adding sources

README.md

@@ -0,0 +1,188 @@
+#README
+
+
+## LCD Screen Setup
+
+1.Expand the filesystem
+
+```
+sudo raspi-config
+```
+
+2.Change fb0 to fb1
+
+```
+sudo nano /usr/share/X11/xorg.conf.d/99-fbturbo.conf
+```
+
+3.Enable SPI if needed
+
+```
+# remove or comment out the spi blacklist line
+sudo nano /etc/modprobe.d/raspi-blacklist.conf
+```
+
+4.FBTFT drivers as loadable modules
+
+```
+sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update
+sudo reboot
+```
+
+5.Test (After second command, screen is not white anymore)
+
+```
+sudo modprobe flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
+
+sudo modprobe fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
+
+```
+
+6.Perminantly add Driver
+
+```
+#Add to file /etc/modules
+flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
+
+fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
+```
+7.Additional settings
+
+```
+#config.txt
+gpu_mem=128
+
+#cmdline.txt
+fbcon=map:1 fbcon=font:ProFont6x11
+
+```
+
+
+## LCD Touchscreen support
+
+1. Install libraries
+
+```
+sudo apt-get -y install xinput evtest libts-bin
+
+
+2. Add device to /etc/modules
+
+```
+
+## Enabling touchscreen
+
+ads7846_device model=7846 cs=1 gpio_pendown=17  keep_vref_on=1 swap_xy=0 pressure_max=255 x_plate_ohms=60 x_min=200  x_max=3900 y_min=200 y_max=3900
+
+```
+
+3. Get calibration parameters
+
+```
+wget http://adafruit-download.s3.amazonaws.com/xinput-calibrator_0.7.5-1_armhf.deb
+
+sudo dpkg -i -B xinput-calibrator_0.7.5-1_armhf.deb
+
+sudo rm /usr/share/X11/xorg.conf.d/99-calibration.conf
+
+sudo reboot
+
+```
+
+After reboot type `startx` and open `xterminal` then run the calibration tool
+
+```
+DISPLAY=:0.0 xinput_calibrator
+
+#edit 99-calibration using the new parameters, e.g.
+
+Section "InputClass"
+	Identifier "calibration"
+	MatchProduct "ADS7846 Touchscreen"
+	Option "Calibration" "3873 272 236 3868"
+	Option  "SwapAxes"      "1"
+EndSection
+
+```
+
+##Installing onscreen keyboard
+
+1. Download and install the debian package (do not get from repos)
+
+```
+wget http://ftp.us.debian.org/debian/pool/main/m/matchbox-keyboard/matchbox-
+keyboard_0.1+svn20080916-9+b1_armhf.deb
+
+
+```
+
+2. Create a toogle script to avoid multiple instances
+
+
+
+```
+$ sudo nano /usr/bin/toggle-matchbox-keyboard.sh
+```
+
+```
+
+#!/bin/bash
+
+PID=$(pidof matchbox-keyboard)
+if [ ! -e $PID ]; then
+        killall matchbox-keyboard
+else
+        matchbox-keyboard -s 80 extended&
+fi
+
+```
+
+```
+$ sudo chmod +x /usr/bin/toggle-matchbox-keyboard.sh
+```
+
+
+
+
+
+## Additional stuff
+
+1. Auto-login: comment out and add line
+
+
+```
+$ sudo nano /etc/inittab
+
+#1:2345:respawn:/sbin/getty --noclear 38400 tty1
+1:2345:respawn:/bin/login -f pi tty </dev/tty1 >/dev/tty1 2>&1
+
+
+``` 
+
+2. Startx by default
+
+``` 
+
+$ sudo nano /etc/rc.local 
+
+#add the following line before exit 0
+
+
+```
+echo -e '[NOTICE] Press any key NOW to cancel startx...'
+read -n 1 -t 3 ANY_KEY
+
+if [ "$ANY_KEY" == "" ]; then
+  su -l pi -c startx
+else
+  echo -e '[NOTICE] startx stopped'
+fi
+
+``` 
+
+
+### Sources :
+
+[1] https://github.com/notro/fbtft/issues/215
+[2] http://ozzmaker.com/2014/06/30/virtual-keyboard-for-the-raspberry-pi/
+[3] http://www.raspberrypi.org/forums/viewtopic.php?f=66&t=14719