[breaking] feature: Added gRPC close signal to Monitor call (allo…

…ws graceful close of monitor) (#2276)

* Refactored gRPC Monitor API

* Added Close request to gRPC Monitor API

* Updated docs

* Made CreateEnvForDaeamon available in all integration tests

* Added integration test

* lint: avoid redefinition of the built-in function close

* lint: comparing with == will fail on wrapped errors. Use errors.Is to check for a specific error

* Allow up to 5 seconds for a pluggable monitor to gracefully close

* Made the gRPC daemon actually wait for port close completion

commands/daemon/daemon.go

@@ -20,6 +20,7 @@ import (
 	"errors"
 	"fmt"
 	"io"
+	"sync/atomic"
 
 	"github.com/arduino/arduino-cli/commands"
 	"github.com/arduino/arduino-cli/commands/board"
@@ -477,7 +478,11 @@ func (s *ArduinoCoreServerImpl) Monitor(stream rpc.ArduinoCoreService_MonitorSer
 		return err
 	}
 
-	portProxy, _, err := monitor.Monitor(stream.Context(), req)
+	openReq := req.GetOpenRequest()
+	if openReq == nil {
+		return &cmderrors.InvalidInstanceError{}
+	}
+	portProxy, _, err := monitor.Monitor(stream.Context(), openReq)
 	if err != nil {
 		return err
 	}
@@ -486,6 +491,10 @@ func (s *ArduinoCoreServerImpl) Monitor(stream rpc.ArduinoCoreService_MonitorSer
 	_ = syncSend.Send(&rpc.MonitorResponse{Success: true})
 
 	cancelCtx, cancel := context.WithCancel(stream.Context())
+	gracefulCloseInitiated := &atomic.Bool{}
+	gracefuleCloseCtx, gracefulCloseCancel := context.WithCancel(context.Background())
+
+	// gRPC stream receiver (gRPC data -> monitor, config, close)
 	go func() {
 		defer cancel()
 		for {
@@ -497,13 +506,20 @@ func (s *ArduinoCoreServerImpl) Monitor(stream rpc.ArduinoCoreService_MonitorSer
 				syncSend.Send(&rpc.MonitorResponse{Error: err.Error()})
 				return
 			}
-			if conf := msg.GetPortConfiguration(); conf != nil {
+			if conf := msg.GetUpdatedConfiguration(); conf != nil {
 				for _, c := range conf.GetSettings() {
 					if err := portProxy.Config(c.GetSettingId(), c.GetValue()); err != nil {
 						syncSend.Send(&rpc.MonitorResponse{Error: err.Error()})
 					}
 				}
 			}
+			if closeMsg := msg.GetClose(); closeMsg {
+				gracefulCloseInitiated.Store(true)
+				if err := portProxy.Close(); err != nil {
+					logrus.WithError(err).Debug("Error closing monitor port")
+				}
+				gracefulCloseCancel()
+			}
 			tx := msg.GetTxData()
 			for len(tx) > 0 {
 				n, err := portProxy.Write(tx)
@@ -519,8 +535,9 @@ func (s *ArduinoCoreServerImpl) Monitor(stream rpc.ArduinoCoreService_MonitorSer
 		}
 	}()
 
+	// gRPC stream sender (monitor -> gRPC)
 	go func() {
-		defer cancel()
+		defer cancel() // unlock the receiver
 		buff := make([]byte, 4096)
 		for {
 			n, err := portProxy.Read(buff)
@@ -538,6 +555,11 @@ func (s *ArduinoCoreServerImpl) Monitor(stream rpc.ArduinoCoreService_MonitorSer
 	}()
 
 	<-cancelCtx.Done()
-	portProxy.Close()
+	if gracefulCloseInitiated.Load() {
+		// Port closing has been initiated in the receiver
+		<-gracefuleCloseCtx.Done()
+	} else {
+		portProxy.Close()
+	}
 	return nil
 }

commands/daemon/term_example/main.go

@@ -89,8 +89,10 @@ func connectToPort(cli commands.ArduinoCoreServiceClient, instance *commands.Ins
 		log.Fatal("Error opening Monitor:", err)
 	}
 	if err := monitorClient.Send(&commands.MonitorRequest{
-		Instance: instance,
-		Port:     port,
+		Message: &commands.MonitorRequest_OpenRequest{OpenRequest: &commands.MonitorPortOpenRequest{
+			Instance: instance,
+			Port:     port,
+		}},
 	}); err != nil {
 		log.Fatal("Error sending Monitor config:", err)
 	}
@@ -106,9 +108,9 @@ func connectToPort(cli commands.ArduinoCoreServiceClient, instance *commands.Ins
 		}
 	}()
 
-	hello := &commands.MonitorRequest{
+	hello := &commands.MonitorRequest{Message: &commands.MonitorRequest_TxData{
 		TxData: []byte("HELLO!"),
-	}
+	}}
 	fmt.Println("Send:", hello)
 	if err := monitorClient.Send(hello); err != nil {
 		log.Fatal("Monitor send HELLO:", err)

commands/monitor/monitor.go

@@ -60,7 +60,7 @@ func (p *PortProxy) Close() error {
 
 // Monitor opens a communication port. It returns a PortProxy to communicate with the port and a PortDescriptor
 // that describes the available configuration settings.
-func Monitor(ctx context.Context, req *rpc.MonitorRequest) (*PortProxy, *pluggableMonitor.PortDescriptor, error) {
+func Monitor(ctx context.Context, req *rpc.MonitorPortOpenRequest) (*PortProxy, *pluggableMonitor.PortDescriptor, error) {
 	pme, release, err := instances.GetPackageManagerExplorer(req.GetInstance())
 	if err != nil {
 		return nil, nil, err

docs/UPGRADING.md

@@ -8,6 +8,65 @@ Here you can find a list of migration guides to handle breaking changes between
 
 We're dropping the `builtin.tools` support. It was the equivalent of Arduino IDE 1.x bundled tools directory.
 
+### The gRPC `cc.arduino.cli.commands.v1.MonitorRequest` message has been changed.
+
+Previously the `MonitorRequest` was a single message used to open the monitor, to stream data, and to change the port
+configuration:
+
+```proto
+message MonitorRequest {
+  // Arduino Core Service instance from the `Init` response.
+  Instance instance = 1;
+  // Port to open, must be filled only on the first request
+  Port port = 2;
+  // The board FQBN we are trying to connect to. This is optional, and  it's
+  // needed to disambiguate if more than one platform provides the pluggable
+  // monitor for a given port protocol.
+  string fqbn = 3;
+  // Data to send to the port
+  bytes tx_data = 4;
+  // Port configuration, optional, contains settings of the port to be applied
+  MonitorPortConfiguration port_configuration = 5;
+}
+```
+
+Now the meaning of the fields has been clarified with the `oneof` clause, making it more explicit:
+
+```proto
+message MonitorRequest {
+  oneof message {
+    // Open request, it must be the first incoming message
+    MonitorPortOpenRequest open_request = 1;
+    // Data to send to the port
+    bytes tx_data = 2;
+    // Port configuration, contains settings of the port to be changed
+    MonitorPortConfiguration updated_configuration = 3;
+    // Close message, set to true to gracefully close a port (this ensure
+    // that the gRPC streaming call is closed by the daemon AFTER the port
+    // has been successfully closed)
+    bool close = 4;
+  }
+}
+
+message MonitorPortOpenRequest {
+  // Arduino Core Service instance from the `Init` response.
+  Instance instance = 1;
+  // Port to open, must be filled only on the first request
+  Port port = 2;
+  // The board FQBN we are trying to connect to. This is optional, and  it's
+  // needed to disambiguate if more than one platform provides the pluggable
+  // monitor for a given port protocol.
+  string fqbn = 3;
+  // Port configuration, optional, contains settings of the port to be applied
+  MonitorPortConfiguration port_configuration = 4;
+}
+```
+
+Now the message field `MonitorPortOpenRequest.open_request` must be sent in the first message after opening the
+streaming gRPC call.
+
+The identification number of the fields has been changed, this change is not binary compatible with old clients.
+
 ### Some golang modules from `github.com/arduino/arduino-cli/*` have been made private.
 
 The following golang modules are no longer available as public API:

internal/arduino/monitor/monitor.go

@@ -292,7 +292,7 @@ func (mon *PluggableMonitor) Close() error {
 	if err := mon.sendCommand("CLOSE\n"); err != nil {
 		return err
 	}
-	_, err := mon.waitMessage(time.Millisecond*250, "close")
+	_, err := mon.waitMessage(time.Millisecond*5000, "close")
 	return err
 }
 

internal/cli/monitor/monitor.go

@@ -203,7 +203,7 @@ func runMonitorCmd(
 			}
 		}
 	}
-	portProxy, _, err := monitor.Monitor(context.Background(), &rpc.MonitorRequest{
+	portProxy, _, err := monitor.Monitor(context.Background(), &rpc.MonitorPortOpenRequest{
 		Instance:          inst,
 		Port:              &rpc.Port{Address: portAddress, Protocol: portProtocol},
 		Fqbn:              fqbn,

internal/integrationtest/arduino-cli.go

@@ -119,6 +119,21 @@ func NewArduinoCliWithinEnvironment(env *Environment, config *ArduinoCLIConfig)
 	return cli
 }
 
+// CreateEnvForDaemon performs the minimum required operations to start the arduino-cli daemon.
+// It returns a testsuite.Environment and an ArduinoCLI client to perform the integration tests.
+// The Environment must be disposed by calling the CleanUp method via defer.
+func CreateEnvForDaemon(t *testing.T) (*Environment, *ArduinoCLI) {
+	env := NewEnvironment(t)
+
+	cli := NewArduinoCliWithinEnvironment(env, &ArduinoCLIConfig{
+		ArduinoCLIPath:         FindRepositoryRootPath(t).Join("arduino-cli"),
+		UseSharedStagingFolder: true,
+	})
+
+	_ = cli.StartDaemon(false)
+	return env, cli
+}
+
 // CleanUp closes the Arduino CLI client.
 func (cli *ArduinoCLI) CleanUp() {
 	if cli.proc != nil {
@@ -596,3 +611,22 @@ func (inst *ArduinoCLIInstance) PlatformSearch(ctx context.Context, args string,
 	resp, err := inst.cli.daemonClient.PlatformSearch(ctx, req)
 	return resp, err
 }
+
+// Monitor calls the "Monitor" gRPC method and sends the OpenRequest message.
+func (inst *ArduinoCLIInstance) Monitor(ctx context.Context, port *commands.Port) (commands.ArduinoCoreService_MonitorClient, error) {
+	req := &commands.MonitorRequest{}
+	logCallf(">>> Monitor(%+v)\n", req)
+	monitorClient, err := inst.cli.daemonClient.Monitor(ctx)
+	if err != nil {
+		return nil, err
+	}
+	err = monitorClient.Send(&commands.MonitorRequest{
+		Message: &commands.MonitorRequest_OpenRequest{
+			OpenRequest: &commands.MonitorPortOpenRequest{
+				Instance: inst.instance,
+				Port:     port,
+			},
+		},
+	})
+	return monitorClient, err
+}

internal/integrationtest/daemon/daemon_concurrency_test.go

@@ -23,6 +23,7 @@ import (
 	"testing"
 	"time"
 
+	"github.com/arduino/arduino-cli/internal/integrationtest"
 	"github.com/arduino/arduino-cli/rpc/cc/arduino/cli/commands/v1"
 	"github.com/arduino/go-paths-helper"
 	"github.com/stretchr/testify/require"
@@ -31,7 +32,7 @@ import (
 func TestArduinoCliDaemonCompileWithLotOfOutput(t *testing.T) {
 	// See: https://github.com/arduino/arduino-cli/issues/2169
 
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	_, _, err := cli.Run("core", "install", "arduino:avr")

internal/integrationtest/daemon/daemon_test.go

@@ -37,7 +37,7 @@ import (
 func TestArduinoCliDaemon(t *testing.T) {
 	// See: https://github.com/arduino/arduino-cli/pull/1804
 
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -96,7 +96,7 @@ func TestArduinoCliDaemon(t *testing.T) {
 func TestDaemonAutoUpdateIndexOnFirstInit(t *testing.T) {
 	// https://github.com/arduino/arduino-cli/issues/1529
 
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -110,26 +110,11 @@ func TestDaemonAutoUpdateIndexOnFirstInit(t *testing.T) {
 	require.FileExists(t, cli.DataDir().Join("package_index.json").String())
 }
 
-// createEnvForDaemon performs the minimum required operations to start the arduino-cli daemon.
-// It returns a testsuite.Environment and an ArduinoCLI client to perform the integration tests.
-// The Environment must be disposed by calling the CleanUp method via defer.
-func createEnvForDaemon(t *testing.T) (*integrationtest.Environment, *integrationtest.ArduinoCLI) {
-	env := integrationtest.NewEnvironment(t)
-
-	cli := integrationtest.NewArduinoCliWithinEnvironment(env, &integrationtest.ArduinoCLIConfig{
-		ArduinoCLIPath:         integrationtest.FindRepositoryRootPath(t).Join("arduino-cli"),
-		UseSharedStagingFolder: true,
-	})
-
-	_ = cli.StartDaemon(false)
-	return env, cli
-}
-
 func TestDaemonCompileOptions(t *testing.T) {
 	// See: https://github.com/arduino/arduino-cli/issues/1614
 	// See: https://github.com/arduino/arduino-cli/pull/1820
 
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -203,7 +188,7 @@ func TestDaemonCompileOptions(t *testing.T) {
 func TestDaemonCompileAfterFailedLibInstall(t *testing.T) {
 	// See: https://github.com/arduino/arduino-cli/issues/1812
 
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -233,7 +218,7 @@ func TestDaemonCompileAfterFailedLibInstall(t *testing.T) {
 }
 
 func TestDaemonCoreUpdateIndex(t *testing.T) {
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -269,7 +254,7 @@ func TestDaemonCoreUpdateIndex(t *testing.T) {
 }
 
 func TestDaemonBundleLibInstall(t *testing.T) {
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -409,7 +394,7 @@ func TestDaemonLibrariesRescanOnInstall(t *testing.T) {
 		   with the gprc instance
 		The last attempt is expected to not raise an error
 	*/
-	env, cli := createEnvForDaemon(t)
+	env, cli := integrationtest.CreateEnvForDaemon(t)
 	defer env.CleanUp()
 
 	grpcInst := cli.Create()
@@ -465,7 +450,7 @@ func TestDaemonCoreUpgradePlatform(t *testing.T) {
 
 	t.Run("upgraded successfully with additional urls", func(t *testing.T) {
 		t.Run("and install.json is present", func(t *testing.T) {
-			env, cli := createEnvForDaemon(t)
+			env, cli := integrationtest.CreateEnvForDaemon(t)
 			defer env.CleanUp()
 
 			grpcInst := cli.Create()
@@ -481,7 +466,7 @@ func TestDaemonCoreUpgradePlatform(t *testing.T) {
 			require.False(t, platform.GetRelease().GetMissingMetadata()) // install.json is present
 		})
 		t.Run("and install.json is missing", func(t *testing.T) {
-			env, cli := createEnvForDaemon(t)
+			env, cli := integrationtest.CreateEnvForDaemon(t)
 			defer env.CleanUp()
 
 			grpcInst := cli.Create()
@@ -504,7 +489,7 @@ func TestDaemonCoreUpgradePlatform(t *testing.T) {
 
 	t.Run("upgrade failed", func(t *testing.T) {
 		t.Run("without additional URLs", func(t *testing.T) {
-			env, cli := createEnvForDaemon(t)
+			env, cli := integrationtest.CreateEnvForDaemon(t)
 			defer env.CleanUp()
 
 			grpcInst := cli.Create()
@@ -524,7 +509,7 @@ func TestDaemonCoreUpgradePlatform(t *testing.T) {
 			require.False(t, platform.GetRelease().GetMissingMetadata()) // install.json is present
 		})
 		t.Run("missing both additional URLs and install.json", func(t *testing.T) {
-			env, cli := createEnvForDaemon(t)
+			env, cli := integrationtest.CreateEnvForDaemon(t)
 			defer env.CleanUp()
 
 			grpcInst := cli.Create()