[Camera Support]: Pelco D6230 PTZ #11087
Answered
by
therokh
therokh
asked this question in
Camera Support
-
Describe the problem you are havingHi, I have a Pelco D6230 PTZ camera. I've got it connected to Frigate to try out the autotracking system. The Frigate UI shows the PTZ controls but these don't move the camera. Zoom also doesn't work. I have tried to move camera to preset but this also doesn't work, but I don't think I've set that up correctly on the camera side. Version0.13.2-6476f8a Frigate config filecameras:
ptz:
onvif:
host: 10.0.0.28
port: 80
user: user
password: password
ffmpeg:
inputs:
- path: rtsp://user:password@10.0.0.28:554/stream2
roles:
- detectRelevant log outputNoneFFprobe output from your cameraffprobe version 6.1.1 Copyright (c) 2007-2023 the FFmpeg developers
built with gcc 13 (GCC)
configuration: --prefix=/usr --bindir=/usr/bin --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man --arch=x86_64 --optflags='-O2 -flto=auto -ffat-lto-objects -fexceptions -g -grecord-gcc-switches -pipe -Wall -Wno-complain-wrong-lang -Werror=format-security -Wp,-U_FORTIFY_SOURCE,-D_FORTIFY_SOURCE=3 -Wp,-D_GLIBCXX_ASSERTIONS -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1 -fstack-protector-strong -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer' --extra-ldflags='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now -specs=/usr/lib/rpm/redhat/redhat-hardened-ld -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -Wl,--build-id=sha1 ' --extra-cflags=' -I/usr/include/rav1e' --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvo-amrwbenc --enable-version3 --enable-bzlib --enable-chromaprint --disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt --enable-gnutls --enable-ladspa --enable-libaom --enable-libdav1d --enable-libass --enable-libbluray --enable-libbs2b --enable-libcodec2 --enable-libcdio --enable-libdrm --enable-libjack --enable-libjxl --enable-libfreetype --enable-libfribidi --enable-libgsm --enable-libilbc --enable-libmp3lame --enable-libmysofa --enable-nvenc --enable-openal --enable-opencl --enable-opengl --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-libplacebo --enable-librsvg --enable-librav1e --enable-librubberband --enable-libsmbclient --enable-version3 --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libsvtav1 --enable-libtesseract --enable-libtheora --enable-libtwolame --enable-libvorbis --enable-libv4l2 --enable-libvidstab --enable-libvmaf --enable-version3 --enable-vapoursynth --enable-libvpx --enable-vulkan --enable-libshaderc --enable-libwebp --enable-libx264 --enable-libx265 --enable-libxvid --enable-libxml2 --enable-libzimg --enable-libzmq --enable-libzvbi --enable-lv2 --enable-avfilter --enable-libmodplug --enable-postproc --enable-pthreads --disable-static --enable-shared --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64 --enable-lto --enable-libvpl --enable-runtime-cpudetect
libavutil 58. 29.100 / 58. 29.100
libavcodec 60. 31.102 / 60. 31.102
libavformat 60. 16.100 / 60. 16.100
libavdevice 60. 3.100 / 60. 3.100
libavfilter 9. 12.100 / 9. 12.100
libswscale 7. 5.100 / 7. 5.100
libswresample 4. 12.100 / 4. 12.100
libpostproc 57. 3.100 / 57. 3.100
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 76 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 76 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 76 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 76 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 19
[h264 @ 0x564baaf06340] SEI type 5 size 77 truncated at 20
Last message repeated 20 times
Input #0, rtsp, from 'rtsp://10.0.0.28:554/stream2':
Metadata:
title : Session streamed by "Pelco Streaming Server"
comment : stream2
Duration: N/A, start: 0.034917, bitrate: N/A
Stream #0:0: Audio: pcm_mulaw, 12000 Hz, mono, s16, 96 kb/s
Stream #0:1: Video: h264 (High), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 30 fps, 29.97 tbr, 90k tbnFrigate statsNo response Operating systemOther Linux Install methodDocker Compose Coral versionCPU (no coral) Network connectionWired Camera make and modelPelco D6230 Any other information that may be helpfulNo response |
Beta Was this translation helpful? Give feedback.
Answered by
therokh
Apr 24, 2024
Replies: 5 comments 2 replies
-
|
Can you enable debug logs in your config, restart Frigate, and paste the initial startup output here? |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Debug log here. I also tried clicking the move/presets again. |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
What's your installation method? And are you accessing the frigate UI through a reverse proxy or something similar? The camera onvif debug logs look fine, but the error before that it indicates there's websocket issue. The UI uses websockets to communicate with the backend for PTZ camera controls. |
Beta Was this translation helpful? Give feedback.
-
|
I have Frigate installed via docker compose and accessed through nginx reverse proxy. I think I also have the same issue as #8056 which might be a websocket issue with the proxy? Live view doesn't work but debug view does. I've just tried to set up webrtc live view and am hitting this error in the go2rtc logs: |
Beta Was this translation helpful? Give feedback.
0 replies
-
|
Yes it's definitely a proxy issue, accessing frigate directly and the PTZ controls work :) |
Beta Was this translation helpful? Give feedback.
1 reply
-
|
You'll want to follow the docs for a reverse proxy here: |
Beta Was this translation helpful? Give feedback.
-
|
Thanks, all I've added is: and that is working now. Thanks for the quick response! |
Beta Was this translation helpful? Give feedback.
0 replies
Answer selected by
NickM-27
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Thanks, all I've added is:
and that is working now. Thanks for the quick response!