-
-
Notifications
You must be signed in to change notification settings - Fork 17
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Starting.....please wait [BUG] #135
Comments
im pretty sure I know exactly what the cause of this issue is. I will post a new release soon. thanks for pointing this out |
Aquila_GD32_MM-ProUI-EX-MPC.zip I made a quick firmware file you can try flashing and see if that works |
That worked great thank you so much!!!! Can I ask what it was that was causing the issue? Thanks again for all that you do!!!
…________________________________
From: Andrew ***@***.***>
Sent: Thursday, May 16, 2024 7:33 AM
To: classicrocker883/MRiscoCProUI ***@***.***>
Cc: Oldskool81 ***@***.***>; Author ***@***.***>
Subject: Re: [classicrocker883/MRiscoCProUI] Starting.....please wait [BUG] (Issue #135)
Aquila_GD32_MM-ProUI-EX-MPC.zip<https://github.com/classicrocker883/MRiscoCProUI/files/15334424/Aquila_GD32_MM-ProUI-EX-MPC.zip>
I made a quick firmware file you can try flashing and see if that works
—
Reply to this email directly, view it on GitHub<#135 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/BBXH7ZNMVH5ZVEW22U4AQIDZCSKRZAVCNFSM6AAAAABHVDVO66VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDCMJUHE4DIMBQGM>.
You are receiving this because you authored the thread.Message ID: ***@***.***>
|
I had updated the settings.cpp file so that it saved memory so more features could be added to some versions. I tested the firmware using a probe so I figured it should be all good. some variables act as place holders in the EEPROM, I just reverted a couple changes I made. Marlin just updated with a few more file changes, like this ⚡️ Fix motion smoothness |
Did you test the latest release build?
Yes, and the problem still exists.
Bug Description
Installed latest firmware and Voxi red DWIN. Aquila_GD32_MM-ProUI-EX-MPC-05-13 screen is stuck on Starting......Please wait. will not boot.
Printer Model
Voxelab Aquila
Model Type
Aquila
Your Mainboard
Aquila GD32
Other Mainboard Type
No response
Add-ons that could be involved
No response
ProUI?
ProUI
Bed Leveling
MM - Manual Mesh Bed Leveling
Did you include your own configuration files?
Configuration.h
andConfiguration_adv.h
.Additional information & file uploads
No response
The text was updated successfully, but these errors were encountered: