maguro: add support for BT firmware loading.

From 'adb shell': # cat /sys/class/rfkill/rfkill0/type bluetooth # echo 1 > /sys/class/rfkill/rfkill0/state # setprop ctl.start hciattach Observe 'adb logcat' for success.
andreasgal · Jan 10, 2012 · f700a72 · f700a72
1 parent f846bf0
commit f700a72
Show file tree

Hide file tree

Showing 7 changed files with 706 additions and 17 deletions.
diff --git a/glue/gonk/device/toro/maguro/AndroidBoard.mk b/glue/gonk/device/toro/maguro/AndroidBoard.mk
@@ -3,19 +3,18 @@ LOCAL_PATH := $(call my-dir)
 
 # files that live under /system/etc/...
 
-#copy_from :=
-#
-#
-#copy_to := $(addprefix $(TARGET_OUT)/,$(copy_from))
-#copy_from := $(addprefix $(LOCAL_PATH)/,$(copy_from))
-#
-#$(copy_to) : PRIVATE_MODULE := system_etcdir
-#$(copy_to) : $(TARGET_OUT)/% : $(LOCAL_PATH)/% | $(ACP)
-#	$(transform-prebuilt-to-target)
-#
-#ALL_PREBUILT += $(copy_to)
+copy_from := \
+   etc/init.qcom.bt.sh \
+   etc/init.qcom.post_boot.sh \
 
+copy_to := $(addprefix $(TARGET_OUT)/,$(copy_from))
+copy_from := $(addprefix $(LOCAL_PATH)/,$(copy_from))
 
+$(copy_to) : PRIVATE_MODULE := system_etcdir
+$(copy_to) : $(TARGET_OUT)/% : $(LOCAL_PATH)/% | $(ACP)
+	$(transform-prebuilt-to-target)
+
+ALL_PREBUILT += $(copy_to)
 
 # files that live under /...
 file := $(TARGET_ROOT_OUT)/init.rc
@@ -24,6 +23,12 @@ $(file) : $(LOCAL_PATH)/rootdir/init.rc | $(ACP)
 ALL_PREBUILT += $(file)
 $(INSTALLED_RAMDISK_TARGET): $(file)
 
+file := $(TARGET_ROOT_OUT)/init.qcom.rc
+$(file) : $(LOCAL_PATH)/rootdir/init.qcom.rc | $(ACP)
+	$(transform-prebuilt-to-target)
+ALL_PREBUILT += $(file)
+$(INSTALLED_RAMDISK_TARGET): $(file)
+
 
 # kernel stuff...
 

diff --git a/glue/gonk/device/toro/maguro/BoardConfig.mk b/glue/gonk/device/toro/maguro/BoardConfig.mk
@@ -33,6 +33,7 @@ ifeq ($(QC_PROP),true)
 else
 #    BOARD_USES_GENERIC_AUDIO := true
     USE_CAMERA_STUB := true
+    BOARD_HAVE_BLUETOOTH := true
 
 endif # QC_PROP
 

diff --git a/glue/gonk/device/toro/maguro/etc/init.qcom.bt.sh b/glue/gonk/device/toro/maguro/etc/init.qcom.bt.sh
@@ -0,0 +1,131 @@
+#!/system/bin/sh
+# Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Code Aurora nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+BLUETOOTH_SLEEP_PATH=/proc/bluetooth/sleep/proto
+LOG_TAG="qcom-bluetooth"
+LOG_NAME="${0}:"
+
+hciattach_pid=""
+
+loge ()
+{
+  /system/bin/log -t $LOG_TAG -p e "$LOG_NAME $@"
+}
+
+logi ()
+{
+  /system/bin/log -t $LOG_TAG -p i "$LOG_NAME $@"
+}
+
+failed ()
+{
+  loge "$1: exit code $2"
+  exit $2
+}
+
+start_hciattach ()
+{
+  /system/bin/hciattach -n $BTS_DEVICE $BTS_TYPE $BTS_BAUD &
+  hciattach_pid=$!
+  logi "start_hciattach: pid = $hciattach_pid"
+  echo 1 > $BLUETOOTH_SLEEP_PATH
+}
+
+kill_hciattach ()
+{
+  echo 0 > $BLUETOOTH_SLEEP_PATH
+  logi "kill_hciattach: pid = $hciattach_pid"
+  ## careful not to kill zero or null!
+  kill -TERM $hciattach_pid
+  # this shell doesn't exit now -- wait returns for normal exit
+}
+
+# mimic hciattach options parsing -- maybe a waste of effort
+USAGE="hciattach [-n] [-p] [-b] [-t timeout] [-s initial_speed] <tty> <type | id> [speed] [flow|noflow] [bdaddr]"
+
+while getopts "blnpt:s:" f
+do
+  case $f in
+  b | l | n | p)  opt_flags="$opt_flags -$f" ;;
+  t)      timeout=$OPTARG;;
+  s)      initial_speed=$OPTARG;;
+  \?)     echo $USAGE; exit 1;;
+  esac
+done
+shift $(($OPTIND-1))
+
+# Note that "hci_qcomm_init -e" prints expressions to set the shell variables
+# BTS_DEVICE, BTS_TYPE, BTS_BAUD, and BTS_ADDRESS.
+
+#Selectively Disable sleep
+BOARD=`getprop ro.product.device`
+
+POWER_CLASS=`getprop qcom.bt.dev_power_class`
+
+#find the transport type
+TRANSPORT=`getprop ro.qualcomm.bt.hci_transport`
+logi "Transport : $TRANSPORT"
+
+case $POWER_CLASS in
+  1) PWR_CLASS="-p 0" ;
+     logi "Power Class: 1";;
+  2) PWR_CLASS="-p 1" ;
+     logi "Power Class: 2";;
+  3) PWR_CLASS="-p 2" ;
+     logi "Power Class: CUSTOM";;
+  *) PWR_CLASS="";
+     logi "Power Class: Ignored. Default(1) used (1-CLASS1/2-CLASS2/3-CUSTOM)";
+     logi "Power Class: To override, Before turning BT ON; setprop qcom.bt.dev_power_class <1 or 2 or 3>";;
+esac
+
+eval $(/system/bin/hci_qcomm_init -e $PWR_CLASS && echo "exit_code_hci_qcomm_init=0" || echo "exit_code_hci_qcomm_init=1")
+
+case $exit_code_hci_qcomm_init in
+  0) logi "Bluetooth QSoC firmware download succeeded, $BTS_DEVICE $BTS_TYPE $BTS_BAUD $BTS_ADDRESS";;
+  *) failed "Bluetooth QSoC firmware download failed" $exit_code_hci_qcomm_init;;
+esac
+
+# init does SIGTERM on ctl.stop for service
+# TODO(mvines): In the B2G userspace, this "trap" causes sh to segfault.  Comment for now.
+#trap "kill_hciattach" TERM INT
+
+case $TRANSPORT in
+    "smd")
+        logi "Seting property to insert the hci smd transport module"
+        setprop bt.hci_smd.driver.load 1
+     ;;
+     *)
+        logi "start hciattach"
+        start_hciattach
+
+        wait $hciattach_pid
+        logi "Bluetooth stopped"
+     ;;
+esac
+
+exit 0
diff --git a/glue/gonk/device/toro/maguro/etc/init.qcom.post_boot.sh b/glue/gonk/device/toro/maguro/etc/init.qcom.post_boot.sh
@@ -0,0 +1,147 @@
+#!/system/bin/sh
+# Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#     * Redistributions of source code must retain the above copyright
+#       notice, this list of conditions and the following disclaimer.
+#     * Redistributions in binary form must reproduce the above copyright
+#       notice, this list of conditions and the following disclaimer in the
+#       documentation and/or other materials provided with the distribution.
+#     * Neither the name of Code Aurora nor
+#       the names of its contributors may be used to endorse or promote
+#       products derived from this software without specific prior written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+# NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+target=`getprop ro.product.device`
+case "$target" in
+    "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_surf" | "msm7627a" | "msm7627a_sku1" | "msm7627a_sku3" |\
+    "qsd8250_surf" | "qsd8250_ffa" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "qsd8650a_st1x")
+        echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+        echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
+        chown system /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "msm7201a_ffa" | "msm7201a_surf")
+        echo 500000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "msm7630_surf" | "msm7630_1x" | "msm7630_fusion")
+        echo 75000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+        echo 1 > /sys/module/pm2/parameters/idle_sleep_mode
+        ;;
+esac
+
+case "$target" in
+     "msm7201a_ffa" | "msm7201a_surf" | "msm7627_ffa" | "msm7627_surf" | "msm7630_surf" | "msm7630_1x" | "msm7630_fusion" | "msm7627a" | "msm7627a_sku1" | "msm7627a_sku3" )
+        echo 245760 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+        ;;
+esac
+
+case "$target" in
+    "msm8660_surf" | "msm8660_csfb")
+	 echo 1 > /sys/module/rpm_resources/enable_low_power/L2_cache
+	 echo 1 > /sys/module/rpm_resources/enable_low_power/pxo
+	 echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_dig
+	 echo 2 > /sys/module/rpm_resources/enable_low_power/vdd_mem
+	 echo 1 > /sys/module/rpm_resources/enable_low_power/rpm_cpu
+	 echo 1 > /sys/module/pm_8x60/modes/cpu0/power_collapse/suspend_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu1/power_collapse/suspend_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu0/standalone_power_collapse/suspend_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu1/standalone_power_collapse/suspend_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu0/power_collapse/idle_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu1/power_collapse/idle_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu0/standalone_power_collapse/idle_enabled
+	 echo 1 > /sys/module/pm_8x60/modes/cpu1/standalone_power_collapse/idle_enabled
+	 echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+	 echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+	 echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+	 echo 50000 > /sys/devices/system/cpu/cpu1/cpufreq/ondemand/sampling_rate
+	 echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
+	 echo 90 > /sys/devices/system/cpu/cpu1/cpufreq/ondemand/up_threshold
+	 echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+	 echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+	 chown system /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+	 chown system /sys/devices/system/cpu/cpu1/cpufreq/ondemand/sampling_rate
+	 echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+	 echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+	 chown system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+	 chown system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+	 chown system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
+	 chown system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+	 chown root.system /sys/devices/system/cpu/mfreq
+	 chmod 220 /sys/devices/system/cpu/mfreq
+	 chown root.system /sys/devices/system/cpu/cpu1/online
+	 chmod 664 /sys/devices/system/cpu/cpu1/online
+        ;;
+esac
+
+case "$target" in
+    "msm8960")
+     echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+     echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
+     echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+     echo 50000 > /sys/devices/system/cpu/cpu1/cpufreq/ondemand/sampling_rate
+     echo 90 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
+     echo 90 > /sys/devices/system/cpu/cpu1/cpufreq/ondemand/up_threshold
+     echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/io_is_busy
+     echo 4 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+     chown system /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+     chown system /sys/devices/system/cpu/cpu1/cpufreq/ondemand/sampling_rate
+     echo 384000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+     echo 384000 > /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+     chown system /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+     chown system /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+     chown system /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
+     chown system /sys/devices/system/cpu/cpu1/cpufreq/scaling_min_freq
+     chown root.system /sys/devices/system/cpu/mfreq
+     chmod 220 /sys/devices/system/cpu/mfreq
+     chown root.system /sys/devices/system/cpu/cpu1/online
+     chmod 664 /sys/devices/system/cpu/cpu1/online
+        ;;
+esac
+
+case "$target" in
+    "msm7627_ffa" | "msm7627_surf" | "msm7627a" | "msm7627a_sku1" | "msm7627a_sku3")
+        echo 25000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "qsd8250_surf" | "qsd8250_ffa" | "qsd8650a_st1x")
+        echo 50000 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+        ;;
+esac
+
+case "$target" in
+    "qsd8650a_st1x")
+        mount -t debugfs none /sys/kernel/debug
+    ;;
+esac
+
+emmc_boot=`getprop ro.emmc`
+case "$emmc_boot"
+    in "1")
+        chown system /sys/devices/platform/rs300000a7.65536/force_sync
+        chown system /sys/devices/platform/rs300000a7.65536/sync_sts
+        chown system /sys/devices/platform/rs300100a7.65536/force_sync
+        chown system /sys/devices/platform/rs300100a7.65536/sync_sts
+    ;;
+esac
diff --git a/glue/gonk/device/toro/maguro/extract-files.sh b/glue/gonk/device/toro/maguro/extract-files.sh
@@ -233,7 +233,11 @@ copy_files "$COMMON_LIBS" "system/lib" ""
 COMMON_BINS="
 	rild
 	rmt_storage
+   hciattach
+   abtfilt
+   hci_qcomm_init
 	"
+
 copy_files "$COMMON_BINS" "system/bin" ""
 
 COMMON_EGL="