Add devices Teckin SP20 US and ZooZee SA102, my first github fork and pull request... #4481
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Both look like BlitzWolf with relay at GPIO04 instead of GPIO15
mrMikeWatson
changed the title
mrMikeWatson
changed the title
|
Aren't they both the same? Did you check they are different from already defined ones? Every entry in this table costs flash memory and in the end will fail gui due to out of Ram. |
|
Yes, the same.
So could take up one shared slot.
Name was limited to 15 char so I split into 2.
Yes, checked others, but found no energy monitor like Blitzwolf that
appeared to have relay at GPIO04.
Thanks for taking the time to look at this.
Please reject as you see fit.
Thank you for your great piece of software by the way!
Regards,
Mike
…On Thu, Nov 29, 2018 at 2:31 AM Theo Arends ***@***.***> wrote:
Aren't they both the same? Did you check they are different from already
defined ones?
Every entry in this table costs flash memory and in the end will fail gui
due to out of Ram.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<#4481 (comment)>,
or mute the thread
<https://github.com/notifications/unsubscribe-auth/AZwvHQ6_e6P1PIAvl7UfzlS1z7TH5y59ks5uz5tWgaJpZM4Y4zSK>
.
|
|
Will use info to add Teckin US to template. Thx. |
arendst
added a commit
that referenced
this pull request
Nov 29, 2018
Add support for Teckin US Wifi Smart Switch with Energy Monitoring (#4481)
wienerdogracing
added a commit
to wienerdogracing/Sonoff-Tasmota
that referenced
this pull request
Dec 31, 2018
* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result
wienerdogracing
added a commit
to wienerdogracing/Sonoff-Tasmota
that referenced
this pull request
Dec 31, 2018
* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result
wienerdogracing
added a commit
to wienerdogracing/Sonoff-Tasmota
that referenced
this pull request
Dec 31, 2018
* PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result
wienerdogracing
added a commit
to wienerdogracing/Sonoff-Tasmota
that referenced
this pull request
Dec 31, 2018
* Release 6.2.0 Release 6.2.0 * Prep release * Prep release * Visual Studio Code adds * Added Timeprop and PID * Merge to 6.4.1 (#1) (#2) * PS_16_DZ: GPIO13 => LED1 * PS_16_DZ: cleanup code * Add Command CalcRes * Update settings.ino * Update decode-config.py * Add SetOption59 info Add SetOption59 info * decode-config.py: add 6.3.0.11 to .14 settings * Add dynamic buffer space Make serial buffer space reservation dynamic * Add dynamic buffer space Add dynamic buffer space * Fix dynamic buffer handling Fix dynamic buffer handling * Move static to dynamic buffers * Add support for SM Smart Wifi Dimmer PS-16-DZ (arendst#4465) * Move some static (serial) buffers to dynamic buffers * Prep for Software SPI Prep for Software SPI used by some displays * PS_16_DZ: only update brightness if it actually changed * PS_16_DZ: reduce buffer-size and actually check for overflow * PS_16_DZ: optimize for size * PS_16_DZ: further optimization * PS_16_DZ: leave space for trailing 0-byte * Hass: Restart if topic is changed * PS_16_DZ: cleanup * Fix possible overflow situation Fix possible overflow situation * Small improvements to Hass MQTT discovery * Add support for Teckin US Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481) * Update display and epaper drivers Update display and epaper drivers * switch to using NewPing lib directly for sr04 add NewPing-1.9.1 lib * Housekeeping * Upd settings.ino - set sleep=0 when SetOption36>0 Update settings.ino - set sleep=0 when SetOption36>0 * Prevent sleep and SetOption36 being used concurrently Prevent sleep and SetOption36 being used concurrently * Fix sleep->SetOption36 transition * Update fr-FR.h Synced with changes since v6.2.1.7 * Merge sleep command * Bump version to 0x0603000F Bump version to 0x0603000F to make sure new sleep command takes effect on 50 as default for upgrades where sleep is < 50. * Update support_wifi.ino * 6.3.0.15 Update dynamic sleep 6.3.0.15 20181201 * Removed command SetOption36 (arendst#4497) * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (arendst#4497) * Update with dynamic sleep flag * Added Support for ButtonN and SwitchN * RULES: Added BREAK as an alternative ENDON RULES: Added BREAK as an alternative ENDON that will stop the execution of the following rules. If a rule that ends with BREAK, is triggered, then the following rules of that set will not be executed. This is useful for cases like: arendst#4477 * Update xsns_22_sr04.ino * RULES: Added BREAK as an alternative ENDON * Delete duplicated min and max functions * Update README.md * Update _changelog.ino * Further improve Hass auto discovery * Add dummy soft_spi_flg to satisfy compiler @arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support. * decode-config.py: add new settings - add 6.3.0.15 setting change - adapt 6.3.0.13 setting change * Add GPIO2 for Sonoff Basic Template Add GPIO2 for Sonoff Basic Template * Add support for GPIO02 for newer Sonoff Basic Add support for GPIO02 for newer Sonoff Basic * Fix Compilation issue with STAGE Core Now the Stage core has the the same STR macro defined in sonoff.h. * Create RF-Bridge-EFM8BB1-20181127.hex ignore RF pulses < 100µs, increased uart RX buffer -> stopp red led flashing * Announce switches * Final fix compile error (arendst#4509) Final fix soft_spi_flg compile error (arendst#4509) * Fix logic for ON/OFF vs TOGGLE * Initial translation to Swedish * Added Key to select Swedish Translation * Added Swedish to Precompiled bins * Added missing " * Matched the order of days with Tasmota Timers * Update platformio.ini Support for enable / disable exceptions code in firmware for esp8266 core 2.5.0 (stage) or up * localization for Polish - KNX, timers, etc. * Add Domoticz Selector for Fanspeed Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Update sonoff.ino * 6.3.0.16 - Bump version 6.3.0.16 20181201 * Add support for iFan02 Fanspeed in Domoticz using a selector (arendst#4517) * Add Announce Switches to MQTT Discovery (arendst#4531) * Fix Domoticz Fanspeed Fix Domoticz Fanspeed * MCP230xx - Add Interrupt Retain * MCP230xx driver - add interrupt retention MCP230xx driver - add interrupt retention over teleperiod. * Fix HASS discovery of switches * Announce RGBW light, add 'White' command * Enabled forced local operation when button- or switchtopic is set * Update Hass discovery * v2.1.0012 decode-config.py: add new settings - add 6.3.0.16 setting change * decode-config.py: add new settings - add 6.3.0.16 setting change * Fix reversed logic when announcing buttons / switches * add DMP mode to MPU-6050 * fix compile issue on ESP8266 * Clean and shrink lights Clean and shrink lights * Add support for device registry * Update my_user_config.h * Fix Warning in Platformio if building MPU and KNX together * USE_MPU6050_DMP moved to my_user_config.h * USE_MPU6050_DMP moved to my_user_config.h * Corrected Domoticz Temp published from MPU6050 * decode-config.py: add new settings - add SetOption61 from PR arendst#4562 * Update my_user_config.h * Fix language file Fix language file * 6.3.0.17 Add features 6.3.0.17 20181211 * Add support for TheoV2 sensors as documented on https://sidweb.nl * Add support for SDM220 (arendst#3610) * Enhance support for MPU6050 using DMP (arendst#4581) * add manzuko "power strip" * Add more support * Add support for decoding Theo V2 sensors as documented on https://sidweb.nl using 434MHz RF sensor receiver * Add support for decoding Alecto V2 sensors like ACH2010, WS3000 and DKW2012 using 868MHz RF sensor receiver * Add support for Manzoku Power Strip (arendst#4590) * Updated Spanish Translation * Update de-DE.h * More tweak of Hass switch/button * Update fr-FR.h Added SDM220 new strings * Update fr-FR.h SDM220 strings reworked to fit in the space available * initial work on range-support * mqtt messages updated * Publish state message when changing effect * decode-config.py: Fix `@v` filename template (arendst#4609) - fix restore filename auto extension * add debug code to show final command sequence * correcting memcpy calls * Add TheoV2 sensor source Add TheoV2 sensor source and information used with Rf Sensor * Add LwIP 2 no features (Low Flash) * Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible) arendst#4619 * Fix ArduinoOTA for Core 2.5.0 Fix ArduinoOTA for Core 2.5.0 * Fix HomeAssistant Temp Sensor AutoDiscovery arendst#4627 * New 2.5.0-2 toolchain does not like uncast bitwise The new toolchain (2.5.0-2) used from core 2.5.0 does not want bitwise operations to be performed on non-integer variables so we cast the double used in send_2byte_float() to a (long) as it should be. * Fix NewPing-1.9.1 library.properties Fix NewPing-1.9.1 library.properties to avoid compiler warning about possibly not supporting ESP8266 whereas we know now that it does. This causes the compiler warning (which may alarm some users unnecessarily) that NewPing claims to run on avr and stm32. * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for release Prep for release * Updates for release 6.4.0 Updates for release 6.4.0 * Updates for release 6.4.0 Updates for release 6.4.0 * Prep for merge * 6.4.0.1 New dev release * Removing duplicate entrys Options for core 2.5.0 where duplicated * Update README.md * Create boards.txt * Create platform.txt * No exceptions * it-IT language updated * option for firmware directory added * Ease selecting core versions Ease selecting core versions by grouping core parameters together. Select core version in group [core_active] * webserver: swap index and name in module configuration * Tune driver RF Sensor - Free memory when driver RF Sensor is compiled but not used. - Fix possible buffer overflow exceptions - Add rule and hardware info to source * introduce new api-call for dimmer-devices * SerialLog: output CR + LF instead of just LF * Update linker files Update linker files to released linker files for coe 2.4.2 and up * Add sk-SK language * Update bg-BG.h * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Add support for AZ-Instrument 7798 CO2 meter/datalogger. * Revert platformio.ini and my_user_config to original version, adding line for new sensor but leaving it commented out. * Include changes from original into sonoff/language/bg-BG.h * Updated from originals: platformio.ini, sonoff/my_user_config.h. * Revert to original RELEASENOTES.md. * Add void to functions without parameters * Fix temperature conversion Fix temperature conversion to still use ConvertTemp() even if meter sends the value in F * Add support for AZ-Instrument 7798 CO2 Add support for AZ-Instrument 7798 CO2 meter/datalogger * pressure unit of measure reporting Added a dedicated pressure sensor management to report back as pressure sensor and not fallback as a generic sensor in HA autodiscovery process * add missing units of measurements for energy * removed some errors from copy pasting.. * add empty unit of measurement for any sensors * Added option for checking mqtt tls against root ca Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Change RAM usage BMP/BME Change RAM usage BMP/BME I2C sensors * Update Arduino IDE core 2.5.0 files Update Arduino IDE core 2.5.0 files * Fix wifi strongest signal detection Fix wifi strongest signal detection (arendst#4704) * 6.4.0.2 Fix possible dtostrf bos 6.4.0.2 20181221 * Fix possible dtostrf buffer overflows by increasing buffers * Still need patched PWM for core 2.5.0 Still need patched PWM for core 2.5.0 * Check for core version when enabling tls ca cert Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Check for core version when enabling tls ca cert, changed names of defines Signed-off-by: Frank Meies <19324766+fmeies@users.noreply.github.com> * Remove SetOption55 (hass_short_discovery_msg) * Rename HASS discovery string constants * Remove Alexa message "this value is outside the range of the device" * 6.4.0.3 Hass and Alexa fixes 6.4.0.3 20181222 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (arendst#4711) * Change FallbackTopic detection (arendst#4706) * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (arendst#4673) * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (arendst#3159, arendst#4712) * Add optional TLS_CA_CERT Add define USE_MQTT_TLS_CA_CERT for checking MQTT TLS against root ca using Let's Encrypt cert from sonoff_letsencrypt.h - not supported with core 2.3.0 (arendst#4703) * decode-config.py: adapt settings change - remove SetOption55 (hass_short_discovery_msg) * Change FallbackTopic Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (arendst#1528) * PS_16_DZ: fix broken if-statement * Change MQTT GUI password handling Change MQTT GUI password handling (arendst#4723) * Release 6.4.1 * 6.4.1.1 Fix most compiler warnings 6.4.1.1 20181224 * Fix most compiler warnings * Fix compiler warning Fix compiler warning * Change switch debounce Change switch input detection by optimizing switch debounce (arendst#4724) * Add INPUT_PULLUP option for single DS18B20 * Add variable %timestamp% to be used in rules This PR adds a new variable %timestamp% to be used in a rule to allow the user to include the Time Stamp as Tasmota has for Status, Sensors, etc, for example: Command: publish stat/topic/sensor {"Time":"%timestamp%","mysensor":"%var1%"} Output: {"Time":"2018-12-27T12:52:57","mysensor":"1"} (arendst#4734) * 6.4.1.2 Rewrite Switch driver 6.4.1.2 20181228 * Change switch driver making it modular and introduce input filter (arendst#4665, arendst#4724) * Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (arendst#4738) * Add variable %timestamp% to rules (arendst#4749) * Update platformio.ini with stage Update platformio.ini with latest stage option * Prep for template tuning * 6.4.1.3 Change sonoff_template.h 6.4.1.3 20181229 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs * Fix Typo in Spanish Translation * Fix MGC3130/AZ7798 compile error * Add debugging options to Switch Add more debugging options to Switch using SwitchDebounce * Fix DS3231 driver Fix DS3231 driver breaking function chain (arendst#4759) * Disable unused feature * Revert "Disable unused feature" This reverts commit 8fe61f6. * Add test for result usage * Add tests for result
gemu2015
pushed a commit
to gemu2015/Sonoff-Tasmota
that referenced
this pull request
Jan 27, 2019
Add support for Teckin US Wifi Smart Switch with Energy Monitoring (arendst#4481)
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Both look like BlitzWolf with relay at GPIO04 instead of GPIO15