Supported Devices

• This is a non-exhaustive list of devices this plugin does/doesn't yet/cannot support - the general rule is, if it works with the eWeLink app then it will work (or can be implemented) with this plugin
• If you have a device to add to this list then let me know - always appreciated
• This assumes the latest device firmware and latest plugin version installed
• Older model revisions may not (fully) support LAN mode - more info
• The plugin does not support devices in DIY mode

Supported Devices

Device	Cloud Support	Local Support	Notes
Switches
Sonoff BASIC/R2/R3	🟢	🟢	configure with singleDevices[] ➚
Sonoff POW/R2/R3/R316/R316D/R320D	🟢	🟢	configure with singleDevices[] ➚
Sonoff MINI/R2/R3	🟢	🟢	configure with singleDevices[] ➚
Sonoff RF/R2/R3	🟢	🟢	configure with singleDevices[] ➚
Sonoff SV	🟢	🟢	configure with singleDevices[] ➚
Sonoff RE5V1C	🟢	🟢	configure with singleDevices[] ➚
Sonoff DUAL/R2/R3/R3-Lite	🟢	🟢	configure with multiDevices[] ➚
Sonoff 4CH/PRO/R2/R3	🟢	🟢	configure with multiDevices[] ➚
Light Bulbs/Strips
Sonoff B1/R2	🟢	🔴	configure with lightDevices[] ➚
Sonoff L1/L2/Lite/L3	🟢	🔴	configure with lightDevices[] ➚
Sonoff B02-B-A60	🟢	🔴	configure with lightDevices[] ➚
Sonoff B02-F-A60	🟢	🔴	configure with lightDevices[] ➚
Sonoff B02-F-ST64	🟢	🔴	configure with lightDevices[] ➚
Sonoff B05-B-A60	🟢	🔴	configure with lightDevices[] ➚
Sonoff B05-BL-A19	🟢	🟢	configure with lightDevices[] ➚
Konesky Mosquito Killer	🟢	🔴	configure with lightDevices[] ➚
Light Switches
Sonoff T1/T2/T3/TX-1C	🟢	🟢	configure with singleDevices[] ➚
Sonoff T1/T2/T3/TX-2C/3C/4C	🟢	🟢	configure with multiDevices[] ➚
Sonoff SwitchMan M5 1-Gang	🟢	🟢	configure with singleDevices[] ➚
Sonoff SwitchMan M5 2/3-Gang	🟢	🟢	configure with multiDevices[] ➚
Sonoff IW101	🟢	🟢	configure with singleDevices[] ➚
Sonoff SLAMPHER/R2	🟢	🟢	configure with singleDevices[] ➚
Sonoff D1	🟢	🟢	configure with lightDevices[] ➚
KingArt KING-M4	🟢	🔴	configure with lightDevices[] ➚
Outlets
Sonoff S20	🟢	🟢	configure with singleDevices[] ➚
Sonoff S26/R2	🟢	🟢	configure with singleDevices[] ➚
Sonoff S31/Lite	🟢	🟢	configure with singleDevices[] ➚
Sonoff S55	🟢	🟢	configure with singleDevices[] ➚
Sonoff IW100	🟢	🟢	configure with singleDevices[] ➚
Sonoff Micro/CFH	🟢	🟢	configure with singleDevices[] ➚
Sensors
Sonoff RF Bridge	🟢	🟢	configure with rfDevices[] ➚
Sonoff DW1	🟢	🟢	configure with bridgeSensors[] ➚
Sonoff DW2-RF	🟢	🟢	configure with bridgeSensors[] ➚
Sonoff PIR3-RF	🟢	🟢	configure with bridgeSensors[] ➚
SA-026 Doorbell	🟢	🟢	configure with bridgeSensors[] ➚
Sonoff DW2-WiFi/L	🟢	🔴	configure with sensorDevices[] ➚
Sonoff TH10/TH16/R2	🟢	🟢	configure with thDevices[] ➚
Sonoff SC	🟢	🔴	configure with thDevices[] ➚
Sonoff S-Mate	🟢	🔴
Fans
Sonoff iFan/02/03/04	🟢	🟢	configure with fanDevices[] ➚
Thermostats
Sonoff NSPanel	🟢	🟢	configure with thDevices[] ➚
KKMOON HC-T010-EWF	🟢	🔴	configure with thDevices[] ➚
Blinds/Motors
Sonoff DUALR3/R3-Lite (Motor Mode)	🟢	🟢	configure with multiDevices[] ➚
KingArt KING-Q4	🟢	🔴	configure with singleDevices[] ➚
Garage Doors
Eachen GD-DC5	🟢	🟢	configure with singleDevices[] ➚
KingArt KING-Q1	🟢	🔴	configure with singleDevices[] ➚
Zigbee Bridge
Sonoff Zigbee Bridge/Pro	🟢	🔴
Any device that can be added to the Sonoff Zigbee Bridge via eWeLink should work with the plugin
Sonoff BASICZBR3	🟢	🔴	configure with singleDevices[] ➚
Sonoff ZBMINI	🟢	🔴	configure with singleDevices[] ➚
Sonoff S26R2ZB	⁉️	🔴
Sonoff S31ZB	🟢	🔴	configure with singleDevices[] ➚
Sonoff SNZB-01 Button	🟢	🔴	configure with sensorDevices[] ➚
Sonoff SNZB-02 Temp/Humidity Sensor	🟢	🔴	configure with sensorDevices[] ➚
Sonoff SNZB-03 Motion Sensor	🟢	🔴	configure with sensorDevices[] ➚
Sonoff SNZB-04 Door/Window Sensor	🟢	🔴	configure with sensorDevices[] ➚
Zigbee Single Channel	🟢	🔴	configure with singleDevices[] ➚
Zigbee Multi Channel	🟢	🔴	configure with multiDevices[] ➚
Zigbee Light (Dimmer)	🟢	🔴	configure with lightDevices[] ➚
Zigbee Light (Dimmer + CCT)	🟢	🔴	configure with lightDevices[] ➚
Zigbee Light (Dimmer + RGBW)	🟢	🔴	configure with lightDevices[] ➚
Zigbee Leak Sensor	🟢	🔴	configure with sensorDevices[] ➚
Zigbee Smoke Sensor	🟢	🔴	configure with sensorDevices[] ➚
Cameras
GK-200MP2-B	🔴	🟢	use homebridge-camera-ffmpeg ➚
eWeLink Camera App	🔴	🔴

Accessory Simulations

An accessory simulation can be used to create a custom accessory in Homebridge/HomeKit from a generic single/multi-channel device. See Accessory Simulations for information. The following accessories can be setup using Accessory Simulations:

• Garage Doors
• Blinds
• Windows
• Doors
• Locks
• Taps/Faucets
• Sprinkler Valves
• Heaters
• Coolers
• Humidifiers
• Dehumidifiers
• Leak Sensors