This project is using Qwik with QwikCity. QwikCity is just a extra set of tools on top of Qwik to make it easier to build a full site, including directory-based routing, layouts, and more.
Inside your project, you'll see the following directory structure:
├── public/
│ └── ...
└── src/
├── components/
│ └── ...
└── routes/
└── ...
-
src/routes: Provides the directory based routing, which can include a hierarchy oflayout.tsxlayout files, and anindex.tsxfile as the page. Additionally,index.tsfiles are endpoints. Please see the routing docs for more info. -
src/components: Recommended directory for components. -
public: Any static assets, like images, can be placed in the public directory. Please see the Vite public directory for more info.
Use the pnpm qwik add command to add additional integrations. Some examples of integrations include: Cloudflare, Netlify or Express server, and the Static Site Generator (SSG).
pnpm qwik add # or `yarn qwik add`Development mode uses Vite's development server. During development, the dev command will server-side render (SSR) the output.
npm start # or `yarn start`Note: during dev mode, Vite may request a significant number of
.jsfiles. This does not represent a Qwik production build.
The preview command will create a production build of the client modules, a production build of src/entry.preview.tsx, and run a local server. The preview server is only for convenience to locally preview a production build, and it should not be used as a production server.
pnpm preview # or `yarn preview`The production build will generate client and server modules by running both client and server build commands. Additionally, the build command will use Typescript to run a type check on the source code.
pnpm build # or `yarn build`This app has a minimal Express server implementation. After running a full build, you can preview the build using the command:
pnpm serve
Then visit http://localhost:8080/
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
This app has a minimal Express server implementation. After running a full build, you can preview the build using the command:
pnpm serve
Then visit http://localhost:8080/
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
This app has a minimal Express server implementation. After running a full build, you can preview the build using the command:
pnpm serve
Then visit http://localhost:8080/
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
Cloudflare's wrangler CLI can be used to preview a production build locally. To start a local server, run:
pnpm serve
Then visit http://localhost:8787/
Cloudflare Pages are deployable through their Git provider integrations.
If you don't already have an account, then create a Cloudflare account here. Next go to your dashboard and follow the Cloudflare Pages deployment guide.
Within the projects "Settings" for "Build and deployments", the "Build command" should be pnpm build, and the "Build output directory" should be set to dist.
Cloudflare Page's function-invocation-routes config can be used to include, or exclude, certain paths to be used by the worker functions. Having a _routes.json file gives developers more granular control over when your Function is invoked.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or if the response should use a static-site generated (SSG) index.html file.
By default, the Cloudflare pages adaptor does not include a public/_routes.json config, but rather it is auto-generated from the build by the Cloudflare adaptor. An example of an auto-generate dist/_routes.json would be:
{
"include": [
"/*"
],
"exclude": [
"/_headers",
"/_redirects",
"/build/*",
"/favicon.ico",
"/manifest.json",
"/service-worker.js",
"/about"
],
"version": 1
}
In the above example, it's saying all pages should be SSR'd. However, the root static files such as /favicon.ico and any static assets in /build/* should be excluded from the Functions, and instead treated as a static file.
In most cases the generated dist/_routes.json file is ideal. However, if you need more granular control over each path, you can instead provide you're own public/_routes.json file. When the project provides its own public/_routes.json file, then the Cloudflare adaptor will not auto-generate the routes config and instead use the committed one within the public directory.
This starter site is configured to deploy to Netlify Edge Functions, which means it will be rendered at an edge location near to your users.
The Netlify CLI can be used to preview a production build locally. To do so: First build your site, then to start a local server, run:
- Install Netlify CLI globally
npm i -g netlify-cli. - Build your site with both ssr and static
pnpm build. - Start a local server with
pnpm serve. In this project,pnpm serveuses thenetlify devcommand to spin up a server that can handle Netlify's Edge Functions locally. - Visit http://localhost:8888/ to check out your site.
Netlify Edge Functions declarations can be configured to run on specific URL patterns. Each edge function declaration associates one site path pattern with one function to execute on requests that match the path. A single request can execute a chain of edge functions from a series of declarations. A single edge function can be associated with multiple paths across various declarations.
This is useful to determine if a page response should be Server-Side Rendered (SSR) or
if the response should use a static-site generated (SSG) index.html file instead.
By default, the Netlify Edge adaptor will generate a .netlify/edge-middleware/manifest.json file, which is used by the Netlify deployment to determine which paths should, and should not, use edge functions.
To override the generated manifest, you can add a declaration to the netlify.toml using the [[edge_functions]] config. For example:
[[edge_functions]]
path = "/admin"
function = "auth"You can deploy your site to Netlify either via a Git provider integration or through the Netlify CLI. This starter site includes a netlify.toml file to configure your build for deployment.
Once your site has been pushed to your Git provider, you can either link it in the Netlify UI or use the CLI. To link your site to a Git provider from the Netlify CLI, run the command:
netlify linkThis sets up continuous deployment for your site's repo. Whenever you push new commits to your repo, Netlify starts the build process..
If you wish to deploy from the CLI rather than using Git, you can use the command:
netlify deploy --buildYou must use the --build flag whenever you deploy. This ensures that the Edge Functions that this starter site relies on are generated and available when you deploy your site.
Add --prod flag to deploy to production.
This app has a minimal Express server implementation. After running a full build, you can preview the build using the command:
npm run serve
Then visit http://localhost:8080/