Skip to content
forked from JJulio/b-robot

Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.

License

Notifications You must be signed in to change notification settings

codesigner/b-robot

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

B-Robot

Self Balancing arduino robot. Control via Smartphone. Fully 3D printed project.

Video: http://youtu.be/V-_uxpX9aFQ

Blog: http://cienciaycacharreo.blogspot.com.es/2013/10/b-robot-un-robot-equilibrista-impreso_28.html

Board: custom board (WITA): It´s an Arduino Leonardo + Wifi module (RN131)

Motors: NEMA17 Stepper Motors

Drivers: A4988 with 1/8 microstepping configuration

IMU: MPU6050 connected via I2C bus. We are using the DMP internal quaternion solution at 200Hz

Sonar sensor: LV-MaxSonar-EZ3.

Control algorithms: PI speed control driving a PD control for stability (control robot angle). The output of the stability control is a motor speed that is integrated (acceleration).

Wifi module : RN131 module in Soft AP mode, so you don´t need an existing Wifi network, the module generates it´s own network that you need to join with your smatphone

Communication protocol: OSC protocol (this is an open music protocol). It´s an UDP messages based protocol. You could find many applications that implement this protocol. I recommend TouchOSC because you could create your own interfaces.

Modes: Manual mode with external Wifi control via OSC protocol (Smartphone/Tablet...) Autonomous mode. It uses the sonar sensor for obstacle avoiding. When the robot detects an obstacle it starts turning until it finds an empty space and continue.

About

Self Balance arduino robot. Control via Smartphone. Fully 3D printed project.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published