Can cause watchdog reset if the value isn't initialized After this watchdog driver reset it initiated, it will not happen again while the OS is running.
- Reorder the initialization of the workqueues and the timer service In the highly unlikely event of driver failing on probe the reset workqueue cause access to freed area.
- Remove redundant logic in napi callback for busy poll mode. Impact the performance on kernel >= 4.5 when CONFIG_NET_RX_BUSY_POLL is enable and socket is opened with SO_BUSY_POLL
- In RSS hash configuration add missing variable initialization.
- Fix type mismatch in structs initialization
- Fix kernel starvation when get_statistics is called from atomic context
- Fix potential memory corruption during reset and restart flow.
- Fix kernel panic when driver reset fail
Minor changes:
- Reduce the number of printouts
- Move printing of unsupported negotiated feature to _dbg instead of _notice
- Increase default admin timeout to 3 sec and Keep-Alive to 5 sec.
- Change the behaiver of Tx xmit in case of an error. drop the packet and return NETDEV_TX_OK instead of retunring NETDEV_TX_BUSY
New Features:
- Reduce the number of parameters and use context for ena_get_dev_stats
- Don't initialize variables if the driver don't use their value.
- Use get_link_ksettings instead get_settings (for kernels > 4.6)
Bug Fixes:
- Move printing of unsupported negotiated feature to _dbg instead of _notice
- Fix ethtool RSS flow configuration
- Add missing break in ena_get_rxfh
Minor changes:
- Remove ena_nway_reset since it only return -ENODEV
- rename small_copy_len tunable to rx_copybreak to match with main linux tree commit
Initial commit
ENA Driver supports Linux kernel version 3.2 and higher.
The driver was tested with x86_64 HVM AMIs.