RingWide

There are 2 ways to play Ring system games (Ringwide/Ringedge/etc...) :

• Using TeknoParrot
• Using JConfig

TeknoParrot has now built-in RAW input support, DemulShooter is not needed anymore to play Ring games with it.
That's why TeknoParrot compatibility was removed since 10.3.0 update of DemulShooter

Following guide will be for JConfig usage and configuration.
As JConfig can't save changed from SYSTEM and TEST menus in these game, I've made quick tools to replace these SERVICE and TEST menus. You can find them here

Let's go Island

Last JConfig version tested : LetsGoIsland_2020_02_05

Usage :

1. Unpack the game and Jconfig files, and run the JconfigLGI.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and Triggers buttons so you can leave them empty.

3. Go to JConfig “Settings” and make sure “Mouse Active” is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Run DemulShooter for this system :
   DemulShooter.exe -target=ringwide -rom=lgi

5. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
lgi	Trigger	TriggerR	TriggerR

Let's go Island 3D

Last JConfig version tested : LetsGoIsland3D_2020_01_13

Usage :

1. Unpack the game and Jconfig files, and run the JconfigLGI3D.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and Triggers buttons so you can leave them empty.

3. Go to JConfig Settings and make sure Mouse Active is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Run DemulShooter for this system:
   DemulShooter.exe -target=ringwide -rom=lgi3d

5. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
lgi3d	Trigger	TriggerR	TriggerR

Operation G.H.O.S.T

Last JConfig version tested : OperationG.H.O.S.T_2020_01_09

Usage :

1. Unpack the game and Jconfig files, and run the JconfigOG.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and gameplay buttons so you can leave them empty.

3. Go to JConfig Settings and make sure Mouse Active is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Still in JConfig Settings, make sure JVS emulation is checked.

5. Open the gs2.ini file and change the following lines to :
   EnableJvs=1
EnableAMLib=0
EnableInputDevices=0

6. Run DemulShooter for this system:
   DemulShooter.exe -target=ringwide -rom=og

7. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
og	Trigger	Change Weapon	Action & Reload

Misc. Notes :

• You can sassign a separate key for the ACTION command in DemulShooter_GUI

• Operation G.H.O.S.T is working without JConfig. Just open the gs2.ini file and change the following lines to :
  EnableJvs=0
EnableAMLib=0
EnableLedBoard=0
EnableInputDevices=1

You can then run the game (the original gs2.exe) as a standalone, without the need of JConfig.

• Be aware that without JVS emulation enabled, the game won't activate outputs (Recoil, etc...)*

Operation G.H.O.S.T original keys control are :

Keyboard Key(s)	Action
CTRL+F1	Coin
ENTER	Start P1
NumPad [+]	Start P2
Y	Service

SEGA Dream Raider

Last JConfig version tested : DreamRaiders_2020_01_09

Usage :

1. Unpack the game and Jconfig files, and run the JconfigSDR.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and Triggers buttons so you can leave them empty.

3. Go to JConfig Settings and make sure Mouse Active is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Run DemulShooter for this system:
   DemulShooter.exe -target=ringwide -rom=sdr

5. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
sdr	Trigger	TriggerR	/

SEGA Golden Gun

Last JConfig version tested : GoldenGun_2020_01_09

Usage :

1. Unpack the game and Jconfig files, and run the JconfigGG.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and Triggers buttons so you can leave them empty.

3. Go to JConfig Settings and make sure Mouse Active is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Run DemulShooter for this system:
   DemulShooter.exe -target=ringwide -rom=sgg

5. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
sgg	Trigger	/	Reload

Transformers : Human Alliance

Last JConfig version tested : TransformersHA_2020_02_04

Usage :

1. Unpack the game and Jconfig files, and run the JconfigTR.exe

2. Set your Start, Service, and other buttons as needed in Jconfig.
   DemulShooter will handle Axis and Triggers buttons so you can leave them empty.

3. Go to JConfig “Settings” and make sure “Mouse Active” is unchecked.
   This does not prevent DemulShooter to work but if the mouse is active it will stay captured in the window and it may be disturbing later if some kind of wrapping/full-screen program is created.
   This is my preference but it’s optionnal...

4. Run DemulShooter for this system:
   DemulShooter.exe -target=ringwide -rom=tha

5. Just play the game, no calibration is needed.

Controls :

RingWide Controls
ROM	LEFT CLIK	MIDDLE CLICK	RIGHT CLICK
tha	Trigger	Trigger	/

Misc. Bugs :

• Trigger will not validate letters when player is asked to write is name for score at the end
• Trigger will not validate path selection in-game (player has to point to the path and wait for the timer to end)