-
Notifications
You must be signed in to change notification settings - Fork 54
Quick Start Guide
NOTE: For the latest online instructions, troubleshooting tips and support go to: beagleboard.org/getting-started.
NOTE: Usage of Chrome or Firefox web browsers is recommended.
NOTE: By default, the boards may run warm and shutdown. Please keep adequate ventilation on your board and update your software.
-
Connect a USB type-C cable to BeagleBone® AI USB type-C port.
-
Connect the other end of the USB cable to the PC USB 3 port.
-
BeagleBone® AI will boot.
-
Look for a new mass storage drive to appear on the PC.
-
Open the drive and open START.HTM with your web browser.
-
Follow the instructions in the browser window.
-
Connect a combo keyboard and mouse to BeagleBone® AI's USB host port.
-
Connect a microHDMI-to-HDMI cable to BeagleBone® AI's microHDMI port.
-
Connect the microHDMI-to-HDMI cable to an HDMI monitor.
-
Plug a 5V 3A USB type-C power supply into BeagleBone® AI's USB type-C port.
-
BeagleBone® AI will boot. No need to enter any passwords.
-
Desktop will appear on the monitor. Click the "Getting Started" icon.
-
Follow the instructions in the browser window.
-
Plug a 5V 3A USB type-C power supply into BeagleBone® AI's USB type-C port.
-
BeagleBone® AI will boot.
-
Connect your PC's WiFi to SSID "BeagleBone-XXXX" where XXXX varies for your BeagleBone® AI.
-
Use password "BeagleBone" to complete the WiFi connection.
-
Open http://192.168.8.1 in your web browser.
-
Follow the instructions in the browser window.