feature k210 #16

masayuki2009 · 2019-12-30T13:43:17Z

Summary

Added initial support for Sipeed Maix Bit board with Kendryte K210 processor.
K210 has two RV64GC cores but in this PR only the primary core is enabled.

Impact

Some common files for RISC-V have been modified to support RV64GC.
I also checked this PR with my SparkFun RED-V Plus which has SiFive FE310 core (RV32IMAC)

Limitations / TODO

Because this is a initial porting some drivers such as GPIO/I2C/SPI are missing.
Also, nuttx (elf file) must be loaded with openocd-k210.

These limitations and TODO are described in README.txt under the board directory.

Testing

I confirmed that ostest passed. Also, basic commands such as uname/ps/free/sleep work as well.

patacongo · 2019-12-30T14:38:51Z

include/stdint.h

 typedef _intptr_t           intptr_t;
 typedef _uintptr_t          uintptr_t;
+#endif



I don't believe that this is a correct change. You should not put any CPU specific definitions in the POSIX standard stdint.h. That is the wrong way to go. It violates the basic layering within the OS.

Instead, you need to change arch/risc-v/include/types.h. That is the appropriate place for this change. arch/risc-v/include/types.h defines _intptr_t and _uintptr_t and is included by include/stdint.h. This was designed this way to specifically to prohibit CPU-specific changes in stdint.h.

@patacongo Thanks for the comment. I understand what I should do. I'll fix the commits and force to push again.

masayuki2009 · 2019-12-31T03:20:05Z

@patacongo I fixed what you pointed out and pushed again.

Author: Gregory Nutt <gnutt@nuttx.org> Run all .c and .h modified in PR through nxstyle. Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com> feature k210 (#16) * arch: risc-v: Add support for __LP64__ to types.h * arch: risc-v: Add support for RV64GC to common files * arch: risc-v: Add support for Kendryte K210 processor (RV64GC) * boards: risk-v: Add support for Sipeed Maix Bit with K210 * tools: Add support for Kendryte K210 processor

ASAN trace: ... ==32087==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf4502120 at pc 0x56673ca3 bp 0xff9b6a08 sp 0xff9b69f8 WRITE of size 1 at 0xf4502120 thread T0 #0 0x56673ca2 in strcpy string/lib_strcpy.c:64 0xf4502120 is located 0 bytes to the right of 8224-byte region [0xf4500100,0xf4502120) allocated by thread T0 here: #0 0xf7a60f54 in malloc (/usr/lib32/libasan.so.4+0xe5f54) #1 0x5667725d in up_create_stack sim/up_createstack.c:135 #2 0x56657ed8 in nxthread_create task/task_create.c:125 #3 0x566580bb in kthread_create task/task_create.c:297 #4 0x5665935f in work_start_highpri wqueue/kwork_hpthread.c:149 #5 0x56656f31 in nx_workqueues init/nx_bringup.c:181 #6 0x56656fc6 in nx_bringup init/nx_bringup.c:436 apache#7 0x56656e95 in nx_start init/nx_start.c:809 apache#8 0x566548d4 in main sim/up_head.c:95 apache#9 0xf763ae80 in __libc_start_main (/lib/i386-linux-gnu/libc.so.6+0x18e80) CALLSTACK: apache#8 0xf79de7a5 in __asan_report_store1 () from /usr/lib32/libasan.so.4 apache#9 0x565fd4d7 in strcpy (dest=0xf4a02121 "", src=0xf5c00895 "k") at string/lib_strcpy.c:64 apache#10 0x565e4eb2 in nxtask_setup_stackargs (tcb=0xf5c00810, argv=0x0) at task/task_setup.c:570 apache#11 0x565e50ff in nxtask_setup_arguments (tcb=0xf5c00810, name=0x5679e580 "hpwork", argv=0x0) at task/task_setup.c:714 apache#12 0x565e414e in nxthread_create (name=0x5679e580 "hpwork", ttype=2 '\002', priority=224, stack=0x0, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:143 apache#13 0x565e42e3 in kthread_create (name=0x5679e580 "hpwork", priority=224, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:297 apache#14 0x565e5557 in work_start_highpri () at wqueue/kwork_hpthread.c:149 apache#15 0x565e3e32 in nx_workqueues () at init/nx_bringup.c:181 apache#16 0x565e3ec7 in nx_bringup () at init/nx_bringup.c:436 apache#17 0x565e3d96 in nx_start () at init/nx_start.c:809 apache#18 0x565e3195 in main (argc=1, argv=0xffe6b954, envp=0xffe6b95c) at sim/up_head.c:95 Change-Id: I096f7952aae67d055daa737e967242eb217ef8ac Signed-off-by: chao.an <anchao@xiaomi.com>

ASAN trace: ... ==32087==ERROR: AddressSanitizer: heap-buffer-overflow on address 0xf4502120 at pc 0x56673ca3 bp 0xff9b6a08 sp 0xff9b69f8 WRITE of size 1 at 0xf4502120 thread T0 #0 0x56673ca2 in strcpy string/lib_strcpy.c:64 0xf4502120 is located 0 bytes to the right of 8224-byte region [0xf4500100,0xf4502120) allocated by thread T0 here: #0 0xf7a60f54 in malloc (/usr/lib32/libasan.so.4+0xe5f54) #1 0x5667725d in up_create_stack sim/up_createstack.c:135 #2 0x56657ed8 in nxthread_create task/task_create.c:125 #3 0x566580bb in kthread_create task/task_create.c:297 #4 0x5665935f in work_start_highpri wqueue/kwork_hpthread.c:149 #5 0x56656f31 in nx_workqueues init/nx_bringup.c:181 #6 0x56656fc6 in nx_bringup init/nx_bringup.c:436 #7 0x56656e95 in nx_start init/nx_start.c:809 #8 0x566548d4 in main sim/up_head.c:95 #9 0xf763ae80 in __libc_start_main (/lib/i386-linux-gnu/libc.so.6+0x18e80) CALLSTACK: #8 0xf79de7a5 in __asan_report_store1 () from /usr/lib32/libasan.so.4 #9 0x565fd4d7 in strcpy (dest=0xf4a02121 "", src=0xf5c00895 "k") at string/lib_strcpy.c:64 #10 0x565e4eb2 in nxtask_setup_stackargs (tcb=0xf5c00810, argv=0x0) at task/task_setup.c:570 #11 0x565e50ff in nxtask_setup_arguments (tcb=0xf5c00810, name=0x5679e580 "hpwork", argv=0x0) at task/task_setup.c:714 #12 0x565e414e in nxthread_create (name=0x5679e580 "hpwork", ttype=2 '\002', priority=224, stack=0x0, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:143 #13 0x565e42e3 in kthread_create (name=0x5679e580 "hpwork", priority=224, stack_size=8192, entry=0x565e54e1 <work_hpthread>, argv=0x0) at task/task_create.c:297 #14 0x565e5557 in work_start_highpri () at wqueue/kwork_hpthread.c:149 #15 0x565e3e32 in nx_workqueues () at init/nx_bringup.c:181 #16 0x565e3ec7 in nx_bringup () at init/nx_bringup.c:436 #17 0x565e3d96 in nx_start () at init/nx_start.c:809 #18 0x565e3195 in main (argc=1, argv=0xffe6b954, envp=0xffe6b95c) at sim/up_head.c:95 Change-Id: I096f7952aae67d055daa737e967242eb217ef8ac Signed-off-by: chao.an <anchao@xiaomi.com>

…nnerat-images-devkit Feature/sdc integration generation images for devkit

Deadlock during recursive access if unionfs overlays procfs, check the critical segment only and remove the useless protection part. |#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136 ... |#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412 |apache#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026 original call stack: (gdb) bt |#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136 |#1 0x08071629 in mountpoint_filter (node=0xf3df4540, dirpath=0xf3df4a28 "/proc", arg=0xf3de2fc4) at mount/fs_foreachmountpoint.c:119 |#2 0x0807171b in foreach_inodelevel (node=0xf3df4540, info=0xf3df4a20) at inode/fs_foreachinode.c:90 |#3 0x08071898 in foreach_inode (handler=0x8071530 <mountpoint_filter>, arg=0xf3de2fc4) at inode/fs_foreachinode.c:193 |#4 0x080716c1 in foreach_mountpoint (handler=0x8070e2f <blocks_entry>, arg=0xf3de300c) at mount/fs_foreachmountpoint.c:169 |#5 0x08071399 in mount_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at mount/fs_procfs_mount.c:537 |#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412 |apache#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026 |apache#8 0x080657a2 in file_read (filep=0xf3de219c, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:110 |apache#9 0x0806581a in nx_read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:175 |apache#10 0x08065847 in read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:206 |apache#11 0x0805a242 in nsh_catfile (vtbl=0xf3df3f10, cmd=0xf3df4378 "df", filepath=0x808d5ed "/proc/fs/blocks") at nsh_fsutils.c:116 |apache#12 0x0805b1de in cmd_df (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_mntcmds.c:73 |apache#13 0x08056370 in nsh_command (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_command.c:1061 |apache#14 0x08053b16 in nsh_execute (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0, redirfile=0x0, oflags=0) at nsh_parse.c:741 |apache#15 0x08055998 in nsh_parse_command (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2578 |apache#16 0x08055a7b in nsh_parse (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2662 |apache#17 0x0805d691 in nsh_session (pstate=0xf3df3f10, login=1 '\001', argc=1, argv=0xf3de34b0) at nsh_session.c:191 |apache#18 0x0805b542 in nsh_consolemain (argc=1, argv=0xf3de34b0) at nsh_consolemain.c:115 |apache#19 0x0805346c in nsh_main (argc=1, argv=0xf3de34b0) at nsh_main.c:168 |apache#20 0x0805075a in nxtask_startup (entrypt=0x805340a <nsh_main>, argc=1, argv=0xf3de34b0) at sched/task_startup.c:165 |apache#21 0x08049713 in nxtask_start () at task/task_start.c:144 |apache#22 0x00000000 in ?? () Change-Id: Ic4c7aff0ea50388a371c525745e817a787dabcca Signed-off-by: chao.an <anchao@xiaomi.com>

Deadlock during recursive access if unionfs overlays procfs, check the critical segment only and remove the useless protection part. |#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136 ... |#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412 |#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026 original call stack: (gdb) bt |#0 unionfs_statfs (mountpt=0xf3df4540, buf=0xf3de2f0c) at unionfs/fs_unionfs.c:2136 |#1 0x08071629 in mountpoint_filter (node=0xf3df4540, dirpath=0xf3df4a28 "/proc", arg=0xf3de2fc4) at mount/fs_foreachmountpoint.c:119 |#2 0x0807171b in foreach_inodelevel (node=0xf3df4540, info=0xf3df4a20) at inode/fs_foreachinode.c:90 |#3 0x08071898 in foreach_inode (handler=0x8071530 <mountpoint_filter>, arg=0xf3de2fc4) at inode/fs_foreachinode.c:193 |#4 0x080716c1 in foreach_mountpoint (handler=0x8070e2f <blocks_entry>, arg=0xf3de300c) at mount/fs_foreachmountpoint.c:169 |#5 0x08071399 in mount_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at mount/fs_procfs_mount.c:537 |#6 0x08069429 in procfs_read (filep=0xf3df4574, buffer=0xf3df4610 "...", buflen=1024) at procfs/fs_procfs.c:412 |#7 0x0806c339 in unionfs_read (filep=0xf3de219c, buffer=0xf3df4610 "...", buflen=1024) at unionfs/fs_unionfs.c:1026 |#8 0x080657a2 in file_read (filep=0xf3de219c, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:110 |#9 0x0806581a in nx_read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:175 |#10 0x08065847 in read (fd=3, buf=0xf3df4610, nbytes=1024) at vfs/fs_read.c:206 |#11 0x0805a242 in nsh_catfile (vtbl=0xf3df3f10, cmd=0xf3df4378 "df", filepath=0x808d5ed "/proc/fs/blocks") at nsh_fsutils.c:116 |#12 0x0805b1de in cmd_df (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_mntcmds.c:73 |#13 0x08056370 in nsh_command (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0) at nsh_command.c:1061 |#14 0x08053b16 in nsh_execute (vtbl=0xf3df3f10, argc=1, argv=0xf3de32c0, redirfile=0x0, oflags=0) at nsh_parse.c:741 |#15 0x08055998 in nsh_parse_command (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2578 |#16 0x08055a7b in nsh_parse (vtbl=0xf3df3f10, cmdline=0xf3df4378 "df") at nsh_parse.c:2662 |#17 0x0805d691 in nsh_session (pstate=0xf3df3f10, login=1 '\001', argc=1, argv=0xf3de34b0) at nsh_session.c:191 |#18 0x0805b542 in nsh_consolemain (argc=1, argv=0xf3de34b0) at nsh_consolemain.c:115 |#19 0x0805346c in nsh_main (argc=1, argv=0xf3de34b0) at nsh_main.c:168 |#20 0x0805075a in nxtask_startup (entrypt=0x805340a <nsh_main>, argc=1, argv=0xf3de34b0) at sched/task_startup.c:165 |#21 0x08049713 in nxtask_start () at task/task_start.c:144 |#22 0x00000000 in ?? () Change-Id: Ic4c7aff0ea50388a371c525745e817a787dabcca Signed-off-by: chao.an <anchao@xiaomi.com>

VELAPLATFO-1942 -apache#9 0xf7abf899 in __asan::__asan_report_load2 (addr=4072681776) at ../../../../../src/libsanitizer/asan/asan_rtl.cc:117 -apache#10 0x5693f718 in inode_release (node=0xf2c03124) at inode/fs_inoderelease.c:69 -apache#11 0x568ea61b in file_close (filep=0xf55fedd0) at vfs/fs_close.c:79 -apache#12 0x568e7e56 in nx_close (fd=3) at inode/fs_files.c:528 -apache#13 0x568e7f0e in close (fd=3) at inode/fs_files.c:562 -apache#14 0x56e76c39 in epoll_close (epfd=3) at vfs/fs_epoll.c:252 -apache#15 0x56c33829 in sensor_service_delete (ctrl=0x578b8540 <control>) at src/common.c:439 -apache#16 0x56a0561e in sensor_middle_service_main (argc=1, argv=0xf55de820) at sensor_main.c:118 -apache#17 0x56878675 in nxtask_startup (entrypt=0x56a054cc <sensor_middle_service_main>, argc=1, argv=0xf55de820) at sched/task_startup.c:70 -apache#18 0x5684427a in nxtask_start () at task/task_start.c:133 -apache#19 0xdeadbeef in ?? () reason: epoll_close -> close -> epoll_do_close (free inode) -> inode_release (reuse inode, crash) fix: use the global inode to match the fd which will return to user. like the g_sock_inode in fs/socket/socket.c Change-Id: I0096ac691ce9cf4169d1fb8bfa6d27a8c1ee7d52 Signed-off-by: ligd <liguiding1@xiaomi.com>

-apache#9 0xf7abf899 in __asan::__asan_report_load2 (addr=4072681776) at ../../../../../src/libsanitizer/asan/asan_rtl.cc:117 -apache#10 0x5693f718 in inode_release (node=0xf2c03124) at inode/fs_inoderelease.c:69 -apache#11 0x568ea61b in file_close (filep=0xf55fedd0) at vfs/fs_close.c:79 -apache#12 0x568e7e56 in nx_close (fd=3) at inode/fs_files.c:528 -apache#13 0x568e7f0e in close (fd=3) at inode/fs_files.c:562 -apache#14 0x56e76c39 in epoll_close (epfd=3) at vfs/fs_epoll.c:252 -apache#15 0x56c33829 in sensor_service_delete (ctrl=0x578b8540 <control>) at src/common.c:439 -apache#16 0x56a0561e in sensor_middle_service_main (argc=1, argv=0xf55de820) at sensor_main.c:118 -apache#17 0x56878675 in nxtask_startup (entrypt=0x56a054cc <sensor_middle_service_main>, argc=1, argv=0xf55de820) at sched/task_startup.c:70 -apache#18 0x5684427a in nxtask_start () at task/task_start.c:133 -apache#19 0xdeadbeef in ?? () reason: epoll_close -> close -> epoll_do_close (free inode) -> inode_release (reuse inode, crash) fix: use the global inode to match the fd which will return to user. like the g_sock_inode in fs/socket/socket.c Signed-off-by: ligd <liguiding1@xiaomi.com>

-#9 0xf7abf899 in __asan::__asan_report_load2 (addr=4072681776) at ../../../../../src/libsanitizer/asan/asan_rtl.cc:117 -#10 0x5693f718 in inode_release (node=0xf2c03124) at inode/fs_inoderelease.c:69 -#11 0x568ea61b in file_close (filep=0xf55fedd0) at vfs/fs_close.c:79 -#12 0x568e7e56 in nx_close (fd=3) at inode/fs_files.c:528 -#13 0x568e7f0e in close (fd=3) at inode/fs_files.c:562 -#14 0x56e76c39 in epoll_close (epfd=3) at vfs/fs_epoll.c:252 -#15 0x56c33829 in sensor_service_delete (ctrl=0x578b8540 <control>) at src/common.c:439 -#16 0x56a0561e in sensor_middle_service_main (argc=1, argv=0xf55de820) at sensor_main.c:118 -#17 0x56878675 in nxtask_startup (entrypt=0x56a054cc <sensor_middle_service_main>, argc=1, argv=0xf55de820) at sched/task_startup.c:70 -#18 0x5684427a in nxtask_start () at task/task_start.c:133 -#19 0xdeadbeef in ?? () reason: epoll_close -> close -> epoll_do_close (free inode) -> inode_release (reuse inode, crash) fix: use the global inode to match the fd which will return to user. like the g_sock_inode in fs/socket/socket.c Signed-off-by: ligd <liguiding1@xiaomi.com>

The different optimization of compilers will cause ambiguity in obtaining sp through up_getsp() in arm_stack_color(), if compile with clang and enable the optimization flag (-Ofast), up_getsp() call will be earlier than push {r0-r9,lr}, the end address of color stack will overlap with saved registers. Compile line: clang --target=arm-none-eabi -c "-Ofast" -fno-builtin -march=armv8.1-m.main+mve.fp+fp.dp \ -mtune=cortex-m55 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -D__NuttX__ -common/arm_checkstack.c -o arm_checkstack.o Assembler code: llvm-objdump -aS arm_checkstack.o ------------------------------------ |00000000 <arm_stack_color>: |; start = INT32_ALIGN_UP((uintptr_t)stackbase); | 0: c2 1c adds r2, r0, #3 | 2: 22 f0 03 02 bic r2, r2, #3 |; end = nbytes ? INT32_ALIGN_DOWN((uintptr_t)stackbase + nbytes) : | 6: 19 b1 cbz r1, 0x10 <arm_stack_color+0x10> @ imm = #6 | 8: 08 44 add r0, r1 | a: 20 f0 03 00 bic r0, r0, #3 | e: 00 e0 b 0x12 <arm_stack_color+0x12> @ imm = #0 |; __asm__ | 10: 68 46 mov r0, sp <--- fetch the sp before push {r7 lr} | 12: 80 b5 push {r7, lr} <--- sp changed |; nwords = (end - start) >> 2; | 14: 80 1a subs r0, r0, r2 | 16: 80 08 lsrs r0, r0, #2 |; } | 18: 08 bf it eq | 1a: 80 bd popeq {r7, pc} | 1c: 4b f6 ef 63 movw r3, #48879 | 20: cd f6 ad 63 movt r3, #57005 | 24: a0 ee 10 3b vdup.32 q0, r3 |; while (nwords-- > 0) | 28: 20 f0 01 e0 dlstp.32 lr, r0 |; *ptr++ = STACK_COLOR; | 2c: a2 ec 04 1f vstrw.32 q0, [r2], apache#16 | 30: 1f f0 05 c0 letp lr, 0x2c <arm_stack_color+0x2c> @ imm = #-8 |; } | 34: 80 bd pop {r7, pc} ------------------------------------ Signed-off-by: chao.an <anchao@xiaomi.com>

The different optimization of compilers will cause ambiguity in obtaining sp through up_getsp() in arm_stack_color(), if compile with clang and enable the optimization flag (-Ofast), up_getsp() call will be earlier than push {r0-r9,lr}, the end address of color stack will overlap with saved registers. Compile line: clang --target=arm-none-eabi -c "-Ofast" -fno-builtin -march=armv8.1-m.main+mve.fp+fp.dp \ -mtune=cortex-m55 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -D__NuttX__ -common/arm_checkstack.c -o arm_checkstack.o Assembler code: llvm-objdump -aS arm_checkstack.o ------------------------------------ |00000000 <arm_stack_color>: |; start = INT32_ALIGN_UP((uintptr_t)stackbase); | 0: c2 1c adds r2, r0, #3 | 2: 22 f0 03 02 bic r2, r2, #3 |; end = nbytes ? INT32_ALIGN_DOWN((uintptr_t)stackbase + nbytes) : | 6: 19 b1 cbz r1, 0x10 <arm_stack_color+0x10> @ imm = #6 | 8: 08 44 add r0, r1 | a: 20 f0 03 00 bic r0, r0, #3 | e: 00 e0 b 0x12 <arm_stack_color+0x12> @ imm = #0 |; __asm__ | 10: 68 46 mov r0, sp <--- fetch the sp before push {r7 lr} | 12: 80 b5 push {r7, lr} <--- sp changed |; nwords = (end - start) >> 2; | 14: 80 1a subs r0, r0, r2 | 16: 80 08 lsrs r0, r0, #2 |; } | 18: 08 bf it eq | 1a: 80 bd popeq {r7, pc} | 1c: 4b f6 ef 63 movw r3, #48879 | 20: cd f6 ad 63 movt r3, #57005 | 24: a0 ee 10 3b vdup.32 q0, r3 |; while (nwords-- > 0) | 28: 20 f0 01 e0 dlstp.32 lr, r0 |; *ptr++ = STACK_COLOR; <--- overwrite | 2c: a2 ec 04 1f vstrw.32 q0, [r2], apache#16 | 30: 1f f0 05 c0 letp lr, 0x2c <arm_stack_color+0x2c> @ imm = #-8 |; } | 34: 80 bd pop {r7, pc} ------------------------------------ Signed-off-by: chao.an <anchao@xiaomi.com>

The different optimization of compilers will cause ambiguity in obtaining sp through up_getsp() in arm_stack_color(), if compile with clang and enable the optimization flag (-Ofast), up_getsp() call will be earlier than push {r0-r9,lr}, the end address of color stack will overlap with saved registers. Compile line: clang --target=arm-none-eabi -c "-Ofast" -fno-builtin -march=armv8.1-m.main+mve.fp+fp.dp \ -mtune=cortex-m55 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -D__NuttX__ -common/arm_checkstack.c -o arm_checkstack.o Assembler code: llvm-objdump -aS arm_checkstack.o ------------------------------------ |00000000 <arm_stack_color>: |; start = INT32_ALIGN_UP((uintptr_t)stackbase); | 0: c2 1c adds r2, r0, #3 | 2: 22 f0 03 02 bic r2, r2, #3 |; end = nbytes ? INT32_ALIGN_DOWN((uintptr_t)stackbase + nbytes) : | 6: 19 b1 cbz r1, 0x10 <arm_stack_color+0x10> @ imm = #6 | 8: 08 44 add r0, r1 | a: 20 f0 03 00 bic r0, r0, #3 | e: 00 e0 b 0x12 <arm_stack_color+0x12> @ imm = #0 |; __asm__ | 10: 68 46 mov r0, sp <--- fetch the sp before push {r7 lr} | 12: 80 b5 push {r7, lr} <--- sp changed |; nwords = (end - start) >> 2; | 14: 80 1a subs r0, r0, r2 | 16: 80 08 lsrs r0, r0, #2 |; } | 18: 08 bf it eq | 1a: 80 bd popeq {r7, pc} | 1c: 4b f6 ef 63 movw r3, #48879 | 20: cd f6 ad 63 movt r3, #57005 | 24: a0 ee 10 3b vdup.32 q0, r3 |; while (nwords-- > 0) | 28: 20 f0 01 e0 dlstp.32 lr, r0 |; *ptr++ = STACK_COLOR; <--- overwrite | 2c: a2 ec 04 1f vstrw.32 q0, [r2], #16 | 30: 1f f0 05 c0 letp lr, 0x2c <arm_stack_color+0x2c> @ imm = #-8 |; } | 34: 80 bd pop {r7, pc} ------------------------------------ Signed-off-by: chao.an <anchao@xiaomi.com>

Signed-off-by: 田昕 <tianxin7@xiaomi.com> workqueue: add work_foreach support Signed-off-by: ligd <liguiding1@xiaomi.com> arch/risc-v: Rename up_fpuconfig to riscv_fpuconfig Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Use riscv_fpuconfig to enable FPU Use common function instead of chip specified code. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> riscv/bl602: Implement SPI Cmd/Data To control the Data/Command Pin on ST7789 SPI Display, the SPI Driver flips the MISO Pin as though it was a GPIO. To implement this on BL602, we reconfigure MISO from SPI Pin to GPIO Pin on the fly inside `bl602_spi_cmddata()`. When the SPI Port is deselected (after the SPI operation), we revert MISO back from GPIO Pin to SPI Pin. We implement this inside `bl602_spi_select()`. [More Details Here](https://github.com/lupyuen/st7789-nuttx#spi-cmddata) This change impacts 3 LCD drivers that call `SPI_CMDDATA()`: ST7735, ST7789, GC9A01. Previously the BL602 SPI Driver would fail with "SPI cmddata not supported" when the above drivers are used. After the change, the above drivers will set the LCD Data/Command Pin correctly. We tested this implementation of SPI Cmd/Data with NuttX ST7789 Driver and a Logic Analyser on PineCone BL602: - [Testing with Logic Analyser](https://github.com/lupyuen/st7789-nuttx#spi-cmddata) We also tested LVGL with ST7789 on PineCone BL602: - [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo) As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602: - [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-29) arch/risc-v/litex: add cache_invalidate driver/mmcsd: add option to support SD/MMC PHYs that only run in 4-bit mode arch/risc-v/src/litex/litex_sdio: add litesdcard peripheral driver See the following for details on the pepheral: https://github.com/enjoy-digital/litesdcard boards/risc-v/litex/arty_a7: add SDCARD support for the Arty_A7 board boards/risc-v/litex/arty_a7: update README to include building in LITESDCARD peripheral opendir: use inode_find() instead when opendir() Signed-off-by: ligd <liguiding1@xiaomi.com> arm/cortex-[a|r]: IRQ Switch return should with shadow SPSR The SPSR is used to store the current value of the CPSR when an exception is taken so that it can be restored after handling the exception. Each exception handling mode can access its own SPSR. User mode and System mode do not have an SPSR because they are not exception handling modes. Signed-off-by: chao.an <anchao@xiaomi.com> signal: Don't do schedule_sigaction when there is no action Signed-off-by: ligd <liguiding1@xiaomi.com> task: don't set default signal in kernal thread Signed-off-by: ligd <liguiding1@xiaomi.com> riscv/bl602: Remove check for LCD driver `bl602_spi_cmddata()` implements SPI Cmd/Data `SPI_CMDDATA()` for only 3 LCD drivers: ST7735, ST7789 and GC9A01. This patch removes the check for LCD drivers, so that SPI Cmd/Data will work for all LCD drivers. More details: https://github.com/apache/incubator-nuttx/pull/5898 This change impacts LCD drivers that call `SPI_CMDDATA()`. Previously `SPI_CMDDATA()` would fail with `ENODEV` for LCD drivers other than ST7735, ST7789 and GC9A01. After patching, `SPI_CMDDATA()` will work correctly with all LCD drivers. We tested with LVGL and ST7789 on PineCone BL602: - [Testing with LVGL](https://github.com/lupyuen/st7789-nuttx#run-lvgl-demo) As for regular SPI Devices that don't require SPI Cmd/Data, we tested `CONFIG_SPI_CMDDATA=y` with Semtech SX1262 SPI Transceiver on PineCone BL602: - [Testing Cmd/Data](https://github.com/lupyuen/incubator-nuttx/releases/tag/release-2022-03-30) riscv/esp32c3: Remove check for LCD driver `esp32c3_spi2_cmddata()` implements SPI Cmd/Data `SPI_CMDDATA()` for only 3 LCD drivers: ST7735, ST7789 and GC9A01. This patch removes the check for LCD drivers, so that SPI Cmd/Data will work for all LCD drivers. More details: https://github.com/apache/incubator-nuttx/pull/5898 This change impacts LCD drivers that call `SPI_CMDDATA()`. Previously `SPI_CMDDATA()` would fail with `ENODEV` for LCD drivers other than ST7735, ST7789 and GC9A01. After patching, `SPI_CMDDATA()` will work correctly with all LCD drivers. This is a minor patch so no testing is needed. xtensa: Move XCHAL_SWINT_CALL definition into syscall header This is required to avoid the interface header (syscall.h) depending on the xtensa_swi.h header from the implementation Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> xtensa: Build OS-assisted atomic operations on ESP32-S2 ESP32-S2 lacks support for conditional load/store instructions. Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> risc-v/esp32c3: Fix inclusion of C++ constructors/destructors table RISC-V GCC is configured with --enable-initfini-array so it emits an .init_array section instead of .ctors Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> xtensa|risc-v: Make CXX exception and RTTI depend on Kconfig options Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> libcxx: Add patch for preventing redefinition of PS macro on Xtensa Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> libcxx: Fix libc++ for archs without conditional load/store support This commit brings a patch already merged to upstream LLVM project: https://reviews.llvm.org/D118391 Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> esp32[s2/s3/c3]: Add defconfigs for testing C++ Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> arch/arm: Make CXX exception and RTTI depend on Kconfig options Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> documentation: Add release notes for 10.3.0 release This is a local copy taken from the confluence notes https://cwiki.apache.org/confluence/display/NUTTX/NuttX+10.3 Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> fs/romfs: fix bug about compare path with same prefix Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> boards/boardctl:common boardctl to read reset cause. Signed-off-by: 田昕 <tianxin7@xiaomi.com> rptun: set rptun thread default stack size to 4K Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add rptun_force_panic support Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add rptun_reset support Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: use HPWORK instead of thread Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add rptun_panic for both master & salve Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add rpmsg_wait/post support for recursive dispatch Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: divide shram to TX & RX Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add rptun dump support Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: pm_stay when send msg & pm_relax when all tx buffer returned Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: enable rx interrupts for virtq use wait_tx_buffer method need enable rx interrupts Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: add ping rpmsg support Signed-off-by: ligd <liguiding1@xiaomi.com> openamp: add openamp patches 0006-openamp-fix-scenario-case.patch 0007-openamp-divide-shram-to-TX-shram-RX-shram.patch 0008-rpmsg_virtio-don-t-need-check-status-when-get_tx_pay.patch Signed-off-by: ligd <liguiding1@xiaomi.com> rptun: forward panic/reset to lowerhalf Signed-off-by: ligd <liguiding1@xiaomi.com> remove DISCLAIMER-WIP most licenses have been converted to Apache and the non Apache licenses have been documented. We can assume that now it should be the time to remove DISCLAIMER-WIP Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch/risc-v/mpfs: Remove duplicated riscv_restorefpu Signed-off-by: Huang Qi <huangqi3@xiaomi.com> ioe_rpmsg: use rptun_wait/post to resolve deadlock with usrsock Signed-off-by: ligd <liguiding1@xiaomi.com> arch/risc-v: Store/Restore FPU register in exception_common Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Rename up_doirq to riscv_doirq Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Remove deprecated logic from riscv_doirq Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Merge duplicated logic by riscv_doirq Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Dont' disable/enable irq in riscv_doirq Since these codes added to all chips but not fully tested, so we should changd this behavior. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Remove unneeded group_addrenv call which handled by riscv_doirq Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: move REGLOAD/REGSTORE macro to riscv_internal.h Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/risc-v: include csr.h indirectly through nuttx/irq.h Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/risc-v: fix ARCH_RV32 offset for the stub lookup table calculation Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> mm/mm_heap: place alloc-bit at the LSB of node->preceeding. Heap always allocate the memory at least 2bytes alignment. Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> mm_heap: heapsize align with MM_MIN_CHUNK. Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> driver/syslog: Add microseconds after date time Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> ARCH_ADDRENV: Add guard against mis-configuration When process a is switched to process b, the address environment is swapped with a call to group_addrenv(). The stack upon entry will be a's, and upon exit b's. This will fail, so a neutral stack is required, either a kernel stack or an IRQ stack. Infrastructure for an IRQ stack is already in place, so give a hint that an interrupt stack should be provided if address environments are enabled. arch/risc-v: get wider visibility for arch instruction macros Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> rpmsgfs: add wait ready to rpmsgfs Signed-off-by: ligd <liguiding1@xiaomi.com> rpmsgfs: add timeout when mount in rpmsgfs Signed-off-by: ligd <liguiding1@xiaomi.com> rpmsgfs: use rptun_wait/post to resolve deadlock with usrsock Signed-off-by: ligd <liguiding1@xiaomi.com> sigact: get free sigact from freelist always successful Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> netdev_file_ioctl: Fix fcntl F_SETFL O_NONBLOCK regression This fixes a regression caused by the following commit, which prevents the file flag from being updated. ``` commit 28860b5242dd5efd86b5da8a089e5d898cd8a9a1 Author: chao.an <anchao@xiaomi.com> Date: Sat Mar 19 14:47:37 2022 +0800 net/netdev: fix switch case missing break Signed-off-by: chao.an <anchao@xiaomi.com> ``` Note: some applications like mbedtls uses F_GETFL to confirm the nonblock-ness of the socket. This is critical for such applications. nuttx: Add "#include <nuttx/fs/ioctl.h>" to tioctl.h Signed-off-by: zhouliang3 <zhouliang3@xiaomi.com> fs/unionfs: fix bug about use after free about ui Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs/unionfs: check return value to avoid unused value Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs/unionfs: add sanity check for parameter if relpath is NULL, it will cause system crash: unionfs_opendir with relpath NULL -> unionfs_tryopendir -> unionfs_offsetpath -> strncmp(prefix, relpath, pfxlen Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> SEGGER_RTT: solve compile error when enable segger rtt in armv7m. 1. SEGGER_RTT_ASM_ARMv7M include SEGGER_RTT.h, and SEGGER_RTT.h include SEGGER_RTT_Conf.h, so add __ASSEMBLY__ in SEGGER_RTT_Conf.h; 2. AFLAG add segger/config because SEGGER_RTT_ASM_ARMv7M.S include SEGGER_RTT_Conf.h; Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> fs/procfstcbinfo: minor bug about print address Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs/romfs: fix string overflow when the length of rn_name exceeds NAME_MAX + 1 Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs and unistd: increase OPEN_MAX by claiming a Kconfig. Signed-off-by: 田昕 <tianxin7@xiaomi.com> rpmsgfs: do NOT access the pointer when do remote ioctl Signed-off-by: ligd <liguiding1@xiaomi.com> fs/rpmsgfs: fix bug about using uninit variable "times" Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> arch/xtensa: add syscall note support in the flat build Signed-off-by: chao.an <anchao@xiaomi.com> sched/note: unify the data format Signed-off-by: chao.an <anchao@xiaomi.com> sched/trace: correct the note print format note print should with Instruction pointer. e.g: trace_printk("hello NuttX"); trace dump: hello-6 [000] .... 23080.367994: 0xc044a005: hello NuttX Signed-off-by: chao.an <anchao@xiaomi.com> sched/note: add support of trace section mark The implementation of this feature is based on android systrace: https://source.android.com/devices/tech/debug/ftrace Application developers are more concerned about the performance of the specified application section, added two APIs to implement performance measurement: void sched_note_begin(uintptr_t ip, FAR const char *buf); void sched_note_end(uintptr_t ip, FAR const char *buf); or SCHED_NOTE_BEGIN(); /* defined to sched_note_begin(_THIS_IP_, __FUNCTION__) */ SCHED_NOTE_END(); /* defined to sched_note_end(_THIS_IP_, __FUNCTION__) */ Signed-off-by: chao.an <anchao@xiaomi.com> unistd:rename CONFIG_OPEN_MAX to CONFIG_LIBC_OPEN_MAX Signed-off-by: 田昕 <tianxin7@xiaomi.com> sim: Fix init of static C++ constructors when using glibc >= 2.34 glibc 2.34 changed the dynamic linker behavior during the startup process, which makes the previous "__init_array_start" replacement trick non-effective. Now the dynamic linker parses the constructors/destructors information from the DYNAMIC segment of the program. Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> libs/libc/lib_err.c:add va_end to vwarn call va_copy,after need call va_end Signed-off-by: anjiahao <anjiahao@xiaomi.com> local socket: cancel assert about backlog exceed 255 Signed-off-by: zhanghu6 <zhanghu6@xiaomi.com> net/local: change 255 to UINT8_MAX Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> power: unify lock states unify critical_section and nxsem with pm_lock/pm_unlock Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> power:driver: move pm_auto_update to outer dir Pm_auto_update maybe called by outter PM users Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> lib_chdir:use change ret judgment method Signed-off-by: anjiahao <anjiahao@xiaomi.com> modlib/modlib_bind:fix unsigned_compare with zero Signed-off-by: anjiahao <anjiahao@xiaomi.com> Update libs/libc/modlib/modlib_bind.c u are right Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com> Update libs/libc/modlib/modlib_bind.c Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com> mmcsd: Add gotextcsd callback to sdio_dev_s so the driver implementation could get critical EXTCSD info Signed-off-by: anjianjun <anjianjun@xiaomi.com> mmcsd: Move SDIO_GOTEXTCSD after SDIO_DMASENDSETUP Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> mmcsd: Fix mmc card error but system can not catch it Signed-off-by: anjianjun <anjianjun@xiaomi.com> risc-v/esp32c3: Fix regression on IRQ handling for ECALL instruction Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com> RISC-V: Implement option to run NuttX in supervisor mode (S-mode) - Add config "ARCH_USE_S_MODE" which controls whether the kernel runs in M-mode or S-mode - Add more MSTATUS and most of the SSTATUS register definitions - Add more MIP flags for interrupt delegation - Add handling of interrupts from S-mode - Add handling of FPU from S-mode - Add new context handling functions that are not dependent on the trap handlers / ecall NOTE: S-mode requires a companion SW (SBI) which is not yet implemented, thus S-mode is not usable as is, yet. RISC-V: Implement skeleton for a per CPU structure It might be useful to store things in memory per CPU. The tricky part is that all CPUs run the same code and see the same memory, so some kind of centralized access is required. For now, the structure contains the hart id. Access to the structure elements is provided via sscratch, which is unique for every hart! Fix ESP32-C3 toolchain download link arch/xtensa: Add xtensa_tcbinfo struct that contains helpful offsets. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> fix:Temporarily remove udp send large pkt assert Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com> net: tcp/udp/icmp/icmpv6 add FIONSPACE support Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com> timerexpiration:fix DEADCODE when RR_INTERVAL or SCHED_SPORADIC not select tmp is always true for CONFIG_RR_INTERVAL > 0 and CONFIG_SCHED_SPORADIC not select Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> arch/riscv: Align the macro definition in csr.h Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/riscv: Rename riscv_syscall_dispatch to riscv_dispatch_syscall follow other function naming(e.g. riscv_dispatch_irq) Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/riscv: Remove riscv_sbi.c since it doesn't exist Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/riscv: Rename riscv_exception_macros.S to riscv_macros.S since macro defined in this file is also used in the normal context Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/riscv: Access [m|s]scratch through CSR_SCRATCH macro Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/riscv: Rename g_scratch to g_percpu Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched_note: fix buffer size warning in coverity Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> mod_insmod: fix coverity warning Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> stm32: add support for up_perf boards/nucleo-f446re: initialize up_perf note_sysview.c: fix compilation for CONFIG_TASK_NAME_SIZE == 0 note_sysview.c: fix compilation if CONFIG_SCHED_INSTRUMENTATION_FILTER not defined arm/chip: add backtrace support for all chips that support thumb instruction set. Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> usrsock: Move event field to usrsock_message_common_s Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com> net:fix coverity warning Signed-off-by: hejianliang3 <hejianliang3@xiaomi.com> stm32u5: stm32_stdclockconfig fixes Fix stm32_stdclockconfig for stm32u585xx to the extend that the B-U585I-IOT02A board's clock tree can be configured. This board uses the MSIS as PLL1's input clock and the LSE to autotrim the MSIS. b-u585i-iot02a: Fix stdclock initialization Correct the respective defines to initialize the B-U585I-IOT02A clock tree correctly by means of stm32_stdclockconfig(). b-u585i-iot02a:nsh: Drop TrustedFirmware-M dependency Make the nsh defconfig for the b-u585i-iot02a run stand-alone (i.e. not as a companion that relies on TF-M doing low-level board initialization). net/utils: fix IPv4 checksum calculation Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/risc-v: use STACK_FRAME_SIZE for in S-mode syscall asm Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/riscv: Rename SCRATCH_HARTID_OFFSET to RISCV_PERCPU_HARTID_OFFSET and fix the typo error Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> modlib_bind.c: Restore "Relocation address out of range" checks Restore the checks which got completely broken by the following change. ``` commit 15142a8b106bee8db6ac744b963969feba5c8289 Author: anjiahao <anjiahao@xiaomi.com> Date: Fri Apr 1 16:20:03 2022 +0800 modlib/modlib_bind:fix unsigned_compare with zero Signed-off-by: anjiahao <anjiahao@xiaomi.com> ``` syscall: Fix Makefile:69: target 'syscall_names.o' given more than once in the same rule Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc/netdb: Support the recursive lock Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc/netdb: Remove the temporary unlock in dns_foreach_nameserver since netdb support the recursive lock Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc/netdb: Hold dns lock when operating with resolv.conf Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/xtensa: Build the xtensa_tcbinfo.c file for S2 and S3. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> nuttx: unify FAR attribute usage across the code Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> RISC-V: Fix file name of riscv_dispatch_syscall RISC-V: Fix usage of static_assert in riscv_percpu.c There is no alias for struct riscv_percu_s Update cpp_cmake.rst update CMAKE_C_FLAGS when compile C file Update cpp_cmake.rst openamp: Change the dependence from OPENAMP to RPTUN since all rpmsg driver need the extension api exposed by rptun driver Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc/string: Fix the minor style issue Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc: Avoid the compiler generate code call self(memcpy/memmove/memset/memcmp) recursively please reference the similar change done by other libc implementation: https://reviews.llvm.org/D68028?id=224286 https://github.com/bminor/glibc/commit/85c2e6110c9a01ec817c30f1b7e20549d7229987 https://github.com/bminor/musl/commit/4a1f55e92fa74ee382909baa96302231f566b5e1 https://github.com/bminor/newlib/commit/82dfae9ab0734b9946321590162dc6021057fec1 Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch:tcbinfo: update tcbinfo as xcpcontext update Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> jlink-nuttx: update regs as nuttx regs save path change Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> include/nuttx: remove double definitions of UNUSED macro Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> fix uinput rpmsg logic error xtensa/esp32: Add support to TWAI/CANBus controller esp32: Add board support to TWAI/CANBus arch/sim: support simulator keyboard devices arch/risc-v: Replace riscv_fault with riscv_exception Remove riscv_fault since its code is duplicated with riscv_exception, and there are textual excpetion reason in riscv_exception. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> fs/epoll: change type of eventset from uint8_t to uint32_t to support EPOLLONESHOT and so on. Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs/poll: change format for type pollevent_t Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> lib_lib_vsprintf/backtrace: fix the type issue using 't': For integer types, causes printf to expect a ptrdiff_t-sized integer argument. Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> fs/poll: change format for type pollevent_t complete the following commits: commit d87cf8d4ca5fe69c71c131015a7b64b68c917593 Author: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> Date: Fri Apr 1 20:59:55 2022 +0800 fs/poll: change format for type pollevent_t Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> commit d535943a69f03033b077cb95cce162bb28b40b56 Author: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> Date: Fri Apr 1 17:49:10 2022 +0800 fs/epoll: change type of eventset from uint8_t to uint32_t to support EPOLLONESHOT and so on. Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> Signed-off-by: chao.an <anchao@xiaomi.com> arch/risc-v: Remove the unnecessary inclusion of board header files Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> MPFS: Prepare support for S-mode - Access to PLIC via S-mode registers - Access to IRQs via S-mode registers / definitions - Initialize S-mode registers upon boot - Initialize per CPU area before nx_start NOTE: S-mode requires a companion SW (SBI) which is not yet implemented, thus S-mode is not usable as is, yet. esp32c3: Simplify irq dispatch logic ESP32C3 use customized irq encoding so it's hard to share further code with other risc-v based chips, in this patch, we keep the exception number definition with risc-v spec. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> Documentation/guides/pysimcoder.rst: update pysimCoder dependencies CONFIG_LIBM option may be required by some toolchains that do not include standard math library. Morover CONFIG_PTHREAD_STACK_MIN was listed twice in the list. Signed-off-by: Michal Lenc <michallenc@seznam.cz> arch/riscv: Minor style change and text correction Signed-off-by: Huang Qi <huangqi3@xiaomi.com> sched/pthread:need check pthread is DETACHED pthread_join need check thread is DETACHED, Whether to wait according to the result.And, if a thread is DETACHED,it will not set a new attr. Signed-off-by: anjiahao <anjiahao@xiaomi.com> sched/note: add dummy definition if CONFIG_SCHED_INSTRUMENTATION disabled Signed-off-by: chao.an <anchao@xiaomi.com> sched/note: correct flatten format Signed-off-by: chao.an <anchao@xiaomi.com> arm/armv[7|8]-m: skip the fpu save/restore if stack frame is integer-only Signed-off-by: chao.an <anchao@xiaomi.com> fs/vfs: fix st_mode mask check The full mask for st_mode is 0177777 Now modify any file permissions in hostfs and all will fail arch/risc-v: Add handler for misaligned load/store Some risc-v based chips don't support unaligned data access, it will trigger a exception and then lead to crash. In this patch, we handle the misaligned access by software to make system run continue. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> tools/checkrelease.sh: Don't check DISCLAIMER-WIP anymore since all license is clean up now Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/wqueue: Simplify CALL_WORKER dispatch condition Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/irq: Remove CONFIG_SCHED_IRQMONITOR when define CALL_VECTOR since up_perf_ API doesn't couple with CONFIG_SCHED_IRQMONITOR Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/irq: Fix array overrun in coverity check Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> boards/nucleo-h743zi2: Enable up_perf API Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> boards/lx_cpu: Enable up_perf API Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/risc-v: Align prototype of riscv_exception with xcpt_t Thus we can attach it to irq handler without any cast. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Attach exception handler in common place Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Move epc adjustment to riscv_doirq Signed-off-by: Huang Qi <huangqi3@xiaomi.com> checkpatch.sh: add -m option to enable/disable Change-Id check Defaultly disable Change-Id check in commit message. Signed-off-by: liuhaitao <liuhaitao@xiaomi.com> .github/workflows/check.yml: Enable Change-ID check explicitly Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Make top Make.defs symlink to board Make.defs instead Symlink to board Make.defs for top Make.defs, so top Make.defs syncs in realtime. Signed-off-by: liuhaitao <liuhaitao@xiaomi.com> riscv/riscv_exception_commin.S: Don't call riscv_hartid in single core mode. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> riscv/riscv_exception_common.S: Allow chips to define the exception section. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> riscv/esp32c3: Use the common exception handler. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> riscv/bl602/chip.h: Add assembly guards for standard includes. tools/mkdeps: Extend MAX_SHQUOTE to 3072 Signed-off-by: nietingting <nietingting@xiaomi.com> audio: Return audio_lowerhalf_s pointer instead error code in audio_comp_initialize audio: Don't register audio device if name isn't given in audio_comp_initialize Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Fixes some issues with the implementation of the balance functionality. In function "wm8904_hw_reset" the priv->balance is initialized with b16HALF, indicating a range from 0 to b16ONE. In function "wm8904_setvolume" the assumed range for priv->balance is between 0 and 1000. The changes now make this consistent for 0 to b16ONE-1. Furthermore, in wm8904_configure the change of balance was not implemented. Minor fix, function name was wm8994_setvolume instead of wm8904_setvolume. Fixed source code format errors. Revert "mm_heap: heapsize align with MM_MIN_CHUNK." This reverts commit 69e69740b5f578e035befc762538b282d91ed1ba. mm_initialize: malloc() return aligend pointer. malloc() should return aligned (with MM_MIN_CHUNK) pointer, but pr #5906 destroy that, this pr find a better method to solve these questions. Signed-off-by: YAMAMOTO Takashi <yamamoto@midokura.com> and Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> arch/riscv: Add mtimer driver Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/note: include-able from C++ files Signed-off-by: chao.an <anchao@xiaomi.com> drivers/sensors: Add new driver for scd41 sensor module Add Sensirion's SCD41 CO2, temperature and humidity sensor driver. drivers/sensors/scd30: Fix invalid parameter check Fix invalid parameter check and redundant conditions. drivers/sensors/sgp30: Fix redundant parameter check Fix redundant conditions. littelfs: deal with block devices w/o ioctl Note: Some block devices has ioctl == NULL. eg. drivers/loop netdb/lib_dnsaddserver.c: Do not insert the duplicate DNS address Signed-off-by: songlinzhang <songlinzhang@xiaomi.com> graphics/nxterm: Avoid accessing freed memory Fix accessing freed priv data. drivers/syslog: update description if Kconfig Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> libc/lib_localtime:fix deadcode isdst always is false Signed-off-by: anjiahao <anjiahao@xiaomi.com> RISC-V: Combine 3 variables that depend on CPU amount into one IRQ_NSTACKS, ARCH_CPU_COUNT, CONFIG_SMP_NCPUS all relate to each other. However, a bit of clean up can be done and everything can be merged into SMP_NCPUS. The MPFS bootloader case works also as it requires only 1 IRQ stack for the hart that executes as bootloader. RISC-V: Remove riscv_cpuindex.c from platforms that don't need it riscv_mhartid is no longer called by exception_common, so can remove this file from platforms that don't need it. Also fixes make warning: Makefile:123: target 'riscv_cpuindex.o' given more than once in the same rule RISC-V: Add setintstack for k210 and qemu This fixes CI issue, and I think the old implementation with SMP shared 1 IRQ stack for multiple CPUs. sched/init: drivers_initialize() should be late than up_initialize() up_initialize | ->up_serialinit | ->uart_register /* ("/dev/console", &CONSOLE_DEV); */ drivers_initialize | ->syslog_console_init | ->register_driver /* ("/dev/console", &g_consoleops, 0666, NULL); */ Signed-off-by: chao.an <anchao@xiaomi.com> arch: cxd56xx: update loader and gnssfw version Update loader and gnssfw to version 2.2.20585 cxd56xx/cxd56_emmc.c: Fix compile warning Add necessary include header named debug.h for using ferr and finfo. arch: cxd56xx: Fix critical section in scu driver Add critical section to scu one-shot sequencer. boards: cxd56xx: Fix an issue i2c tool not working It caused i2c tool not to work due to i2c uninitializing processing. Since this process is not necessary in the normal case, we will move it to the error case. boards: cxd56xx: Make board_late_initialize a weak function Add a weak_function to the board_late_initialize function so that it can be replaced by another file, such as a user application. board/spresense: Add pin selection of ILI934x Add Kconfig choice for selecting RST and DC pins on ILI934x LCD. boards: cxd56xx: Add board function for scd41 sensor driver Add board function for SCD41 CO2, temperature and humidity sensor driver. cxd56/spresense: Add callback mechanism to notice SDCard injection Add a mechanism to callback to an application to notice the SDCard status is changed (inserted or ejected). .github/gcc.json: Fix space/tab inconsistency sim: bt: Add specific bluetooth HCI number id Add option for attached the local bluetooth device use specific bluetooth HCI number id. Signed-off-by: Lingao Meng <menglingao@xiaomi.com> lib_localtime:fix unsigned compare with zero Signed-off-by: anjiahao <anjiahao@xiaomi.com> arch/risc-v: Apply common mtime driver to mtime based chps Signed-off-by: Huang Qi <huangqi3@xiaomi.com> risc-v/c906: fix build break chip/c906_timerisr.c: In function 'up_timer_initialize': Error: chip/c906_timerisr.c:71:3: error: implicit declaration of function 'DEBUGASSERT' [-Werror=implicit-function-declaration] DEBUGASSERT(lower); ^~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: chao.an <anchao@xiaomi.com> libc/lib_glob:use strlcpy instead of memcpy Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/net:use strlcpy instead of strncpy Signed-off-by: anjiahao <anjiahao@xiaomi.com> arch/risc-v: Add missing DMB to mtimer / setmtimecmp The memory mapped mtimecmp lives in I/O space so must add barrier to make sure the value sticks. Otherwise a new IRQ might fire at once. arch/risc-v: Apply misaligned access handler for k210/bl602 Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/riscv: Move toolchain config to arch/risc-v/Kconfig like xtensa Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> riscv/riscv_schedulesigaction.c: Remove the duplicate state saving. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch/arm: Move FPU initialization to common place Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/stack_color: correct the end address of stack color The different optimization of compilers will cause ambiguity in obtaining sp through up_getsp() in arm_stack_color(), if compile with clang and enable the optimization flag (-Ofast), up_getsp() call will be earlier than push {r0-r9,lr}, the end address of color stack will overlap with saved registers. Compile line: clang --target=arm-none-eabi -c "-Ofast" -fno-builtin -march=armv8.1-m.main+mve.fp+fp.dp \ -mtune=cortex-m55 -mthumb -mfpu=fpv5-d16 -mfloat-abi=hard -D__NuttX__ -common/arm_checkstack.c -o arm_checkstack.o Assembler code: llvm-objdump -aS arm_checkstack.o ------------------------------------ |00000000 <arm_stack_color>: |; start = INT32_ALIGN_UP((uintptr_t)stackbase); | 0: c2 1c adds r2, r0, #3 | 2: 22 f0 03 02 bic r2, r2, #3 |; end = nbytes ? INT32_ALIGN_DOWN((uintptr_t)stackbase + nbytes) : | 6: 19 b1 cbz r1, 0x10 <arm_stack_color+0x10> @ imm = #6 | 8: 08 44 add r0, r1 | a: 20 f0 03 00 bic r0, r0, #3 | e: 00 e0 b 0x12 <arm_stack_color+0x12> @ imm = #0 |; __asm__ | 10: 68 46 mov r0, sp <--- fetch the sp before push {r7 lr} | 12: 80 b5 push {r7, lr} <--- sp changed |; nwords = (end - start) >> 2; | 14: 80 1a subs r0, r0, r2 | 16: 80 08 lsrs r0, r0, #2 |; } | 18: 08 bf it eq | 1a: 80 bd popeq {r7, pc} | 1c: 4b f6 ef 63 movw r3, #48879 | 20: cd f6 ad 63 movt r3, #57005 | 24: a0 ee 10 3b vdup.32 q0, r3 |; while (nwords-- > 0) | 28: 20 f0 01 e0 dlstp.32 lr, r0 |; *ptr++ = STACK_COLOR; <--- overwrite | 2c: a2 ec 04 1f vstrw.32 q0, [r2], #16 | 30: 1f f0 05 c0 letp lr, 0x2c <arm_stack_color+0x2c> @ imm = #-8 |; } | 34: 80 bd pop {r7, pc} ------------------------------------ Signed-off-by: chao.an <anchao@xiaomi.com> arm/armv8-m: indicating no low-overhead-loop predication by default Fix usage fault on clang version 13.0.0 (-Ofast): ------------------------------------------------------------------ | arm_hardfault: Hard Fault escalation: | arm_usagefault: PANIC!!! Usage Fault: | arm_usagefault: IRQ: 3 regs: 0x3c58c510 | arm_usagefault: BASEPRI: 00000080 PRIMASK: 00000000 IPSR: 00000003 CONTROL: 00000004 | arm_usagefault: CFSR: 00020000 HFSR: 40000000 DFSR: 00000000 BFAR: 01608050 AFSR: 00000000 | arm_usagefault: Usage Fault Reason: | arm_usagefault: Invalid state | up_assert: Assertion failed at file:armv8-m/arm_usagefault.c line: 113 task: lpwork | backtrace: | [ 2] [<0x2c58124a>] up_backtrace+0xa/0x2e2 | [ 2] [<0x2c56f7cc>] sched_dumpstack+0x28/0x66 | [ 2] [<0x2c580cd0>] up_assert+0x62/0x254 | [ 2] [<0x2c56ab8a>] _assert+0/0xa | [ 2] [<0x2c55575a>] nxsched_add_prioritized+0x38/0xa2 | [ 2] [<0x2c555894>] nxsched_add_blocked+0x2e/0x44 | [ 2] [<0x2c580748>] up_block_task+0x2a/0x96 | [ 2] [<0x2c5569ea>] nxsem_wait+0x64/0xb4 | [ 2] [<0x2c556a40>] nxsem_wait_uninterruptible+0x6/0x10 | [ 2] [<0x2c559b9a>] work_thread+0x1c/0x48 ------------------------------------------------------------------- usage fault on 0x2c55575a: ------------------------------------ |2c555722 <nxsched_add_prioritized>: |; { |2c555722: 80 b5 push {r7, lr} |... |2c55575a: 2f f0 17 c0 le 0x2c555732 <nxsched_add_prioritized+0x10> @ imm = #-44 |... ------------------------------------ Arm v8-M Architecture Reference Manual: C2.4.103 LE, LETP B3.28 Low overhead loops: An INVSTATE UsageFault is raised if a LE instruction is executed and FPSCR.LTPSIZE does not read as four. When a new floating-point context is created and FPCCR.ASPEN is set to zero it is the responsibility of software to correctly initialize FPSCR.LTPSIZE. Signed-off-by: chao.an <anchao@xiaomi.com> fs/vfs/fs_truncate.c: Use ioctl to truncate on non-mountpoint inode Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae> libc/time: add strptime porting support lib_strptime.c copies from android bionic/libc/tzcode. Signed-off-by: liuhaitao <liuhaitao@xiaomi.com> Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/strptime:_conv_num skip space Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/strptime: fix warning unused-value warning: value computed is not used [-Wunused-value] Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/lib_strptime:change code format & add notes Signed-off-by: anjiahao <anjiahao@xiaomi.com> RISC-V: Move mhartid to own assembly macro+function Hartid and cpuindex are not the same thing. Hartid is needed regardless of SMP, for external interrupt handling etc. SMP needs cpuindex which might not be index == hartid, so both are needed. IMO it is clearer to provide separate API for both. Currently the implementation of up_cpu_index is done a bit lazily, because it assumes hartid == cpu index, but this is not 100% accurate, so it is still missing some logic. arch/risc-v/riscv_misaligned: Correct sw source register If source register of sw instruction is x0, we must point it to a constant zero since in NuttX's context, value of index 0 is EPC. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/risc-v: Correct format of 32-bit insn in misaligned handler FIx: Format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int') Signed-off-by: Huang Qi <huangqi3@xiaomi.com> power/governor: Remove the duplicated function prototype since they are declared include/nuttx/power/pm.h by: commit 5ce181e6b702cedbd79790fbe40aab7d29dae7c0 Author: zhuyanlin <zhuyanlin1@xiaomi.com> Date: Mon Feb 14 15:32:40 2022 +0800 power:govorner: add govorner to per domain. For mult domains scene,, activity and greety can be used at same time. Let user to select domain governor. Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> and add static const to g_pmgovernor Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> drivers/power: Remove activity_governor.h and greedy_governor.h since they aren't really used anymore Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> MPFS: Fix mtimecmp address MTIMECMP0 was incorrect MPFS: Use riscv_exception_attach like the others do Exception / fault handling goes to unexpected ISR, fix by setting the common ISR handlers like all other RISC-V platforms do. arch: Fix compile error when enabling CONFIG_DUMP_ON_EXIT "error: incompatible types when assigning to type 'struct filelist *' from type 'struct filelist' filelist = tcb->group->tg_filelist;" Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch: Move the DUMP_ON_EXIT logic after nxtask_exit. Otherwise we will try to dump the state of the current task, however the exit handler has already started doing some cleanup and invalidated its group. Accessing the group from dumponexit will crash. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch/Kconfig: Move the DUMP_ON_EXIT option out of the Bring-up group. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> sched/pthread_create:fix bug,delete data_sem if a pthread set attr is detach,and when call pthread_create, new thread exit quikly,new thread's tcb be free,then pthread_create use new thread's tcb will crash. Signed-off-by: anjiahao <anjiahao@xiaomi.com> rpmsg_usrsock: Support the wireless ioctl which contain pointer 1/2 Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com> fix: usrsock iovec_do skip empty iov Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com> sched/environ: Ensure tg_envp terminated by double '\0' so we can compute the whole environ string length from it Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> RISC-V: Add SBI glue logic Currently only stubs for mtime handling added, with a gentle reminder that the actual implementation is still missing. RISC-V: mtimer register via SBI when S-mode is in use Cannot access the memory mapped registers directly when the kernel runs in S-mode, must forward the access to SBI. arch/[arm|sparc]: replace INT32_ALIGN_* to STACK_ALIGN_* Signed-off-by: chao.an <anchao@xiaomi.com> arch/stack_color: correct the stack top of running task This PR to ensure the stack pointer is locate to the stack top Signed-off-by: chao.an <anchao@xiaomi.com> arm/rtl8720c: Remove up_getsp which is already implemented in arch/arm/arch.h Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> MPFS: Set correct interrupt per mode (M-/S-mode) for mtimer libc/string: Use Byte-Shift algorithm for very long needles Reference here: https://github.com/taleinat/byteshift_strstr Signed-off-by: chao.an <anchao@xiaomi.com> Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/string:delete small to big endian marco avoid byte alignment Signed-off-by: haopengxiang <haopengxiang@xiaomi.com> Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/string:add LICENSE info Signed-off-by: anjiahao <anjiahao@xiaomi.com> Add SPIRAM to ESP32-S2 driver/mmcsdio: do not hold the semaphore on interrupt context so we can do the full dump to mmc/sd card in the panic case Signed-off-by: chao.an <anchao@xiaomi.com> driver/mmcsdio: do not hold the semaphore in idle thread too Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> fs/fcntl: add O_APPEND flag judge in fcntl Signed-off-by: liuhaitao <liuhaitao@xiaomi.com> vfs/fcntl: Minor style fix Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arm/armv7-[a|r]: move fpu save/restore to assembly handler Save/Restore FPU registers in C environment is dangerous practive, which cannot guarantee the compiler won't generate the assembly code with float point registers, especially in interrupt handling Signed-off-by: chao.an <anchao@xiaomi.com> arch/arm/src/sam34/sam_hsmci.c: delay required after sending command arch/arm/src/sam34/sam_hsmci.c: DMA setup before write is required arch/arm/src/sam34/sam_hsmci: DMA also present on SAM3X chips arch/arm/src/sam34/sam_hsmci.c: SAM3X GPIO setup arch/arm/src/sam34/Kconfig: fix typo in device name boards/arm/a1x: Remove the check CONFIG_ARCH_FPU around arm_fpuconfig forget in below change: commit df5a8a53ae92606e2d65149c6b5159b82dfc5d76 Author: Xiang Xiao <xiaoxiang@xiaomi.com> Date: Tue Apr 12 03:18:46 2022 +0800 arch/arm: Move FPU initialization to common place Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> boards/esp32_twai: Remove arm_arch.h from comment Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> drivers: remove unimplemented open/close/ioctl interfaces Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/risc-v: Use fs status definition from csr.h Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/riscv/esp32c3: esp32c3_twai.h TWAI (CAN) controller registers provided by Espressif. File provided by Abdelatif Guettouche Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com> arch/riscv/esp32c3: ESP32C3 TWAI (CAN) controller driver. Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com> arch/riscv/esp32c3: ESP32C3 TWAI (CAN) controller included into Kconfig. Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com> boards/risc-v/esp32c3: ESP32C3 TWAI (CAN) controller bringup for DevKitM-1. Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com> boards/risc-v/esp32c3: ESP32C3 TWAI (CAN) controller config for DevKitM-1. Signed-off-by: Jan Charvat <jancharvat.charvat@gmail.com> Fixed a compile error, presumably caused by C&P error. arch/armv[7|8]m: enhance the clang support Signed-off-by: chao.an <anchao@xiaomi.com> arch/Toolchain.defs: replace all ${/$} with $(/$) Signed-off-by: chao.an <anchao@xiaomi.com> semaphore: fix usage of NXSEM_INITIALIZER Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> arch/xtensa: Remove FAR from chip and board folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/ceva: Remove FAR from chip folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/sim: Remove FAR from chip and board folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/x86_64: Remove FAR from chip folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/or1k: Remove FAR from chip folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/misoc: Remove FAR from chip folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/mips: Remove FAR from chip and board folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/sparc: Remove FAR from chip and board folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arm/arch: using __builtin_frame_address(0) implement up_getsp(). Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> arch/arm: Move arm_signal_dispatch.c to common folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Remove the unneeded worker_t cast Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Remove the unneeded void cast Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arm/a1x: fix compile break Signed-off-by: chao.an <anchao@xiaomi.com> wireless/80211: update the 80211 header Upstream from: https://github.com/freebsd/freebsd-src/blob/main/sys/net80211/ieee80211.h Signed-off-by: chao.an <anchao@xiaomi.com> sched/environ: Refine the environment variables storage layout to confirm the standard and then implement get_environ_ptr correctly Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc: Don't duplicate string in chdir and lib_restoredir since the new layout doesn't reallocate the unchanged environ variable anymore Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> tools/cibuild.sh: Migrate risc-v toolchian from 8.3.0 to 10.2.0 Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> tools/cibuild.sh: Download risc-v toolchain with --no-check-certificate untils SiFive update their certification Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/arm: export arm_saveusercontext() rename arm_saveusercontext() -> up_arm_saveusercontext() Signed-off-by: chao.an <anchao@xiaomi.com> boards/ostest: remove board ostest implement Signed-off-by: chao.an <anchao@xiaomi.com> board/arch_fpu*: move arch_[get|cmp]fpu to common arch rename the arch api: arch_getfpu -> up_saveusercontext arch_cmpfpu -> up_cmpfpu Signed-off-by: chao.an <anchao@xiaomi.com> arch/mips: Remove unneeded group_addrenv call which handled by mips_doirq Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/misoc: Remove unneeded group_addrenv call which handled by [lm32|minerva]_doirq Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/xtensa: Remove unneeded group_addrenv call which handled by xtensa_irq_dispatch Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/sparc: Remove unneeded group_addrenv call which handled by up_doirq Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc/blockstream: add block out stream backend Signed-off-by: chao.an <anchao@xiaomi.com> libc/blkoutstream: Minor style fix Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/arm: Remove unneeded group_addrenv call which handled by arm_doirq Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/risc-v: Remove FAR from chip and board folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/arm: Remove FAR and CODE from common/ and arm*/ folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> Revert "tools/cibuild.sh: Download risc-v toolchain with --no-check-certificate" This reverts commit 3b97e37b525d50d8a78765f85276f900129dade5. arch/arm: Remove all lazy fpu related code since it is broken and inefficient, and then removed by: commit dc961baaea17107109d94575e9bb5d9fb725b801 Author: chao.an <anchao@xiaomi.com> Date: Thu Apr 14 18:07:14 2022 +0800 arm/armv7-[a|r]: move fpu save/restore to assembly handler Save/Restore FPU registers in C environment is dangerous practive, which cannot guarantee the compiler won't generate the assembly code with float point registers, especially in interrupt handling Signed-off-by: chao.an <anchao@xiaomi.com> commit 8d66dbc0680cb81f91674ace814b2b8a94c49cd2 Author: chao.an <anchao@xiaomi.com> Date: Thu Apr 7 13:48:04 2022 +0800 arm/armv[7|8]-m: skip the fpu save/restore if stack frame is integer-only Signed-off-by: chao.an <anchao@xiaomi.com> Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/armv[7|8]-m: Compare all FPU registers in up_fpucmp Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/armv7-[a|r]: correct the handing of group env switch This PR resolved 2 issues: 1. CURRENT_REGS is not set correctly on swint handling 2. group env is not changed properly Signed-off-by: chao.an <anchao@xiaomi.com> fs:oflag need consistent with psock if don't consistent with psock,call fcntl will have differet flag Signed-off-by: anjiahao <anjiahao@xiaomi.com> arm/arm_assert.c Fix dumping of status from ISR The status dump did not work if the first fault triggers before the first context switch (during nx_start()). risc-v/riscv_assert.c Fix dumping of status from ISR The status dump did not work if the first fault triggers before the first context switch (during nx_start()). fs:fs_getfilep changes fd judgment method if a fd was closed,need return EBADF Signed-off-by: anjiahao <anjiahao@xiaomi.com> arch/armv8-m: Unify the toolchain definition of eabi/clang for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/armv7-m: Unify the toolchain definition of eabi/clang/iar for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/arm/armv6-m: Unify the toolchain definition of eabi for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/armv7-a/r: Unify the toolchain definition of eabi for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/risc-v: Unify the toolchain definition of RVG for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/misoc: Unify the toolchain definition of GNU for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> arch/z80: Unify the toolchain definition of SDCC for linux and windows Signed-off-by: chao.an <anchao@xiaomi.com> armv7/r:cp15_cache_all: fix error in LineSize 'r5' mask r5 = r3 & r1 Signed-off-by: zhuyanlin <zhuyanlin1@xiaomi.com> arch/sparc,xtensa: Control output by $(Q) as other arch Signed-off-by: Huang Qi <huangqi3@xiaomi.com> LICENSE: document missing armv7-x files add missing armv7-a/armv7-r files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing lpc files add missing lpc files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing samdxxx files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing am335x files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: cxd56xx: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: imxrt: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: lpc43xx: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: phy62xx: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: stm32l4: remove empty files during contribution empty files have been pushed. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing tiva files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: mor1kx: remove empty files during contribution empty files have been pushed. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing mor1k files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: sama5: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch: arm: stm32: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> boards: sim: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> drivers: leds: ncp5623c: migrate the license to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing mtd files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> drivers: mtd: gd5f: migrate the license to Apache Xiaomi has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> drivers: sensors: mlx90614: migrate the license to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing bcm43xxx files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing nfs files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> include: himem: Add Apache license to files In the initial contribution those files were missing the license Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> include: leds: ncp5623c: migrate the license to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing uIP files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing bluetooth files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> include: wireless: bluetooth: migrate the license to Apache Gregory Nutt is the copyright holder for those files and he has submitted the SGA as a result we can migrate the licenses to Apache. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing sixlowpan files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing igmp files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing wireless files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> LICENSE: document missing libc files add missing files to the LICENSE file. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> arch/risc-v: Change riscv_savefpu/riscv_loadfpu to macro Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch/armv6-m: add support of LLVM Clang Signed-off-by: chao.an <anchao@xiaomi.com> arch/clang: add support for Clang LTO add support of Clang's Link Time Optimization (LTO) on NuttX build system Reference: https://gcc.gnu.org/onlinedocs/gccint/LTO-Overview.html https://llvm.org/docs/LinkTimeOptimization.html Signed-off-by: chao.an <anchao@xiaomi.com> arch/xtensa: Use syscall interface for xtensa_save/restore_context. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch.h: Fix up_exit prototype. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch/xtensa: Move xtensa_save_context to up_saveusercontext for consistency with other archs. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arm/armv[7|8]m: compare of hardware fp registers should skip REG_FP_RESERVED Fix fpu test break Signed-off-by: chao.an <anchao@xiaomi.com> arch/risc-v: Don't clear reserved bits in fcsr in riscv_fpuconfig Signed-off-by: Huang Qi <huangqi3@xiaomi.com> pipe: Increase buffer size by one byte to ompensate the full indicator Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> boards/sim: support rc.sysinit Follow: http://glennastory.net/boot/sysinit.html This is first script that init runs is rc.sysinit. This script does serval initialization tasks about basic service. The boot sequence currently provided to the board level is: board_earlyinitialize-> board_lateinitialize(Peripherals driver, core driver, ...)-> run rcS script(mount fs, run service) -> board_appinitialize-> After this patch: The boot sequence currently provided to the board level is: board_earlyinitialize-> board_lateinitialize(core driver,...)-> run rc.sysinit script(mount fs, run core service) -> board_appinitialize(Peripherals driver)-> run rcS script(run other service)-> So, Peripheral drivers can do more with the file system and core services. Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com> arch/arm: Switch the context of save and restore from assembler to c Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/arm: Move the duplicated assembly code to common folder Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> binfmt_execmodule: add errout_with_args exit point Ensures that when errout_xx is taken, args are freed env_dup: Fix copying of env between address environments If address environments are in use, it is not possible to simply memcpy from from one process to another. The current implementation of env_dup does precisely this and thus, it fails at once when it is attempted between two user processes. The solution is to use the kernel's heap as an intermediate buffer. This is a simple, effective and common way to do a fork(). Obviously this is not needed for kernel processes. syscall: Add call gate for get_environ_ptr Now that the environment strings are stored as an array of strings, they can be passed from the application via char **environ, which is really defined as a function call to get_environ_ptr(). This works as is for flat build, but protected mode and kernel mode require a call gate, which is added here. binfmt_execmodule: If incoming envp is NULL get parent envp This keeps backwards compatibility with apps that do not provide envp. The old implementation passes NULL always and this change fixes any regression caused by it. assert: static_assert is not support in c standard C89,C99. Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> arch/xtensa: Color the other CPUs task when they are created. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> compile/opt: add config DEBUG_OPT_UNUSED_SECTIONS Enable this option to optimization the unused input sections with the linker by compiling with " -ffunction-sections -fdata-sections ", and linking with " --gc-sections ". Signed-off-by: chao.an <anchao@xiaomi.com> compile/opt: add config DEBUG_LINK_MAP Selecting this option will pass "-Map=$(TOPDIR)$(DELIM)nuttx.map" to ld when linking NuttX ELF. That file can be useful for verifying and debugging magic section games, and for seeing which pieces of code get eliminated with DEBUG_OPT_UNUSED_SECTIONS. Signed-off-by: chao.an <anchao@xiaomi.com> arch/risc-v: Enable FPU for K210 K210 support rv64gc ISA, now we enable F/D extension for it. Note: QEMU for K210 don't support FPU now. Signed-off-by: Huang Qi <huangqi3@xiaomi.com> sched/task: Correct the comment about environment variable Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/environ: Remove the unneeded cast in env_dup Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched/environ: Replace get_environ_ptr with environ Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> environ: Don't expose get_environ_ptr in csdlib since it isn't defined in c/c++ standard Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> arch/risc-v/riscv_misaligned: Implement float load/store support Signed-off-by: Huang Qi <huangqi3@xiaomi.com> arch: risc-v: Do not enable FPU for K210 with QEMU Summary: - I noticed that maix-bit:smp does not work with QEMU. - Actually, QEMU supports sifive_u (not K210) but it works if FPU is disabled. - This commit fixes this issue. Impact: - K210 with QEMU only Testing: - Tested with qemu-5.2 Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> sched/task: Implement execle and execve Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc: Implement execvp, execlp and execvpe as macro Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> libc: Fix typo error in execle Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> syscall: Fix prototype of exec() to syscall.csv pm: Move pm_initialize call from driver_initialize to xxx_pminitialize since it's too late with the below commit: ommit a594a5d7a8dcd756884ca7d3449f37ba77f96af3 Author: chao.an <anchao@xiaomi.com> Date: Mon Apr 11 19:44:26 2022 +0800 sched/init: drivers_initialize() should be late than up_initialize() up_initialize | ->up_serialinit | ->uart_register /* ("/dev/console", &CONSOLE_DEV); */ drivers_initialize | ->syslog_console_init | ->register_driver /* ("/dev/console", &g_consoleops, 0666, NULL); */ Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com> sched: remove DEBUGASSERT from nx_waitpid Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> xtensa_user_handler.S: Use the `ps_setup` macro when dealing with an exception. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> xtensa_user_handler.S: Fix backtrace. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> arch/xtensa: No need to save SP in EXCSAVE_1 when linking the interrupt frame with the previous frame. The SP is already saved in A12. Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com> boards/boardctl: correct boarctl return value Summary: - Correct boardctl function's return value - In case of BOARDIOC_TESTSET, `ret' has 0 or 1 or an error, but `ret' is ignored except error. Impact: - boardctl return value except errors Testing: - custom Cortex-A9 board Signed-off-by: Oki Minabe <minabe.oki@gmail.com> libc/string: strcmp/strncmp cast unsigned char Summary: - Cast to unsigned char for strcmp and strncmp - strcmp and strncmp are described following by opengroup.org The sign of a non-zero return value shall be determined by the sign of the difference between the values of the first pair of bytes (both interpreted as type unsigned char) that differ in the strings being compared. https://pubs.opengroup.org/onlinepubs/9699919799/functions/strcmp.html https://pubs.opengroup.org/onlinepubs/9699919799/functions/strncmp.html Impact: - strcmp and strncmp return value Testing: - ostest on sabre-6quad:smp w/ qemu Signed-off-by: Oki Minabe <minabe.oki@gmail.com> compiler.h: optimization option is not supported before GCC 4.6 -fno-tree-loop-distribute-patterns is not supported before GCC 4.6 Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com> libs/libc/string: unify implementation across the functions Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com> tools:fix parsememdump.py match error Signed-off-by: anjiahao <anjiahao@xiaomi.com> libc/fixedmatch: Avoid "divide by zero" error Signed-off-by: Xiang Xiao <xiaoxia…

The free node is still in use after kasan_poison(), the node member access will cause the assert report by kasan. | (gdb) bt | #0 kasan_report (addr=1743265406637584896, size=140737337053680, is_write=46) at kasan/kasan.c:97 | #1 0x0000555555607bdd in __asan_loadN_noabort (addr=140737272831420, size=4) at kasan/kasan.c:289 | #2 0x0000555555607cd7 in __asan_load4_noabort (addr=140737272831420) at kasan/kasan.c:323 | #3 0x00005555556061ef in gmtime_r (timep=0x7ffff3275dbc, result=0x7ffff3275e10) at time/lib_gmtimer.c:301 | #4 0x000055555560e507 in sim_rtc_rdtime (lower=0x55555576b780 <g_sim_rtc>, rtctime=0x7ffff3275e10) at sim/up_rtc.c:77 | #5 0x00005555555fcbdb in up_rtc_gettime (tp=0x7ffff3275ef0) at timers/arch_rtc.c:128 | #6 0x00005555555f08b4 in clock_systime_timespec (ts=0x7ffff3275ef0) at clock/clock_systime_timespec.c:72 | apache#7 0x00005555555ecc77 in note_common (tcb=0x7ffff31d2180, note=0x7ffff3275f80, length=21 '\025', type=18 '\022') at sched/sched_note.c:144 | apache#8 0x00005555555ed706 in sched_note_syscall_enter (nr=1, argc=0) at sched/sched_note.c:765 | apache#9 0x000055555560eb37 in __wrap_getpid () at wraps/WRAP_getpid.c:26 | apache#10 0x0000555555608d1c in mm_takesemaphore (heap=0x7ffff30ae000) at mm_heap/mm_sem.c:127 | apache#11 0x0000555555609477 in mm_free (heap=0x7ffff30ae000, mem=0x7ffff3265b80) at mm_heap/mm_free.c:89 | apache#12 0x00005555556070c5 in free (mem=0x7ffff3265b80) at umm_heap/umm_free.c:49 | apache#13 0x000055555560c3b0 in up_release_stack (dtcb=0x7ffff31e4b00, ttype=0 '\000') at sim/up_releasestack.c:67 | apache#14 0x00005555555f2515 in nxsched_release_tcb (tcb=0x7ffff31e4b00, ttype=0 '\000') at sched/sched_releasetcb.c:134 | apache#15 0x00005555556bdf0c in nxtask_terminate (pid=4, nonblocking=true) at task/task_terminate.c:184 | apache#16 0x00005555556bdb0f in nxtask_exit () at task/task_exit.c:168 | apache#17 0x000055555566e05f in up_exit (status=0) at sim/up_exit.c:64 | apache#18 0x000055555564f454 in _exit (status=0) at task/exit.c:78 | apache#19 0x000055555560ea89 in __wrap__exit (parm1=0) at wraps/WRAP__exit.c:27 | apache#20 0x00005555555eb288 in exit (status=0) at stdlib/lib_exit.c:54 | apache#21 0x00005555555fe2cc in nxtask_startup (entrypt=0x555555670c34 <critmon_start_main>, argc=1, argv=0x7ffff3265bb0) at sched/task_startup.c:70 | apache#22 0x00005555555f02a0 in nxtask_start () at task/task_start.c:134 | apache#23 0x0000000000000000 in ?? () Signed-off-by: chao.an <anchao@xiaomi.com>

The free node is still in use after kasan_poison(), the node member access will cause the assert report by kasan. | (gdb) bt | #0 kasan_report (addr=1743265406637584896, size=140737337053680, is_write=46) at kasan/kasan.c:97 | #1 0x0000555555607bdd in __asan_loadN_noabort (addr=140737272831420, size=4) at kasan/kasan.c:289 | #2 0x0000555555607cd7 in __asan_load4_noabort (addr=140737272831420) at kasan/kasan.c:323 | #3 0x00005555556061ef in gmtime_r (timep=0x7ffff3275dbc, result=0x7ffff3275e10) at time/lib_gmtimer.c:301 | #4 0x000055555560e507 in sim_rtc_rdtime (lower=0x55555576b780 <g_sim_rtc>, rtctime=0x7ffff3275e10) at sim/up_rtc.c:77 | #5 0x00005555555fcbdb in up_rtc_gettime (tp=0x7ffff3275ef0) at timers/arch_rtc.c:128 | #6 0x00005555555f08b4 in clock_systime_timespec (ts=0x7ffff3275ef0) at clock/clock_systime_timespec.c:72 | #7 0x00005555555ecc77 in note_common (tcb=0x7ffff31d2180, note=0x7ffff3275f80, length=21 '\025', type=18 '\022') at sched/sched_note.c:144 | #8 0x00005555555ed706 in sched_note_syscall_enter (nr=1, argc=0) at sched/sched_note.c:765 | #9 0x000055555560eb37 in __wrap_getpid () at wraps/WRAP_getpid.c:26 | #10 0x0000555555608d1c in mm_takesemaphore (heap=0x7ffff30ae000) at mm_heap/mm_sem.c:127 | #11 0x0000555555609477 in mm_free (heap=0x7ffff30ae000, mem=0x7ffff3265b80) at mm_heap/mm_free.c:89 | #12 0x00005555556070c5 in free (mem=0x7ffff3265b80) at umm_heap/umm_free.c:49 | #13 0x000055555560c3b0 in up_release_stack (dtcb=0x7ffff31e4b00, ttype=0 '\000') at sim/up_releasestack.c:67 | #14 0x00005555555f2515 in nxsched_release_tcb (tcb=0x7ffff31e4b00, ttype=0 '\000') at sched/sched_releasetcb.c:134 | #15 0x00005555556bdf0c in nxtask_terminate (pid=4, nonblocking=true) at task/task_terminate.c:184 | #16 0x00005555556bdb0f in nxtask_exit () at task/task_exit.c:168 | #17 0x000055555566e05f in up_exit (status=0) at sim/up_exit.c:64 | #18 0x000055555564f454 in _exit (status=0) at task/exit.c:78 | #19 0x000055555560ea89 in __wrap__exit (parm1=0) at wraps/WRAP__exit.c:27 | #20 0x00005555555eb288 in exit (status=0) at stdlib/lib_exit.c:54 | #21 0x00005555555fe2cc in nxtask_startup (entrypt=0x555555670c34 <critmon_start_main>, argc=1, argv=0x7ffff3265bb0) at sched/task_startup.c:70 | #22 0x00005555555f02a0 in nxtask_start () at task/task_start.c:134 | #23 0x0000000000000000 in ?? () Signed-off-by: chao.an <anchao@xiaomi.com>

The free node is still in use after kasan_poison(), the node member access will cause the assert report by kasan. | (gdb) bt | #0 kasan_report (addr=1743265406637584896, size=140737337053680, is_write=46) at kasan/kasan.c:97 | apache#1 0x0000555555607bdd in __asan_loadN_noabort (addr=140737272831420, size=4) at kasan/kasan.c:289 | apache#2 0x0000555555607cd7 in __asan_load4_noabort (addr=140737272831420) at kasan/kasan.c:323 | apache#3 0x00005555556061ef in gmtime_r (timep=0x7ffff3275dbc, result=0x7ffff3275e10) at time/lib_gmtimer.c:301 | apache#4 0x000055555560e507 in sim_rtc_rdtime (lower=0x55555576b780 <g_sim_rtc>, rtctime=0x7ffff3275e10) at sim/up_rtc.c:77 | apache#5 0x00005555555fcbdb in up_rtc_gettime (tp=0x7ffff3275ef0) at timers/arch_rtc.c:128 | apache#6 0x00005555555f08b4 in clock_systime_timespec (ts=0x7ffff3275ef0) at clock/clock_systime_timespec.c:72 | apache#7 0x00005555555ecc77 in note_common (tcb=0x7ffff31d2180, note=0x7ffff3275f80, length=21 '\025', type=18 '\022') at sched/sched_note.c:144 | apache#8 0x00005555555ed706 in sched_note_syscall_enter (nr=1, argc=0) at sched/sched_note.c:765 | apache#9 0x000055555560eb37 in __wrap_getpid () at wraps/WRAP_getpid.c:26 | apache#10 0x0000555555608d1c in mm_takesemaphore (heap=0x7ffff30ae000) at mm_heap/mm_sem.c:127 | apache#11 0x0000555555609477 in mm_free (heap=0x7ffff30ae000, mem=0x7ffff3265b80) at mm_heap/mm_free.c:89 | apache#12 0x00005555556070c5 in free (mem=0x7ffff3265b80) at umm_heap/umm_free.c:49 | apache#13 0x000055555560c3b0 in up_release_stack (dtcb=0x7ffff31e4b00, ttype=0 '\000') at sim/up_releasestack.c:67 | apache#14 0x00005555555f2515 in nxsched_release_tcb (tcb=0x7ffff31e4b00, ttype=0 '\000') at sched/sched_releasetcb.c:134 | apache#15 0x00005555556bdf0c in nxtask_terminate (pid=4, nonblocking=true) at task/task_terminate.c:184 | apache#16 0x00005555556bdb0f in nxtask_exit () at task/task_exit.c:168 | apache#17 0x000055555566e05f in up_exit (status=0) at sim/up_exit.c:64 | apache#18 0x000055555564f454 in _exit (status=0) at task/exit.c:78 | apache#19 0x000055555560ea89 in __wrap__exit (parm1=0) at wraps/WRAP__exit.c:27 | apache#20 0x00005555555eb288 in exit (status=0) at stdlib/lib_exit.c:54 | apache#21 0x00005555555fe2cc in nxtask_startup (entrypt=0x555555670c34 <critmon_start_main>, argc=1, argv=0x7ffff3265bb0) at sched/task_startup.c:70 | apache#22 0x00005555555f02a0 in nxtask_start () at task/task_start.c:134 | apache#23 0x0000000000000000 in ?? () Signed-off-by: chao.an <anchao@xiaomi.com>

apps/examples/usrsocktest/usrsocktest_basic_daemon.c: 321 static void basic_daemon_dup2(FAR struct usrsocktest_daemon_conf_s *dconf) 322 { ... 335 ret = dup2(sd2, sd); 352 } Usrsocktest Task hold the file group lock and send the close request to usrsock deamon : | #0 net_lockedwait_uninterruptible (sem=0x5555555f8ba2 <g_usrsockdev+34>) at utils/net_lock.c:427 | #1 0x000055555557489c in usrsockdev_do_request (conn=0x5555555f8800 <g_usrsock_connections>, iov=0x7ffff3f36040, iovcnt=1) at usrsock/usrsock_dev.c:1185 | --> send close request to usrsock deamon | | #2 0x00005555555d0439 in do_close_request (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:109 | #3 0x00005555555d04f5 in usrsock_close (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:157 | #4 0x00005555555cf100 in usrsock_sockif_close (psock=0x7ffff3ea4a60) at usrsock/usrsock_sockif.c:234 | #5 0x00005555555c7b2f in psock_close (psock=0x7ffff3ea4a60) at socket/net_close.c:102 | #6 0x000055555557a518 in sock_file_close (filep=0x7ffff3f253d0) at socket/socket.c:115 | apache#7 0x000055555557678f in file_close (filep=0x7ffff3f253d0) at vfs/fs_close.c:74 | apache#8 0x000055555557694c in file_dup2 (filep1=0x7ffff3f253e8, filep2=0x7ffff3f253d0) at vfs/fs_dup2.c:129 | ---> hold group file list lock ( _files_semtake(list) ) | | apache#9 0x0000555555575aab in nx_dup2 (fd1=7, fd2=6) at inode/fs_files.c:451 | apache#10 0x0000555555575af3 in dup2 (fd1=7, fd2=6) at inode/fs_files.c:473 | apache#11 0x000055555559d937 in basic_daemon_dup2 (dconf=0x5555555f8d80 <usrsocktest_daemon_config>) at usrsocktest_basic_daemon.c:335 | apache#12 0x000055555559ed80 in usrsocktest_test_basic_daemon_basic_daemon_dup2 () at usrsocktest_basic_daemon.c:612 | apache#13 0x000055555559f18d in usrsocktest_group_basic_daemon_run () at usrsocktest_basic_daemon.c:666 | apache#14 0x0000555555599f8d in run_tests (name=0x5555555dc8c3 "basic_daemon", test_fn=0x55555559ef50 <usrsocktest_group_basic_daemon_run>) at usrsocktest_main.c:117 | apache#15 0x000055555559a06c in run_all_tests () at usrsocktest_main.c:154 | apache#16 0x000055555559a3d1 in usrsocktest_main (argc=1, argv=0x7ffff3f25450) at usrsocktest_main.c:248 | apache#17 0x000055555555cad8 in nxtask_startup (entrypt=0x55555559a357 <usrsocktest_main>, argc=1, argv=0x7ffff3f25450) at sched/task_startup.c:70 | apache#18 0x0000555555559938 in nxtask_start () at task/task_start.c:134 Usrsock Deamon weakup and setup the poll want to perform close request, but locked on fs_getfilep(): | #0 _files_semtake (list=0x7ffff3f250b8) at inode/fs_files.c:51 | --> Request group lock but which hold by close request, deadlock | #1 0x00005555555758b1 in fs_getfilep (fd=5, filep=0x7ffff3f47190) at inode/fs_files.c:375 | #2 0x00005555555d3064 in poll_fdsetup (fd=5, fds=0x7ffff3f47290, setup=true) at vfs/fs_poll.c:79 | #3 0x00005555555d3243 in poll_setup (fds=0x7ffff3f47290, nfds=2, sem=0x7ffff3f47206) at vfs/fs_poll.c:139 | #4 0x00005555555d39a6 in nx_poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:383 | #5 0x00005555555d3abd in poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:501 | --> daemon weak up | #6 0x00005555555c62c7 in usrsocktest_daemon (param=0x5555555f5360 <g_ub_daemon>) at usrsocktest_daemon.c:1846 | apache#7 0x000055555559161e in pthread_startup (entry=0x5555555c60d3 <usrsocktest_daemon>, arg=0x5555555f5360 <g_ub_daemon>) at pthread/pthread_create.c:59 | apache#8 0x00005555555d45f0 in pthread_start () at pthread/pthread_create.c:175 | apache#9 0x0000000000000000 in ?? () Signed-off-by: chao an <anchao@xiaomi.com>

==2117790==ERROR: AddressSanitizer: global-buffer-overflow on address 0x64d9e3c0 at pc 0x59ac4e16 bp 0xcefe8058 sp 0xcefe8048 READ of size 1 at 0x64d9e3c0 thread T0 #0 0x59ac4e15 in up_nputs sim/up_nputs.c:54 #1 0x59a67e4c in syslog_default_write syslog/syslog_channel.c:220 #2 0x59a67823 in syslog_default_write syslog/syslog_write.c:101 apache#3 0x59a67f10 in syslog_write syslog/syslog_write.c:153 apache#4 0x59a651c3 in syslogstream_flush syslog/syslog_stream.c:60 apache#5 0x59a6564e in syslogstream_addchar syslog/syslog_stream.c:104 apache#6 0x59a6576f in syslogstream_putc syslog/syslog_stream.c:140 apache#7 0x5989fc4d in vsprintf_internal stdio/lib_libvsprintf.c:952 apache#8 0x598a1298 in lib_vsprintf stdio/lib_libvsprintf.c:1379 apache#9 0x59a64ea4 in nx_vsyslog syslog/vsyslog.c:223 apache#10 0x598a601a in vsyslog syslog/lib_syslog.c:68 apache#11 0x59b0e3dc in AIOTJS::logPrintf(int, char const*, ...) src/ajs_log.cpp:45 apache#12 0x59b03d56 in jse_dump_obj src/jse/quickjs/jse_quickjs.cpp:569 apache#13 0x59b03ea1 in jse_dump_error1(JSContext*, unsigned long long) src/jse/quickjs/jse_quickjs.cpp:602 apache#14 0x59b03dd9 in jse_dump_error(JSContext*) src/jse/quickjs/jse_quickjs.cpp:591 apache#15 0x59bed615 in ferry::DomComponent::callHook(char const*) src/framework/dom/component.cpp:65 apache#16 0x59bfe0ff in ferry::DomComponent::initialize() src/framework/dom/component.cpp:645 apache#17 0x59bb141d in dom_create_component(JSContext*, unsigned long long, unsigned long long, unsigned long long) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x365c41d) apache#18 0x59b4c0d3 in AIOTJS::__createComponent(JSContext*, unsigned long long, int, unsigned long long*) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x35f70d3) apache#19 0x5a56ec17 in js_call_c_function quickjs/quickjs.c:16108 Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>

apps/examples/usrsocktest/usrsocktest_basic_daemon.c: 321 static void basic_daemon_dup2(FAR struct usrsocktest_daemon_conf_s *dconf) 322 { ... 335 ret = dup2(sd2, sd); 352 } Usrsocktest Task hold the file group lock and send the close request to usrsock deamon : | #0 net_lockedwait_uninterruptible (sem=0x5555555f8ba2 <g_usrsockdev+34>) at utils/net_lock.c:427 | #1 0x000055555557489c in usrsockdev_do_request (conn=0x5555555f8800 <g_usrsock_connections>, iov=0x7ffff3f36040, iovcnt=1) at usrsock/usrsock_dev.c:1185 | --> send close request to usrsock deamon | | #2 0x00005555555d0439 in do_close_request (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:109 | #3 0x00005555555d04f5 in usrsock_close (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:157 | #4 0x00005555555cf100 in usrsock_sockif_close (psock=0x7ffff3ea4a60) at usrsock/usrsock_sockif.c:234 | #5 0x00005555555c7b2f in psock_close (psock=0x7ffff3ea4a60) at socket/net_close.c:102 | #6 0x000055555557a518 in sock_file_close (filep=0x7ffff3f253d0) at socket/socket.c:115 | apache#7 0x000055555557678f in file_close (filep=0x7ffff3f253d0) at vfs/fs_close.c:74 | apache#8 0x000055555557694c in file_dup2 (filep1=0x7ffff3f253e8, filep2=0x7ffff3f253d0) at vfs/fs_dup2.c:129 | ---> hold group file list lock ( _files_semtake(list) ) | | apache#9 0x0000555555575aab in nx_dup2 (fd1=7, fd2=6) at inode/fs_files.c:451 | apache#10 0x0000555555575af3 in dup2 (fd1=7, fd2=6) at inode/fs_files.c:473 | apache#11 0x000055555559d937 in basic_daemon_dup2 (dconf=0x5555555f8d80 <usrsocktest_daemon_config>) at usrsocktest_basic_daemon.c:335 | apache#12 0x000055555559ed80 in usrsocktest_test_basic_daemon_basic_daemon_dup2 () at usrsocktest_basic_daemon.c:612 | apache#13 0x000055555559f18d in usrsocktest_group_basic_daemon_run () at usrsocktest_basic_daemon.c:666 | apache#14 0x0000555555599f8d in run_tests (name=0x5555555dc8c3 "basic_daemon", test_fn=0x55555559ef50 <usrsocktest_group_basic_daemon_run>) at usrsocktest_main.c:117 | apache#15 0x000055555559a06c in run_all_tests () at usrsocktest_main.c:154 | apache#16 0x000055555559a3d1 in usrsocktest_main (argc=1, argv=0x7ffff3f25450) at usrsocktest_main.c:248 | apache#17 0x000055555555cad8 in nxtask_startup (entrypt=0x55555559a357 <usrsocktest_main>, argc=1, argv=0x7ffff3f25450) at sched/task_startup.c:70 | apache#18 0x0000555555559938 in nxtask_start () at task/task_start.c:134 Usrsock Deamon weakup and setup the poll want to perform close request, but locked on fs_getfilep(): | #0 _files_semtake (list=0x7ffff3f250b8) at inode/fs_files.c:51 | --> Request group lock but which hold by close request, deadlock | #1 0x00005555555758b1 in fs_getfilep (fd=5, filep=0x7ffff3f47190) at inode/fs_files.c:375 | #2 0x00005555555d3064 in poll_fdsetup (fd=5, fds=0x7ffff3f47290, setup=true) at vfs/fs_poll.c:79 | #3 0x00005555555d3243 in poll_setup (fds=0x7ffff3f47290, nfds=2, sem=0x7ffff3f47206) at vfs/fs_poll.c:139 | #4 0x00005555555d39a6 in nx_poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:383 | #5 0x00005555555d3abd in poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:501 | --> daemon weak up | #6 0x00005555555c62c7 in usrsocktest_daemon (param=0x5555555f5360 <g_ub_daemon>) at usrsocktest_daemon.c:1846 | apache#7 0x000055555559161e in pthread_startup (entry=0x5555555c60d3 <usrsocktest_daemon>, arg=0x5555555f5360 <g_ub_daemon>) at pthread/pthread_create.c:59 | apache#8 0x00005555555d45f0 in pthread_start () at pthread/pthread_create.c:175 | apache#9 0x0000000000000000 in ?? () Signed-off-by: chao an <anchao@xiaomi.com>

==2117790==ERROR: AddressSanitizer: global-buffer-overflow on address 0x64d9e3c0 at pc 0x59ac4e16 bp 0xcefe8058 sp 0xcefe8048 READ of size 1 at 0x64d9e3c0 thread T0 #0 0x59ac4e15 in up_nputs sim/up_nputs.c:54 #1 0x59a67e4c in syslog_default_write syslog/syslog_channel.c:220 #2 0x59a67823 in syslog_default_write syslog/syslog_write.c:101 #3 0x59a67f10 in syslog_write syslog/syslog_write.c:153 #4 0x59a651c3 in syslogstream_flush syslog/syslog_stream.c:60 #5 0x59a6564e in syslogstream_addchar syslog/syslog_stream.c:104 #6 0x59a6576f in syslogstream_putc syslog/syslog_stream.c:140 #7 0x5989fc4d in vsprintf_internal stdio/lib_libvsprintf.c:952 #8 0x598a1298 in lib_vsprintf stdio/lib_libvsprintf.c:1379 #9 0x59a64ea4 in nx_vsyslog syslog/vsyslog.c:223 #10 0x598a601a in vsyslog syslog/lib_syslog.c:68 #11 0x59b0e3dc in AIOTJS::logPrintf(int, char const*, ...) src/ajs_log.cpp:45 #12 0x59b03d56 in jse_dump_obj src/jse/quickjs/jse_quickjs.cpp:569 #13 0x59b03ea1 in jse_dump_error1(JSContext*, unsigned long long) src/jse/quickjs/jse_quickjs.cpp:602 #14 0x59b03dd9 in jse_dump_error(JSContext*) src/jse/quickjs/jse_quickjs.cpp:591 #15 0x59bed615 in ferry::DomComponent::callHook(char const*) src/framework/dom/component.cpp:65 #16 0x59bfe0ff in ferry::DomComponent::initialize() src/framework/dom/component.cpp:645 #17 0x59bb141d in dom_create_component(JSContext*, unsigned long long, unsigned long long, unsigned long long) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x365c41d) #18 0x59b4c0d3 in AIOTJS::__createComponent(JSContext*, unsigned long long, int, unsigned long long*) (/home/wangbowen/project/central/vela_miot_bes_m0/bin/audio+0x35f70d3) #19 0x5a56ec17 in js_call_c_function quickjs/quickjs.c:16108 Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>

apps/examples/usrsocktest/usrsocktest_basic_daemon.c: 321 static void basic_daemon_dup2(FAR struct usrsocktest_daemon_conf_s *dconf) 322 { ... 335 ret = dup2(sd2, sd); 352 } Usrsocktest Task hold the file group lock and send the close request to usrsock deamon : | #0 net_lockedwait_uninterruptible (sem=0x5555555f8ba2 <g_usrsockdev+34>) at utils/net_lock.c:427 | #1 0x000055555557489c in usrsockdev_do_request (conn=0x5555555f8800 <g_usrsock_connections>, iov=0x7ffff3f36040, iovcnt=1) at usrsock/usrsock_dev.c:1185 | --> send close request to usrsock deamon | | #2 0x00005555555d0439 in do_close_request (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:109 | #3 0x00005555555d04f5 in usrsock_close (conn=0x5555555f8800 <g_usrsock_connections>) at usrsock/usrsock_close.c:157 | #4 0x00005555555cf100 in usrsock_sockif_close (psock=0x7ffff3ea4a60) at usrsock/usrsock_sockif.c:234 | #5 0x00005555555c7b2f in psock_close (psock=0x7ffff3ea4a60) at socket/net_close.c:102 | #6 0x000055555557a518 in sock_file_close (filep=0x7ffff3f253d0) at socket/socket.c:115 | #7 0x000055555557678f in file_close (filep=0x7ffff3f253d0) at vfs/fs_close.c:74 | #8 0x000055555557694c in file_dup2 (filep1=0x7ffff3f253e8, filep2=0x7ffff3f253d0) at vfs/fs_dup2.c:129 | ---> hold group file list lock ( _files_semtake(list) ) | | #9 0x0000555555575aab in nx_dup2 (fd1=7, fd2=6) at inode/fs_files.c:451 | #10 0x0000555555575af3 in dup2 (fd1=7, fd2=6) at inode/fs_files.c:473 | #11 0x000055555559d937 in basic_daemon_dup2 (dconf=0x5555555f8d80 <usrsocktest_daemon_config>) at usrsocktest_basic_daemon.c:335 | #12 0x000055555559ed80 in usrsocktest_test_basic_daemon_basic_daemon_dup2 () at usrsocktest_basic_daemon.c:612 | #13 0x000055555559f18d in usrsocktest_group_basic_daemon_run () at usrsocktest_basic_daemon.c:666 | #14 0x0000555555599f8d in run_tests (name=0x5555555dc8c3 "basic_daemon", test_fn=0x55555559ef50 <usrsocktest_group_basic_daemon_run>) at usrsocktest_main.c:117 | #15 0x000055555559a06c in run_all_tests () at usrsocktest_main.c:154 | #16 0x000055555559a3d1 in usrsocktest_main (argc=1, argv=0x7ffff3f25450) at usrsocktest_main.c:248 | #17 0x000055555555cad8 in nxtask_startup (entrypt=0x55555559a357 <usrsocktest_main>, argc=1, argv=0x7ffff3f25450) at sched/task_startup.c:70 | #18 0x0000555555559938 in nxtask_start () at task/task_start.c:134 Usrsock Deamon weakup and setup the poll want to perform close request, but locked on fs_getfilep(): | #0 _files_semtake (list=0x7ffff3f250b8) at inode/fs_files.c:51 | --> Request group lock but which hold by close request, deadlock | #1 0x00005555555758b1 in fs_getfilep (fd=5, filep=0x7ffff3f47190) at inode/fs_files.c:375 | #2 0x00005555555d3064 in poll_fdsetup (fd=5, fds=0x7ffff3f47290, setup=true) at vfs/fs_poll.c:79 | #3 0x00005555555d3243 in poll_setup (fds=0x7ffff3f47290, nfds=2, sem=0x7ffff3f47206) at vfs/fs_poll.c:139 | #4 0x00005555555d39a6 in nx_poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:383 | #5 0x00005555555d3abd in poll (fds=0x7ffff3f47290, nfds=2, timeout=-1) at vfs/fs_poll.c:501 | --> daemon weak up | #6 0x00005555555c62c7 in usrsocktest_daemon (param=0x5555555f5360 <g_ub_daemon>) at usrsocktest_daemon.c:1846 | #7 0x000055555559161e in pthread_startup (entry=0x5555555c60d3 <usrsocktest_daemon>, arg=0x5555555f5360 <g_ub_daemon>) at pthread/pthread_create.c:59 | #8 0x00005555555d45f0 in pthread_start () at pthread/pthread_create.c:175 | #9 0x0000000000000000 in ?? () Signed-off-by: chao an <anchao@xiaomi.com>

Author: Gregory Nutt <gnutt@nuttx.org> Run all .c and .h modified in PR through nxstyle. Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com> feature k210 (#16) * arch: risc-v: Add support for __LP64__ to types.h * arch: risc-v: Add support for RV64GC to common files * arch: risc-v: Add support for Kendryte K210 processor (RV64GC) * boards: risk-v: Add support for Sipeed Maix Bit with K210 * tools: Add support for Kendryte K210 processor (cherry picked from commit e33fc3d) Conflicts: tools/refresh.sh tools/testbuild.sh

tg_info is still in use after task_uninit_info() unifies lib_stream_* with life cycle of task info to avoid this issue. |apache#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119 |apache#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73 |apache#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120 |apache#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126 |apache#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98 |apache#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162 |apache#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360 |apache#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455 |apache#18 0x569f90b9 in _exit (status=0) at task/exit.c:82 |apache#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61 |apache#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91 |apache#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140 |apache#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70 |apache#23 0x56767f58 in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

tg_info is still in use after task_uninit_info() unifies lib_stream_* with life cycle of task info to avoid this issue. | ==1940861==ERROR: AddressSanitizer: heap-use-after-free on address 0xf47032e0 at pc 0x5676dc4f bp 0xf2f38c68 sp 0xf2f38c58 | |apache#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119 |apache#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73 |apache#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120 |apache#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126 |apache#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98 |apache#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162 |apache#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360 |apache#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455 |apache#18 0x569f90b9 in _exit (status=0) at task/exit.c:82 |apache#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61 |apache#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91 |apache#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140 |apache#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70 |apache#23 0x56767f58 in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

tg_info is still in use after task_uninit_info(), unifies lib_stream_* with life cycle of task info to avoid this issue. | ==1940861==ERROR: AddressSanitizer: heap-use-after-free on address 0xf47032e0 at pc 0x5676dc4f bp 0xf2f38c68 sp 0xf2f38c58 | |apache#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119 |apache#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73 |apache#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120 |apache#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126 |apache#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98 |apache#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162 |apache#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360 |apache#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455 |apache#18 0x569f90b9 in _exit (status=0) at task/exit.c:82 |apache#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61 |apache#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91 |apache#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140 |apache#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70 |apache#23 0x56767f58 in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

tg_info is still in use after task_uninit_info(), unifies lib_stream_* with life cycle of task info to avoid this issue. | ==1940861==ERROR: AddressSanitizer: heap-use-after-free on address 0xf47032e0 at pc 0x5676dc4f bp 0xf2f38c68 sp 0xf2f38c58 | |#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119 |#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73 |#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120 |#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126 |#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98 |#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162 |#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360 |#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455 |#18 0x569f90b9 in _exit (status=0) at task/exit.c:82 |#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61 |#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91 |#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140 |#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70 |#23 0x56767f58 in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

tg_info is still in use after task_uninit_info(), unifies lib_stream_* with life cycle of task info to avoid this issue. | ==1940861==ERROR: AddressSanitizer: heap-use-after-free on address 0xf47032e0 at pc 0x5676dc4f bp 0xf2f38c68 sp 0xf2f38c58 | |apache#10 0xf7abec89 in __asan::__asan_report_load2 (addr=4100993760) at ../../../../src/libsanitizer/asan/asan_rtl.cpp:119 |apache#11 0x5677356a in nxsem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:73 |apache#12 0x56773695 in sem_destroy (sem=0xf47032e0) at semaphore/sem_destroy.c:120 |apache#13 0x5676faa2 in nxmutex_destroy (mutex=0xf47032e0) at include/nuttx/mutex.h:126 |apache#14 0x567a3430 in lib_stream_release (group=0xf4901ba0) at stdio/lib_libstream.c:98 |apache#15 0x5676da75 in group_release (group=0xf4901ba0) at group/group_leave.c:162 |apache#16 0x5676e51c in group_leave (tcb=0xf5377740) at group/group_leave.c:360 |apache#17 0x569fe79b in nxtask_exithook (tcb=0xf5377740, status=0) at task/task_exithook.c:455 |apache#18 0x569f90b9 in _exit (status=0) at task/exit.c:82 |apache#19 0x56742680 in exit (status=0) at stdlib/lib_exit.c:61 |apache#20 0x56a69c78 in iperf_showusage (progname=0xf2f28838 "iperf", exitcode=0) at iperf_main.c:91 |apache#21 0x56a6a6ec in iperf_main (argc=1, argv=0xf2f28830) at iperf_main.c:140 |apache#22 0x5679c148 in nxtask_startup (entrypt=0x56a69c78 <iperf_main>, argc=1, argv=0xf2f28830) at sched/task_startup.c:70 |apache#23 0x56767f58 in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

- add pwm driver Signed-off-by: Runcheng Lu <runcheng.lu@hpmicro.com>

Race condition if the remote proc is stoped during initialization phase | #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376 | #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971 | #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891 | #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922 | #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086 | #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378 | #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206 | apache#7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400 | apache#8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356 | apache#9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164 | apache#10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845 | apache#11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744 | apache#12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828 | apache#13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245 | apache#14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75 | apache#15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74 | apache#16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70 | apache#17 0x020b363c in nxtask_start () at task/task_start.c:134 Change-Id: I6996b4f7891e9e4452f3182f42360b66bdbc2d4c Signed-off-by: chao an <anchao@xiaomi.com>

Race condition if the remote proc is stoped during initialization phase | #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376 | #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971 | #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891 | #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922 | #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086 | #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378 | #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206 | apache#7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400 | apache#8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356 | apache#9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164 | apache#10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845 | apache#11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744 | apache#12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828 | apache#13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245 | apache#14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75 | apache#15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74 | apache#16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70 | apache#17 0x020b363c in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

Race condition if the remote proc is stoped during initialization phase | #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376 | #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971 | #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891 | #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922 | #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086 | #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378 | #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206 | #7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400 | #8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356 | #9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164 | #10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845 | #11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744 | #12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828 | #13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245 | #14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75 | #15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74 | #16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70 | #17 0x020b363c in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

Race condition if the remote proc is stoped during initialization phase | #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376 | #1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971 | #2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891 | #3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922 | #4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086 | #5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378 | #6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206 | apache#7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400 | apache#8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356 | apache#9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164 | apache#10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845 | apache#11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744 | apache#12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828 | apache#13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245 | apache#14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75 | apache#15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74 | apache#16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70 | apache#17 0x020b363c in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

- add pwm driver Signed-off-by: Runcheng Lu <runcheng.lu@hpmicro.com>

Race condition if the remote proc is stoped during initialization phase | #0 0x0249f959 in rpmsg_destroy_ept (ept=0xffffffc0) at open-amp/lib/rpmsg/rpmsg.c:376 | apache#1 0x024a938c in rpmsg_deinit_vdev (rvdev=0xf2303a48) at open-amp/lib/rpmsg/rpmsg_virtio.c:971 | apache#2 0x02117e33 in rptun_dev_stop (rproc=0xf2303a04, stop_ns=true) at rptun/rptun.c:891 | apache#3 0x021181d8 in rptun_do_ioctl (priv=0xf2303a00, cmd=11010, arg=0) at rptun/rptun.c:922 | apache#4 0x02119722 in rptun_ioctl_foreach (cpuname=0x0, cmd=11010, value=0) at rptun/rptun.c:1086 | apache#5 0x0211b9df in rptun_poweroff (cpuname=0x0) at rptun/rptun.c:1378 | apache#6 0x02053aa6 in board_power_off (status=0) at sim/sim_head.c:206 | apache#7 0x0253d65c in boardctl (cmd=65283, arg=0) at boardctl.c:400 | apache#8 0x021eb497 in cmd_poweroff (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_syscmds.c:356 | apache#9 0x021cdb4d in nsh_command (vtbl=0xef606280, argc=1, argv=0xef9b73e0) at nsh_command.c:1164 | apache#10 0x021baa72 in nsh_execute (vtbl=0xef606280, argc=1, argv=0xef9b73e0, redirfile=0x0, oflags=0) at nsh_parse.c:845 | apache#11 0x021c6b0a in nsh_parse_command (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2744 | apache#12 0x021c7166 in nsh_parse (vtbl=0xef606280, cmdline=0xef606708 "poweroff") at nsh_parse.c:2828 | apache#13 0x0221fa2f in nsh_session (pstate=0xef606280, login=1, argc=1, argv=0xef7a7860) at nsh_session.c:245 | apache#14 0x021f8c04 in nsh_consolemain (argc=1, argv=0xef7a7860) at nsh_consolemain.c:75 | apache#15 0x021b77eb in nsh_main (argc=1, argv=0xef7a7860) at nsh_main.c:74 | apache#16 0x02166ddf in nxtask_startup (entrypt=0x21b76ca <nsh_main>, argc=1, argv=0xef7a7860) at sched/task_startup.c:70 | apache#17 0x020b363c in nxtask_start () at task/task_start.c:134 Signed-off-by: chao an <anchao@xiaomi.com>

patacongo reviewed Dec 30, 2019

View reviewed changes

masayuki2009 added 5 commits December 31, 2019 12:03

arch: risc-v: Add support for __LP64__ to types.h

46e3ffa

arch: risc-v: Add support for RV64GC to common files

0cb6f96

arch: risc-v: Add support for Kendryte K210 processor (RV64GC)

d1e94a2

boards: risk-v: Add support for Sipeed Maix Bit with K210

2509758

tools: Add support for Kendryte K210 processor

a59e40d

masayuki2009 force-pushed the feature_k210 branch from 6217676 to a59e40d Compare December 31, 2019 03:13

patacongo changed the base branch from master to dev December 31, 2019 14:53

patacongo merged commit fbc046e into apache:dev Dec 31, 2019

masayuki2009 deleted the feature_k210 branch March 20, 2020 01:07

anchao mentioned this pull request Jun 15, 2020

arch/stackframe: fix heap buffer overflow #1234

Merged

donghengqaz pushed a commit to donghengqaz/incubator-nuttx that referenced this pull request Jul 20, 2020

Merge pull request apache#16 from midokura/feature/sdc-integration-ge…

6295f93

…nnerat-images-devkit Feature/sdc integration generation images for devkit

anchao mentioned this pull request Dec 14, 2020

fs/unionfs: remove excessive protection to avoid deadlock #2532

Merged

GUIDINGLI mentioned this pull request Feb 23, 2022

os init_state: add new state OSINIT_IDLELOOP #5590

Merged

GUIDINGLI mentioned this pull request Mar 25, 2022

epoll: fix epoll close error, report by kasan #5846

Merged

anchao mentioned this pull request Aug 1, 2022

mm_heap/kasan: poison free node after return back the heap list #6750

Merged

CV-Bowen mentioned this pull request Sep 1, 2022

up_nputs: fix AddressSanitizer: global-buffer-overflow problem #6981

Merged

chenzhihong007 pushed a commit to hpmicro/nuttx that referenced this pull request Aug 1, 2023

arch:risc-v:hpm6750:add pwm driver apache#16

8ff1575

- add pwm driver Signed-off-by: Runcheng Lu <runcheng.lu@hpmicro.com>

chenzhihong007 pushed a commit to hpmicro/nuttx that referenced this pull request Feb 23, 2024

arch:risc-v:hpm6750:add pwm driver apache#16

3b308ce

- add pwm driver Signed-off-by: Runcheng Lu <runcheng.lu@hpmicro.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

feature k210 #16

feature k210 #16

masayuki2009 commented Dec 30, 2019

patacongo Dec 30, 2019 •

edited

masayuki2009 Dec 31, 2019

masayuki2009 commented Dec 31, 2019

feature k210 #16

feature k210 #16

Conversation

masayuki2009 commented Dec 30, 2019

patacongo Dec 30, 2019 • edited

Choose a reason for hiding this comment

masayuki2009 Dec 31, 2019

Choose a reason for hiding this comment

masayuki2009 commented Dec 31, 2019

patacongo Dec 30, 2019 •

edited