DC/OS Docker

Run DC/OS in Docker containers!

Each container on the host emulates a DC/OS node, using Docker-in-Docker to run DC/OS jobs & services.

DC/OS Docker is designed to optimize development cycle time. For a more production-like local experience, see DC/OS Vagrant which runs each node in its own VM.

Issue Tracking

• Issue tracking is in DCOS JIRA.
• Remember to make a DC/OS JIRA account and login so you can get update notifications!

Caveats

• Because of Docker-in-Docker, DC/OS services (like Jenkins) that themselves use Docker-in-Docker may not work correctly.
• Because containerization does not affect resource detection tools, each DC/OS node will think it can allocate all of the host's resources, leading to over-subscription without protection. You are still bound by the disk and memory constraints of the host, even if DC/OS thinks you have N (number of agent nodes) times more. Running Docker in a VM can protect your host from this and allows you to designate how much disk/memory/cpu DC/OS gets in total. Running Docker directly on a Linux host gives DC/OS more resources to play with but may also freeze your machine if you run too many DC/OS services/jobs.

Requirements

DC/OS Docker can be run on Linux, macOS, or on Linux in a VM using Vagrant with VirtualBox. The support for macOS as a host is experimental.

Host Docker storage drivers of overlay and aufs are supported automatically. For anything else, see Storage Driver for config instructions.

Linux

• systemd (recommended) or no systemd (experiemental)
• A recent kernel that supports Overlay FS
• Docker 1.13.1+
• make
• git

Mac

NOTE: Docker for Mac support is experimental. Use Vagrant for a better tested configuration.

• Docker for Mac 1.13.1+
  • 6GB Memory (recommended). See Docker for Mac advanced config for more details.
• make
• git

Vagrant

• VirtualBox 5.1.18+
• Vagrant 1.9.3+
• git

Setup

1. Clone this repo:

   git clone https://github.com/dcos/dcos-docker
   cd dcos-docker

2. Download DC/OS or Enterprise DC/OS into the root of the dcos-docker repo directory.

   For example, download the latest stable release:

   make installer

3. (Mac-only) Modify the DC/OS installer to support BSD sed:

   sed -i"" -E -e 'H;1h;$!d;x' -e "s/sed '0,/sed '1,/" dcos_generate_config.sh

   See Mac Compatible installers for more details.

4. (Vagrant-only) Bring up the Virtual Machine with a chosen disk size.

   Vagrant disks are sparse and as such they will only use the space that is actually used.

   DC/OS should deploy with a size of 100GB, but for larger deployments you may need to increase the size of the VM.

   The first argument is the desired disk size in MB (ex: 102400 is 100GB).

   vagrant/resize-disk.sh 102400

5. (Vagrant-only) SSH into the virtual machine:

   vagrant ssh

Deploy

1. Deploy DC/OS in Docker:

   make

2. (Optional) Wait for DC/OS to come up:

   make postflight

For other make commands, see make help.

DC/OS Login

DC/OS uses OAuth for authentication, configured through Auth0 by default.

Use a Google, Github, Microsoft email account to authenticate.

Enterprise DC/OS Login

Enterprise DC/OS uses built-in identity and access management (IAM), instead of OAuth.

For dcos-docker, the superuser account is pre-configured:

• Username: admin
• Password: admin

Network Routing

By default with Vagrant or Docker for Mac, containers are not reachable from the host. This will prohibit SSHing into a container (not docker exec) and viewing the DC/OS GUI in a browser. However, there are a few workarounds described below.

Vagrant

To make the Docker containers in the VM reachable from the host, you can route Docker's IP subnet (172.17.0.0/16) through the VM's IP (192.168.65.50). This routing is not required if you deployed DC/OS to Docker on a native Linux host.

Execute the following on the host machine. Once routing is set up, you can access DC/OS directly from the host.

Setup

On Linux:

$ sudo ip route replace 172.17.0.0/16 via 192.168.65.50

On macOS:

$ sudo route -nv add -net 172.17.0.0/16 192.168.65.50

Cleanup

On Linux:

$ sudo ip route del 172.17.0.0/16

On macOS:

$ sudo route delete 172.17.0.0/16

Docker for Mac

HyperKit (the hypervisor used by Docker for Mac) does not currently support IP routing on Mac.

Use one of the following alternative solutions instead:

• docker-mac-network sets up a VPN running in containers and uses a VPN client to route traffic to other containers.
• Docker for Mac - Host Bridge uses a kernel extension to add a new network interface and Docker network bridge.

Node Shell Access

With network routing configured, you can SSH directly into DC/OS nodes from the host:

host$ ssh -i genconf/ssh_key root@172.17.0.2

Or you can SSH with the DC/OS CLI:

$ dcos node ssh --leader --user=root --option IdentityFile=genconf/ssh_key

From the host (or SSH'd into Vagrant) you can also use Docker exec to open a shell:

$ docker ps --format="table {{.ID}}\t{{.Names}}\t{{.Status}}"
CONTAINER ID        NAMES                   STATUS
7498dcbe4e3e        dcos-docker-pubagent1   Up About a minute
b66175f0a18a        dcos-docker-agent1      Up About a minute
e80466ce71c9        dcos-docker-master1     Up About a minute

$ docker exec -it dcos-docker-master1 bash

Storage Driver

By default, the docker daemon in the DC/OS node containers is configured to use the same storage driver as the host docker daemon, but this method is only verified to work for aufs and overlay. Other storage drivers may work, but are not tested. They can be configured manually by setting the DOCKER_STORAGEDRIVER make variable.

To check the current host storage driver, use docker info --format "{{json .Driver}}".

Loopback

The loopback devicemapper storage driver may cause loopback devices to not be properly cleaned up and thus prevent the docker daemon from starting. YMMV though.

Overlay2

Newer versions of docker (17+) default to the overlay2 storage driver. Since overlay2 is not supported by Docker 1.11.2 (the default version in the "node" containers), you must also specify a newer version of Docker to use in the "node" containers:

make DOCKER_STORAGEDRIVER=overlay2 DOCKER=1.13.1

Alternatively, Docker itself can be configured to use overlay.

To configure Docker for Mac, go to Docker > Preferences > Daemon Advanced, add "storage-driver" : "overlay" to the configuration file, and click Apply & Restart.

To configure other versions of Docker, see the Docker docs appropriate to your version.

Settings

Changing the number of masters or agents

This defaults to 1 master and 1 agent. You can change the number of masters by setting the variable MASTERS. You can change the number of agents by setting the variable AGENTS. For example:

# start a cluster with 3 masters and 5 agents
$ make MASTERS=3 AGENTS=5

Changing the distro

NOTE: This feature should only be used for testing, it is unstable.

By default the cluster will be spun up using a centos base image but if you want to test something else you can run:

$ make DISTRO=fedora

Non-systemd host

By default, systemd is used on the host to create a systemd slice. This is the supported configuration.

It is possible to run DC/OS Docker on hosts without systemd. Set the variable MESOS_SYSTEMD_ENABLE_SUPPORT to false to disable systemd on the host. This changes a Mesos setting. Although this setting works at the time of writing, it is not officially supported by DC/OS and so this feature is experimental.

One problem which may occur when not using systemd on the host is that executors and tasks will be killed when the agent is restarted. A JIRA issue tracks making it possible to run DC/OS Docker in a supported manner without systemd.

Docker version

By default the "node" containers will include Docker 1.11.2. Docker 1.13.1 is also supported, but must be configured:

$ make DOCKER_VERSION=1.13.1

One reason to use Docker 1.13.1 might be to use the overlay2 storage driver, which is not supported by Docker 1.11.2. See Storage Driver for details.

Github Pull Request (PR) Labels

Various labels used on pull requests and what they mean

• Work in progress The code is a work in progress / not yet ready to be reviewed or acted upon by others. It can be handy to open up a PR in order to share work / ideas with others. Use this label to indicate the PR isn't intended to be reviewed or merged.
• Request for comment The code is some idea which may or may not land, but there are questions if the approach is right. Review should focus on whether or not it is overall a good idea to do this and how to structure it.
• Ready for review The author thinks the PR is ready to land, and is looking for a review in order to get it in. The PR may bounce back to "work in progress" or "request for comment" if it needs more work or discussion. Might also just do all the review and fixup with the label attached.

Mac Compatible Installers

DC/OS installers are not immediately compatible with the BSD sed that ships with macOS. This will be fixed in a future release of DC/OS: dcos/dcos#1571 . For now, use one of the following options:

1. Modify the installer with the following script:

   sed -i"" -E -e 'H;1h;$!d;x' -e "s/sed '0,/sed '1,/" dcos_generate_config.sh
   

2. Install GNU sed with Homebrew:

   brew install gnu-sed --with-default-names
   

   Warning: This method will make GNU sed the default sed, which may have unforeseen side-effects.

Troubleshooting

See the troubleshooting document for details.