Obversations & Questions - Spindle Control

[Jere51a]

Hope I'm not doing something wrong - I'm having a bunch of questions about Goko spindle control -

1. In the Command panel, the Spindle On / Off buttons appear to be greyed out no matter what.
2. In the DRO panel, I have Spindle, Spindle Speed, and Spindle Dir added to the panel. Great customization tools by the way... Anyway, Spindle indicates Off, no matter what. Spindle dir. indicates blank no matter what. However, spindle speed indicates the correct speed when Snnnn commands are encountered in gcode - either instream or via MDI.
3. In the Grbl Override panel the Toggle Spindle button is enabled, but it has no effect, either on the DRO Spindle indication, or on the Arduino hardware and machine. (Gerbl and the hardware are OK, since the spindle is controlled fine by other interfaces). It appears the Toggle Flood and Toggle Mist controls behave the same way.

Many thanks in advance for your advise about my spindle problems.

Kind Regards, Jere

[cncgoko]

@Jere51a Thanks for the report.
The 3 points are bugs and will be solved in next release.