usingtrafficportal.rst

Traffic Portal - Using

Traffic Portal is the official Traffic Control UI. Traffic Portal typically runs on a different machine than Traffic Ops, and works by using the Traffic Ops API. The following high-level items are available in the Traffic Portal menu.

Traffic Portal Start Page

Change Logs

At the top-right of every page is a bubble icon and badge count indicating the number of changes made to the CDN since the last viewing. Clicking on this expands a short list, with an option to See All Change Logs. Clicking on this will navigate to the "Changelog" page.

The Changelog Dialog

The Full Change Logs Page

Sidebar Bottom Buttons

At the bottom of the sidebar, a few action buttons may be found. At the far left, is the Logout button.

The Logout Button

Clicking on this button will cause the current user session to end; further use of the Traffic Portal UI will require re-authentication. Next to this is the User Profile button.

The User Profile Button

Clicking on this button will take the user to his or her user profile page, where much of their information (contact, username etc.) is editable. The next button to the right is the Release Info button.

The Release Info Button

When this button is clicked, a modal window will appear, displaying the Traffic Portal version, the date on which it was built, and the network location of the Traffic Ops server that serves the to-api used by the Traffic Portal instance. The final button is the Popout button.

The Popout Button

This button will open the current view in a new browsing context. Most browsers will implement this as a new tab, but can be configured instead to open them in a new window - check your browser's configuration and set it as desired.

Dashboard

The Dashboard is the default landing page for Traffic Portal. It provides a real-time view into the main performance indicators of the CDNs managed by Traffic Control. It also displays various statistics about the overall health of your CDN.

Current Bandwidth

The current bandwidth of all of your CDNs.

Current Connections

The current number of connections to all of your CDNs.

Healthy Caches

Displays the number of healthy cache servers across all CDNs. Click the link to view the healthy caches on the cache stats page.

Unhealthy Caches

Displays the number of unhealthy cache servers across all CDNs. Click the link to view the unhealthy caches on the cache stats page.

Online Caches

Displays the number of cache servers with ONLINE Status. Traffic Monitor will not monitor the state of ONLINE servers.

Reported Caches

Displays the number of cache servers with REPORTED Status.

Offline Caches

Displays the number of cache servers with OFFLINE Status.

Admin Down Caches

Displays the number of caches with ADMIN_DOWN Status.

Each component of this view is updated on the intervals defined in the traffic_portal/app/src/traffic_portal_properties.json configuration file.

CDNs

A table of CDNs with the following columns:

Name

The name of the CDN

Domain

The CDN's TLD (Top-Level Domain)

DNSSEC Enabled

'true' if tr-dnssec is enabled on this CDN, 'false' otherwise.

CDN management includes the ability to (where applicable):

• create a new CDN
• update an existing CDN
• delete an existing CDN
• Queue Updates on all servers in a CDN, or clear such updates
• Compare CDN Snapshots
• create a CDN Snapshot
• manage a CDN's DNSSEC keys
• manage a CDN's Federations
• view Delivery Services of a CDN
• view CDN Profiles
• view servers within a CDN

Monitor

The Monitor section of Traffic Portal is used to display statistics regarding the various cache servers within all CDNs visible to the user. It retrieves this information through the to-api from Traffic Monitor instances.

The 'Monitor' Menu

Cache Checks

A real-time view into the status of each cache server. The Monitor --> Cache Checks page is intended to give an overview of the caches managed by Traffic Control as well as their status.

Warning

Several of these columns may be empty by default - particularly in the ciab environment - and require Traffic Ops Extensions <admin-to-ext-script> to be installed/enabled/configured in order to work.

Hostname

The (short) hostname of the cache server

Profile

The profile-name of the Profile used by the cache server

Status

The Status of the cache server

health-proto

UPD

Displays whether or not this cache server has configuration updates pending

RVL

Displays whether or not this cache server (or one or more of its parents) has content invalidation requests pending

ILO

Indicates the status of an iLO (Integrated Lights-Out) interface for this cache server

10G

Indicates whether or not the IPv4 address of this cache server is reachable via ICMP "pings"

FQDN

DNS check that matches what the DNS servers respond with compared to what Traffic Ops has configured

DSCP

Checks the DSCP (Differentiated Services Code Point) value of packets received from this cache server

10G6

Indicates whether or not the IPv6 address of this cache server is reachable via ICMP "pings"

MTU

Checks the MTU (Maximum Transmission Unit) by sending ICMP "pings" from the Traffic Ops server

RTR

Checks the reachability of the cache server from the CDN's configured Traffic Routers

CHR

Cache-Hit Ratio (percent)

CDU

Total Cache-Disk Usage (percent)

ORT

Uses the ORT script on the cache server to determine if the configuration in Traffic Ops matches the configuration on cache server itself. The user as whom this script runs must have an SSH key on each server.

Cache Stats

A table showing the results of the periodic to-check-ext that are run. These can be grouped by Cache Group and/or Profile.

Profile

profile-name of the Profile applied to the Edge-tier or Mid-tier cache server, or the special name "ALL" indicating that this row is a group of all cache servers within a single Cache Group

Host

'ALL' for entries grouped by Cache Group, or the hostname of a particular cache server

Cache Group

Name of the Cache Group <cache-group-name> to which this server belongs, or the name of the Cache Group that is grouped for entries grouped by Cache Group, or the special name "ALL" indicating that this row is an aggregate across all Cache Groups

Healthy

True/False as determined by Traffic Monitor

health-proto

Status

Status of the cache server or Cache Group

Connections

Number of currently open connections to this cache server or Cache Group

MbpsOut

Data flow rate outward from the CDN (toward client) in Megabits per second

Services

Services groups the functionality to modify Delivery Services - for those users with the necessary permissions - or make Delivery Service Requests for such changes - for users without necessary permissions. Delivery Services can also be grouped by Service Category.

The 'Services' Menu

Delivery Services

This page contains a table displaying all Delivery Services visible to the user as determined by their Tenant.

Table of Delivery Services

Use the Select Columns menu to select the delivery service columns to view and search. Columns can also be rearranged using drag-and-drop. Available delivery service columns include:

• ds-active (visible by default)
• ds-anonymous-blocking
• ds-cdn (visible by default)
• ds-check-path
• ds-consistent-hashing-qparams
• ds-consistent-hashing-regex
• ds-deep-caching
• ds-display-name
• ds-dns-bypass-cname
• ds-dns-bypass-ip
• ds-dns-bypass-ipv6
• ds-dns-bypass-ttl
• ds-dns-ttl
• ds-dscp (visible by default)
• ds-edge-header-rw-rules
• ds-fqpr
• ds-first-header-rw-rules
• ds-geo-limit
• ds-geo-limit-countries
• ds-geo-limit-redirect-url
• ds-geo-provider
• ds-geo-miss-default-latitude
• ds-geo-miss-default-longitude
• ds-global-max-mbps
• ds-global-max-tps
• ds-http-bypass-fqdn
• ds-info-url
• ds-initial-dispersion
• ds-inner-header-rw-rules
• ds-ipv6-routing (visible by default)
• ds-last-header-rw-rules
• ds-longdesc
• ds-max-dns-answers
• ds-max-origin-connections
• ds-mid-header-rw-rules
• ds-origin-shield
• ds-origin-url (visible by default)
• ds-profile
• ds-protocol (visible by default)
• ds-qstring-handling (visible by default)
• ds-range-request-handling
• ds-slice-block-size
• ds-raw-remap
• ds-regex-remap
• ds-regionalgeo
• ds-routing-name
• ds-signing-algorithm (visible by default)
• ds-tenant (visible by default)
• ds-topology
• ds-tr-resp-headers
• ds-tr-req-headers
• ds-types (visible by default)
• ds-multi-site-origin
• ds-xmlid (visible by default)

Delivery Service management includes the ability to (where applicable):

• Create a new Delivery Service
• Clone an existing Delivery Service
• Update an existing Delivery Service
• Delete an existing Delivery Service
• Compare Delivery Services
• Manage Delivery Service SSL keys
• Manage Delivery Service URL signature keys
• Manage Delivery Service URI signing keys
• Manage Delivery Service invalidation requests
• Manage Delivery Service origins
• Manage Delivery Service regular expressions
• delivery_service_required_server_capabilities
• Manage Delivery Service server assignments
• Manage Delivery Service steering targets
• Manage Delivery Service static DNS records within a Delivery Service subdomain

• Test pattern-based-consistenthash

  static-dns-qht

Delivery Service Requests

If enabled in the traffic_portal_properties.json configuration file, all Delivery Service changes (create, update and delete) are captured as a Delivery Service Request and must be reviewed before fulfillment/deployment.

Table of Delivery Service Requests

Delivery Service: A unique string that identifies the Delivery Service with which the request is associated. This unique string is also known (and ofter referred to within documentation and source code) as a Delivery Service key' or 'XML ID'/'xml_id'/'xmlid' :Type: The type of Delivery Service Request: 'create', 'update', or 'delete' according to what was requested :Status: The status of the Delivery Service Request. Has the following possible values:

draft

The Delivery Service Request is not ready for review and fulfillment

submitted

The Delivery Service Request is ready for review and fulfillment

rejected

The Delivery Service Request has been rejected and cannot be modified

pending

The Delivery Service Request has been fulfilled but the changes have yet to be deployed

complete

The Delivery Service Request has been fulfilled and the changes have been deployed

Author

The user responsible for creating the Delivery Service Request

Assignee

The user responsible for fulfilling the Delivery Service Request. Currently, the operations role or above is required to assign Delivery Service Requests

Last Edited By

The last user to edit the Delivery Service Request

Created

Relative time indicating when the Delivery Service Request was created

Actions

Actions that can be performed on a Delivery Service Request. The following actions are provided:

fulfill

Implement the changes captured in the Delivery Service Request

reject

Reject the changes captured in the Delivery Service Request

delete

Delete the Delivery Service Request

Delivery Service Request management includes the ability to (where applicable):

• create a new Delivery Service Request
• update an existing Delivery Service Request
• delete an existing Delivery Service Request
• update the status of a Delivery Service Request
• assign a Delivery Service Request
• reject a Delivery Service Request
• fulfill a Delivery Service Request
• complete a Delivery Service Request

ds_requests

Configure

Interfaces for managing the various components of Traffic Control and how they interact are grouped under Configure.

The 'Configure' Menu

Servers

A configurable table of all servers (of all kinds) across all Delivery Services and CDNs visible to the user.

Table of Servers

Use the Quick Search to search across all table columns or the column filter to apply a more powerful filter to individual columns. Use the Select Columns menu to select the server columns to view. Columns can also be rearranged using drag-and-drop. Available server columns include:

Cache Group

[Visible by default] The Name of the Cache Group <cache-group-name> to which this server belongs

CDN

[Visible by default] The name of the CDN to which the server belongs

Domain

[Visible by default] The domain part of the server's FQDN (Fully Qualified Domain Name)

Hash ID

The identifier of the server used in Traffic Router's consistent hashing algorithm.

Host

[Visible by default] The (short) hostname of the server

HTTPS Port

The port on which the server listens for incoming HTTPS connections/requests

ID

An integral, unique identifier for this server

ILO IP Address

The IPv4 address of the server's ILO (Integrated Lights-Out) service

Hewlett Packard ILO Wikipedia Page

ILO IP Gateway

The IPv4 gateway address of the server's ILO (Integrated Lights-Out) service

ILO IP Netmask

The IPv4 subnet mask of the server's ILO (Integrated Lights-Out) service

ILO Username

The user name for the server's ILO (Integrated Lights-Out) service

Interface Name

The name of the primary network interface used by the server

IPv6 Address

[Visible by default] The IPv6 address and subnet mask of interfaceName

IPv6 Gateway

The IPv6 address of the gateway used by interfaceName

Last Updated

The date and time at which this server description was last modified

Mgmt IP Address

The IPv4 address of some network interface on the server used for 'management'

Mgmt IP Gateway

The IPv4 address of a gateway used by some network interface on the server used for 'management'

Mgmt IP Netmask

The IPv4 subnet mask used by some network interface on the server used for 'management'

IPv4 Gateway

The IPv4 address of the gateway used by interfaceName

IPv4 Address

[Visible by default] The IPv4 address of interfaceName

Network MTU

The Maximum Transmission Unit (MTU) to configured on interfaceName

IPv4 Subnet

The IPv4 subnet mask used by interfaceName

Offline Reason

A user-entered reason why the server is in ADMIN_DOWN or OFFLINE status

Phys Location

The name of the physical location where the server resides

Profile

[Visible by default] The profile-name of the Profile used by this server

Rack

A string indicating "server rack" location

Reval Pending

[Visible by default] A boolean value represented as a clock (content invalidation/revalidation is pending) or green check mark (content invalidation/revalidation is not pending)

Router Hostname

The human-readable name of the router responsible for reaching this server's interface

Router Port

The human-readable name of the port used by the router responsible for reaching this server's interface

Status

[Visible by default] The Status of the server

health-proto

TCP Port

The port on which this server listens for incoming TCP connections

Type

[Visible by default] The name of the Type of this server

Update Pending

[Visible by default] A boolean value represented as a clock (updates are pending) or green check mark (updates are not pending), typically to be acted upon by Traffic Ops ORT

Server management includes the ability to (where applicable):

• Create a new server
• Update an existing server
• Delete an existing server
• Queue Updates on a server, or clear such updates
• Update server status
• View server Delivery Services
• Clone Delivery Service assignments
• Assign Delivery Services to server(s)
• server_server_capabilities

Origins

A table of all Origins. These are automatically created for the Origins served by Delivery Services throughout all CDNs, but additional ones can be created at will. The table has the following columns:

Name

The name of the Origin. If this Origin was created automatically for a Delivery Service, this will be the ds-xmlid of that Delivery Service.

Tenant

The name of the Tenant that owns this Origin - this is not necessarily the same as the Tenant that owns the Delivery Service to which this Origin belongs.

Primary

Either true to indicate that this is the "primary" Origin for the Delivery Service to which it is assigned, or false otherwise.

Delivery Service

The ds-xmlid of the Delivery Service to which this Origin is assigned.

FQDN

The FQDN (Fully Qualified Domain Name) of the Origin.

IPv4 Address

The Origin's IPv4 address, if configured.

IPv6 Address

The Origin's IPv6 address, if configured.

Protocol

The protocol this Origin uses to serve content. One of

• http
• https

Port

The port on which the Origin listens for incoming HTTP(S) requests.

Note

If this field appears blank in the table, it means that a default was chosen for the Origin based on its Protocol - 80 for "http", 443 for "https".

Coordinate

The name of the geographic coordinate pair that defines the physical location of this Origin. Origins created for Delivery Services automatically will not have associated Coordinates. This can be rectified on the details pages for said Origins

Cachegroup

The Name of the Cache Group <cache-group-name> to which this Origin belongs, if any.

Profile

The profile-name of a Profile used by this Origin.

Origin management includes the ability to (where applicable):

• create a new Origin
• update an existing Origin
• delete an existing Origin

Profiles

A table of all Profiles. From here you can see Parameters, servers and Delivery Services assigned to each Profile. Each entry in the table has these fields:

Name

The profile-name of the Profile

Type

The profile-type of this Profile, which indicates the kinds of objects to which the Profile may be assigned

Routing Disabled

The profile-routing-disabled setting of this Profile

Description

This Profile's profile-description

CDN

The profile-cdn to which this Profile is restricted. To use the same Profile across multiple CDNs, clone the Profile and change the clone's profile-cdn field.

Profile management includes the ability to (where applicable):

• create a new Profile
• update an existing Profile
• delete an existing Profile
• clone a Profile
• export a Profile
• view Profile Parameters
• view Profile Delivery Services
• view Profile servers

Parameters

This page displays a table of Parameters from all Profiles with the following columns:

Name

The parameter-name of the Parameter

Config File

The parameter-config-file to which the Parameter belongs.

Value

The parameter-value of the Parameter.

Secure

Whether or not the Parameter is parameter-secure

Profiles

The number of Profiles currently using this Parameter

Parameter management includes the ability to (where applicable):

• create a new Parameter
• update an existing Parameter
• delete an existing Parameter
• view Parameter Profiles
• manage assignments of a Parameter to one or more Profiles and/or Delivery Services

Types

Types group Delivery Services, servers and Cache Groups for various purposes. Each entry in the table shown on this page has the following fields:

Name

The name of the Type

Use In Table

States the use of this Type, e.g. server indicates this is a Type assigned to servers

Description

A short, usually user-defined, description of the Type

Type management includes the ability to (where applicable):

• create a new Type
• update an existing Type
• delete an existing Type
• view Delivery Services assigned to a Type
• view servers assigned to a Type
• view Cache Groups assigned to a Type

Statuses

This page shows a table of Statuses with the following columns:

Name

The name of this Status

Description

A short, usually user-defined, description of this Status

Status management includes the ability to (where applicable):

• create a new Status
• update an existing Status
• delete an existing Status
• view Statuses

Topology

Topology groups views and functionality that deal with how CDNs and their Traffic Control components are grouped and distributed, both on a logical level as well as a physical level.

'Topology' Menu

Cache Groups

This page is a table of Cache Groups, each entry of which has the following fields:

Name

The full Name of this Cache Group <cache-group-name>

Short Name

This Cache Group's Short Name <cache-group-short-name>

Type

This Cache Group's Type <cache-group-type>

Latitude

This Cache Group's Latitude <cache-group-latitude>

Longitude

This Cache Group's Longitude <cache-group-longitude>

Cache Group management includes the ability to (where applicable):

• create a new Cache Group
• update an existing Cache Group
• delete an existing Cache Group
• Queue Updates for all servers in a Cache Group, or clear such updates

• view Cache Group ASN (Autonomous System Number)s

  The Wikipedia page on Autonomous System Numbers

• view and assign Cache Group Parameters
• view Cache Group servers

Coordinates

Topology --> Coordinates allows a label to be given to a set of geographic coordinates for ease of use. Each entry in the table on this page has the following fields:

Name

The name of this coordinate pair

Latitude

The geographic latitude part of the coordinate pair

Longitude

The geographic longitude part of the coordinate pair

Coordination management includes the ability to (where applicable):

• create a new coordinate pair
• update an existing coordinate pair
• delete an existing coordinate pair

Phys Locations

A table of Physical Locations which may be assigned to servers and Cache Groups, typically for the purpose of optimizing client routing. Each entry has the following columns:

Name

The full name of the Physical Location

Short Name

A shorter, more human-friendly name for this Physical Location

Address

The Physical Location's street address (street number and name)

City

The city within which the Physical Location resides

State

The state within which the Physical Location's city lies

Region

The Region to which this Physical Location has been assigned

Physical Location management includes the ability to (where applicable):

• create a new Physical Location
• update an existing Physical Location
• delete an existing Physical Location
• view Physical Location servers

Divisions

Each entry in the table of Divisions on this page has the following fields:

Name

The name of the Division

Division management includes the ability to (where applicable):

• create a new Division
• delete an existing Division
• modify an existing Division
• view Regions within a Division

Regions

Each entry in the table of Regions on this page has the following fields:

Name

The name of this Region

Division

The Division to which this Region is assigned

Region management includes the ability to (where applicable):

• create a new Region
• update an existing Region
• delete an existing Region
• view Physical Locations within a Region

ASNs

Manage ASN (Autonomous System Number)s. Each entry in the table on this page has the following fields:

ASN

The actual ASN (Autonomous System Number)

Cache Group

The Cache Group to which this ASN (Autonomous System Number) is assigned

ASN (Autonomous System Number) management includes the ability to (where applicable):

• create a new ASN (Autonomous System Number)
• update an existing ASN (Autonomous System Number)
• delete an existing ASN (Autonomous System Number)

Autonomous System (Internet) Wikipedia Page

Tools

Tools contains various tools that don't directly relate to manipulating Traffic Control components or their groupings.

The 'Tools' Menu

Invalidate Content

Here, specific assets can be invalidated in all caches of a Delivery Service, forcing content to be updated from the origin. Specifically, this doesn't mean that cache servers will immediately remove items from their caches, but rather will fetch new copies whenever a request is made matching the 'Asset URL' regular expression. This behavior persists until the Content Invalidation Job's job-ttl expires.

Warning

This method forces cache servers to "re-validate" content, so in order to work properly the Origin needs to support revalidation according to section 4.3.2 of 7234.

Each entry in the table on this page has the following fields:

Delivery Service

The Delivery Service to which to apply this Content Invalidation Job

Asset URL

A URL or regular expression which describes the asset(s) to be invalidated

TTL (Hours)

A TTL (Time To Live) (as a number of hours) over which the Content Invalidation Job shall remain active

Start

An effective start time until which the job is delayed

Expires

The date/time at which the Content Invalidation Job will end (effectively "Start" plus "TTL (Hours)")

Created By

The user name of the person who created this Content Invalidation Job

Invalidation Type

The job-invalidation-type of this Content Invalidation Job

Invalidate content includes the ability to (where applicable):

• create a new Content Invalidation Job

Generate ISO

Generates a boot-able system image for any of the servers in the Servers table (or any server for that matter). Currently it only supports CentOS 7, but if you're brave and pure of heart you MIGHT be able to get it to work with other Unix-like Operating Systems. The interface is mostly self-explanatory, but here is a short explanation of the fields in that form.

For instructions on setting up the Kickstart ISO generation files, see Creating-CentOS-Kickstart.

Copy Server Attributes From

Optional. This option lets the user choose a server from the Traffic Ops database and will auto-fill the other fields as much as possible based on that server's properties

OS Version

This list is populated by modifying the osversions.json file on the Traffic Ops server. This file maps OS names to the name of a directory under kickstart.files.location (/var/www/files by default).

Hostname

The desired hostname of the resultant system

Domain

The desired domain name of the resultant system

DHCP

If this is 'no' the IP settings of the system must be specified, and the following extra fields will appear:

IP Address

The resultant system's IPv4 address

IPv6 Address

The resultant system's IPv6 address

Network Subnet

The system's network subnet mask

Network Gateway

The system's network gateway's IPv4 address

IPv6 Gateway

The system's network gateway's IPv6 address

Management IP Address

An optional IP address (IPv4 or IPv6) of a "management" server for the resultant system (e.g. for ILO (Integrated Lights-Out))

Management IP Netmask

The subnet mask (IPv4 or IPv6) used by a "management" server for the resultant system (e.g. for ILO (Integrated Lights-Out)) - only needed if the Management IP Address is provided

Management IP Gateway

The IP address (IPv4 or IPv6) of the network gateway used by a "management" server for the resultant system (e.g. for ILO (Integrated Lights-Out)) - only needed if the Management IP Address is provided

Management Interface

The network interface used by a "management" server for the resultant system (e.g. for ILO (Integrated Lights-Out)) - only needed if the Management IP Address is provided. Must not be the same as "Interface Name".

Network MTU

The system's network's MTU (Maximum Transmission Unit). Despite being a text field, this can only be 1500 or 9000 - it should almost always be 1500

The Maximum transmission unit Wikipedia Page

Disk for OS Install

The disk on which to install the base system. A reasonable default is sda (the /dev/ prefix is not necessary)

Root Password

The password to be used for the root user. Input is hashed using MD5 before being written to disk

Confirm Root Password

Repeat the 'Root Password' to be sure it's right

Interface Name

Optional. The name of the resultant system's network interface. Typical values are bond0, eth4, etc. If bond0 is entered, a Link Aggregation Control Protocol bonding configuration will be written

The Link aggregation Wikipedia Page

Stream ISO

If this is 'yes', then the download will start immediately as the ISO is written directly to the socket connection from Traffic Ops. If this is 'no', then the download will begin only after the ISO has finished being generated. For almost all use cases, this should be 'yes'.

Traffic Ops uses Red Hat's Kickstart <https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/installation_guide/chap-kickstart-installations> to create these ISOs, so many configuration options not available here can be tweaked in the Kickstart configuration file <Creating-CentOS-Kickstart>.

User Admin

This section offers administrative functionality for users and their permissions.

The 'User Admin' Menu

User

This page lists all the users that are visible to the user (so, for 'admin' users, all users will appear here). Each entry in the table on this page has the following fields:

Full Name

The user's full, real name

Username

The user's username

Email

The user's email address

Tenant

The user's Tenant

Role

The user's Role

User management includes the ability to (where applicable):

• register a new user
• create a new user
• update an existing user
• view Delivery Services visible to a user

Note

If OAuth is enabled, the username must exist both here as well as with the OAuth provider. A user's rights are defined by the Role assigned to the user in Traffic Ops. Creating/deleting a user here will update the user's Role but the user needs to be created/deleted with the OAuth provider as well.

Tenants

Each entry in the table of Tenants on this page has the following entries:

Name

The name of the Tenant

Active

If 'true' users of this Tenant group are allowed to login and have active Delivery Services

Parent

The parent of this Tenant. The default is the 'root' Tenant, which has no users.

Tenant management includes the ability to (where applicable):

• create a new Tenant
• update an existing Tenant
• delete an existing Tenant
• view users assigned to a Tenant
• view Delivery Services assigned to a Tenant

Roles

Each entry in the table of Roles on this page has the following fields:

Name

The name of the Role

Privilege Level

The privilege level of this Role. This is a whole number that actually controls what a user is allowed to do. Higher numbers correspond to higher permission levels

Description

A short description of the Role and what it is allowed to do

Role management includes the ability to (where applicable):

• view all Roles
• create new Role

Note

Roles cannot be deleted through the Traffic Portal UI

Other

Custom menu items. By default, this contains only a link to the Traffic Control documentation.

The 'Other' Menu

Docs

This is just a link to the Traffic Control Documentation.

Custom Menu Items

This section is configurable in the traffic_portal_properties.json configuration file, in the customMenu section.