TVOut PaddleWar game with added artwork
Demo/Game sketch for TinyRFModulator and DisplayFoundation library project.
This game was originally created by Maarten Janssen in 2015 and is converted to be able to use with TDisplayFoundation and TVOut. This is a demo project for TDisplayFoundation and TinyRFModulator.
Serveral things are changed:
- Reading controller values in percents
- Added defines and macros, makes it easier to convert the code
- Rebuild or remove graphics (monochrome)
- Created some Keen artwork (monochrome)
REQUIREMENTS
- MCU with 32Kb program space
- TVOut library
- TV with RF input and TinyRFModulator OR TV with composite input
- 10K Potentiometer as paddle input
HOW TO CONNECT
_____________
ARDUINO | PIEZO SPEAKER OR RCA CONNECTOR____
NANO/ GND o-------------------------------\ --------------------| |______
ATMEGA328 | _|_/| __/---|______)
D11 o ------- AUDIO OUT ------------[__ | --[_1K_RESISTOR_]--| ____|
| \|
| ____
D9 o ------- VIDEO SYNC ----|__1K RESITOR__]-------- | |______
| |----TV--------|______)
D7 o ------- VIDEO SIGNAL --|__470 OHM RESISTOR_]----| ___|
| | RCA CONNECTOR
GND o ---------------------------------------------------- TV-----/
| _|_ | _
___ 1uF |_______| |_____ PADDLE
| | + --| |_____| 10K POTENTIOMETER LINEAIR
AO o ------------------|---------------|_| (not a taper pot!)
|
______________|
TODO:
- Auto alignment to any screensize
HOW TO PLAY:
This demo lets you play the PaddleWar! game from the Commander Keen series.
- Connect a 10K potentiometer to A0, +5v and GND to control your paddle.
- Simple sounds are provided if you connect a small speaker between pin 11 and GND.
- The game will start automatically and end when either you or the MCU reach 21 points.
- The game restarts automatically.
SCREENSHOTS:
