forked from icub-tech-iit/ipts
-
Notifications
You must be signed in to change notification settings - Fork 0
Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
adding CubeMX prj for mtb4 and strain2 rev.C
- Loading branch information
davidetome
committed
May 11, 2022
1 parent
b3c23a5
commit d235ce4
Showing
2 changed files
with
706 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Original file line number | Diff line number | Diff line change |
|---|---|---|
| @@ -0,0 +1,353 @@ | ||
| #MicroXplorer Configuration settings - do not modify | ||
| CAN1.ABOM=ENABLE | ||
| CAN1.AWUM=ENABLE | ||
| CAN1.BS1=CAN_BS1_2TQ | ||
| CAN1.BS2=CAN_BS2_5TQ | ||
| CAN1.CalculateBaudRate=2000000 | ||
| CAN1.CalculateTimeBit=500 | ||
| CAN1.CalculateTimeQuantum=62.5 | ||
| CAN1.IPParameters=CalculateTimeQuantum,CalculateTimeBit,CalculateBaudRate,BS1,BS2,Prescaler,ABOM,AWUM | ||
| CAN1.Prescaler=1 | ||
| Dma.I2C1_RX.5.Direction=DMA_PERIPH_TO_MEMORY | ||
| Dma.I2C1_RX.5.Instance=DMA2_Channel6 | ||
| Dma.I2C1_RX.5.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.I2C1_RX.5.MemInc=DMA_MINC_ENABLE | ||
| Dma.I2C1_RX.5.Mode=DMA_NORMAL | ||
| Dma.I2C1_RX.5.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.I2C1_RX.5.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.I2C1_RX.5.Priority=DMA_PRIORITY_LOW | ||
| Dma.I2C1_RX.5.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| Dma.I2C1_TX.4.Direction=DMA_MEMORY_TO_PERIPH | ||
| Dma.I2C1_TX.4.Instance=DMA2_Channel7 | ||
| Dma.I2C1_TX.4.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.I2C1_TX.4.MemInc=DMA_MINC_ENABLE | ||
| Dma.I2C1_TX.4.Mode=DMA_NORMAL | ||
| Dma.I2C1_TX.4.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.I2C1_TX.4.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.I2C1_TX.4.Priority=DMA_PRIORITY_LOW | ||
| Dma.I2C1_TX.4.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| Dma.I2C2_RX.3.Direction=DMA_PERIPH_TO_MEMORY | ||
| Dma.I2C2_RX.3.Instance=DMA1_Channel5 | ||
| Dma.I2C2_RX.3.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.I2C2_RX.3.MemInc=DMA_MINC_ENABLE | ||
| Dma.I2C2_RX.3.Mode=DMA_NORMAL | ||
| Dma.I2C2_RX.3.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.I2C2_RX.3.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.I2C2_RX.3.Priority=DMA_PRIORITY_LOW | ||
| Dma.I2C2_RX.3.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| Dma.I2C2_TX.2.Direction=DMA_MEMORY_TO_PERIPH | ||
| Dma.I2C2_TX.2.Instance=DMA1_Channel4 | ||
| Dma.I2C2_TX.2.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.I2C2_TX.2.MemInc=DMA_MINC_ENABLE | ||
| Dma.I2C2_TX.2.Mode=DMA_NORMAL | ||
| Dma.I2C2_TX.2.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.I2C2_TX.2.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.I2C2_TX.2.Priority=DMA_PRIORITY_LOW | ||
| Dma.I2C2_TX.2.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| Dma.Request0=USART2_RX | ||
| Dma.Request1=USART2_TX | ||
| Dma.Request2=I2C2_TX | ||
| Dma.Request3=I2C2_RX | ||
| Dma.Request4=I2C1_TX | ||
| Dma.Request5=I2C1_RX | ||
| Dma.RequestsNb=6 | ||
| Dma.USART2_RX.0.Direction=DMA_PERIPH_TO_MEMORY | ||
| Dma.USART2_RX.0.Instance=DMA1_Channel6 | ||
| Dma.USART2_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.USART2_RX.0.MemInc=DMA_MINC_ENABLE | ||
| Dma.USART2_RX.0.Mode=DMA_NORMAL | ||
| Dma.USART2_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.USART2_RX.0.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.USART2_RX.0.Priority=DMA_PRIORITY_LOW | ||
| Dma.USART2_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| Dma.USART2_TX.1.Direction=DMA_MEMORY_TO_PERIPH | ||
| Dma.USART2_TX.1.Instance=DMA1_Channel7 | ||
| Dma.USART2_TX.1.MemDataAlignment=DMA_MDATAALIGN_BYTE | ||
| Dma.USART2_TX.1.MemInc=DMA_MINC_ENABLE | ||
| Dma.USART2_TX.1.Mode=DMA_NORMAL | ||
| Dma.USART2_TX.1.PeriphDataAlignment=DMA_PDATAALIGN_BYTE | ||
| Dma.USART2_TX.1.PeriphInc=DMA_PINC_DISABLE | ||
| Dma.USART2_TX.1.Priority=DMA_PRIORITY_LOW | ||
| Dma.USART2_TX.1.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority | ||
| File.Version=6 | ||
| GPIO.groupedBy=Group By Peripherals | ||
| I2C1.I2C_Speed_Mode=I2C_Fast | ||
| I2C1.IPParameters=Timing,I2C_Speed_Mode,NoStretchMode | ||
| I2C1.NoStretchMode=I2C_NOSTRETCH_ENABLE | ||
| I2C1.Timing=0x0010061A | ||
| I2C2.I2C_Speed_Mode=I2C_Fast | ||
| I2C2.IPParameters=Timing,I2C_Speed_Mode,NoStretchMode | ||
| I2C2.NoStretchMode=I2C_NOSTRETCH_ENABLE | ||
| I2C2.Timing=0x0010061A | ||
| KeepUserPlacement=false | ||
| Mcu.CPN=STM32L452RCI6 | ||
| Mcu.Family=STM32L4 | ||
| Mcu.IP0=CAN1 | ||
| Mcu.IP1=DMA | ||
| Mcu.IP2=I2C1 | ||
| Mcu.IP3=I2C2 | ||
| Mcu.IP4=NVIC | ||
| Mcu.IP5=RCC | ||
| Mcu.IP6=SYS | ||
| Mcu.IP7=TIM6 | ||
| Mcu.IP8=USART1 | ||
| Mcu.IP9=USART2 | ||
| Mcu.IPNb=10 | ||
| Mcu.Name=STM32L452R(C-E)Ix | ||
| Mcu.Package=UFBGA64 | ||
| Mcu.Pin0=PC13 | ||
| Mcu.Pin1=PB9 | ||
| Mcu.Pin10=PA10 | ||
| Mcu.Pin11=PA9 | ||
| Mcu.Pin12=PA11 | ||
| Mcu.Pin13=PB6 | ||
| Mcu.Pin14=PA8 | ||
| Mcu.Pin15=PC9 | ||
| Mcu.Pin16=PC0 | ||
| Mcu.Pin17=PC8 | ||
| Mcu.Pin18=PA2 | ||
| Mcu.Pin19=PA5 | ||
| Mcu.Pin2=PA14 (JTCK/SWCLK) | ||
| Mcu.Pin20=PB0 | ||
| Mcu.Pin21=PB14 | ||
| Mcu.Pin22=PA3 | ||
| Mcu.Pin23=PA6 | ||
| Mcu.Pin24=PB1 | ||
| Mcu.Pin25=PB10 | ||
| Mcu.Pin26=PB13 | ||
| Mcu.Pin27=PA4 | ||
| Mcu.Pin28=PA7 | ||
| Mcu.Pin29=PB11 | ||
| Mcu.Pin3=PA13 (JTMS/SWDIO) | ||
| Mcu.Pin30=VP_SYS_VS_Systick | ||
| Mcu.Pin31=VP_TIM6_VS_ClockSourceINT | ||
| Mcu.Pin4=PB8 | ||
| Mcu.Pin5=PC11 | ||
| Mcu.Pin6=PC10 | ||
| Mcu.Pin7=PH0-OSC_IN (PH0) | ||
| Mcu.Pin8=PB7 | ||
| Mcu.Pin9=PC12 | ||
| Mcu.PinsNb=32 | ||
| Mcu.ThirdPartyNb=0 | ||
| Mcu.UserConstants= | ||
| Mcu.UserName=STM32L452RCIx | ||
| MxCube.Version=6.5.0 | ||
| MxDb.Version=DB.6.0.50 | ||
| NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.CAN1_RX0_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true | ||
| NVIC.CAN1_TX_IRQn=true\:0\:0\:false\:false\:true\:true\:true\:true | ||
| NVIC.DMA1_Channel4_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DMA1_Channel5_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DMA1_Channel6_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DMA1_Channel7_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DMA2_Channel6_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DMA2_Channel7_IRQn=true\:0\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.ForceEnableDMAVector=true | ||
| NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.PendSV_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4 | ||
| NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:true\:false\:true\:true | ||
| NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true | ||
| PA10.Locked=true | ||
| PA10.Mode=Asynchronous | ||
| PA10.Signal=USART1_RX | ||
| PA11.GPIOParameters=GPIO_Label | ||
| PA11.GPIO_Label=EN_OSC | ||
| PA11.Locked=true | ||
| PA11.Signal=GPIO_Output | ||
| PA13\ (JTMS/SWDIO).Locked=true | ||
| PA13\ (JTMS/SWDIO).Mode=Serial_Wire | ||
| PA13\ (JTMS/SWDIO).Signal=SYS_JTMS-SWDIO | ||
| PA14\ (JTCK/SWCLK).Locked=true | ||
| PA14\ (JTCK/SWCLK).Mode=Serial_Wire | ||
| PA14\ (JTCK/SWCLK).Signal=SYS_JTCK-SWCLK | ||
| PA2.Locked=true | ||
| PA2.Mode=Asynchronous | ||
| PA2.Signal=USART2_TX | ||
| PA3.Locked=true | ||
| PA3.Mode=Asynchronous | ||
| PA3.Signal=USART2_RX | ||
| PA4.GPIOParameters=GPIO_Label | ||
| PA4.GPIO_Label=SCK0 | ||
| PA4.Locked=true | ||
| PA4.Signal=GPIO_Output | ||
| PA5.GPIOParameters=GPIO_Label | ||
| PA5.GPIO_Label=SDA3 | ||
| PA5.Locked=true | ||
| PA5.Signal=GPIO_Output | ||
| PA6.GPIOParameters=GPIO_Label | ||
| PA6.GPIO_Label=SDA2 | ||
| PA6.Locked=true | ||
| PA6.Signal=GPIO_Output | ||
| PA7.GPIOParameters=GPIO_Label | ||
| PA7.GPIO_Label=SDA1 | ||
| PA7.Locked=true | ||
| PA7.Signal=GPIO_Output | ||
| PA8.GPIOParameters=GPIO_Label | ||
| PA8.GPIO_Label=SDA0 | ||
| PA8.Locked=true | ||
| PA8.Signal=GPIO_Output | ||
| PA9.Locked=true | ||
| PA9.Mode=Asynchronous | ||
| PA9.Signal=USART1_TX | ||
| PB0.GPIOParameters=GPIO_Label | ||
| PB0.GPIO_Label=CAN1_SHDN | ||
| PB0.Locked=true | ||
| PB0.Signal=GPIO_Output | ||
| PB1.GPIOParameters=GPIO_Label | ||
| PB1.GPIO_Label=CAN1_STB | ||
| PB1.Locked=true | ||
| PB1.Signal=GPIO_Output | ||
| PB10.Locked=true | ||
| PB10.Mode=I2C | ||
| PB10.Signal=I2C2_SCL | ||
| PB11.GPIOParameters=GPIO_Label | ||
| PB11.GPIO_Label=POWER_TSENSOR1 | ||
| PB11.Locked=true | ||
| PB11.Signal=GPIO_Output | ||
| PB13.GPIOParameters=GPIO_Label | ||
| PB13.GPIO_Label=PG_3V3 | ||
| PB13.Locked=true | ||
| PB13.Signal=GPIO_Input | ||
| PB14.Locked=true | ||
| PB14.Mode=I2C | ||
| PB14.Signal=I2C2_SDA | ||
| PB6.Locked=true | ||
| PB6.Mode=I2C | ||
| PB6.Signal=I2C1_SCL | ||
| PB7.Locked=true | ||
| PB7.Mode=I2C | ||
| PB7.Signal=I2C1_SDA | ||
| PB8.Mode=CAN_Activate | ||
| PB8.Signal=CAN1_RX | ||
| PB9.Locked=true | ||
| PB9.Mode=CAN_Activate | ||
| PB9.Signal=CAN1_TX | ||
| PC0.GPIOParameters=GPIO_Label | ||
| PC0.GPIO_Label=ANALOG_0 | ||
| PC0.Locked=true | ||
| PC0.Signal=GPIO_Output | ||
| PC10.GPIOParameters=GPIO_Label | ||
| PC10.GPIO_Label=BNO055_INT | ||
| PC10.Locked=true | ||
| PC10.Signal=GPXTI10 | ||
| PC11.GPIOParameters=GPIO_Label | ||
| PC11.GPIO_Label=BNO055_SELCOM | ||
| PC11.Locked=true | ||
| PC11.Signal=GPIO_Output | ||
| PC12.GPIOParameters=GPIO_Label | ||
| PC12.GPIO_Label=BNO055_RESET | ||
| PC12.Locked=true | ||
| PC12.Signal=GPIO_Output | ||
| PC13.GPIOParameters=GPIO_Label | ||
| PC13.GPIO_Label=BNO055_BOOT | ||
| PC13.Locked=true | ||
| PC13.Signal=GPIO_Output | ||
| PC8.GPIOParameters=GPIO_Label | ||
| PC8.GPIO_Label=LED_BLUE | ||
| PC8.Locked=true | ||
| PC8.Signal=GPIO_Output | ||
| PC9.GPIOParameters=GPIO_Label | ||
| PC9.GPIO_Label=LED_RED | ||
| PC9.Locked=true | ||
| PC9.Signal=GPIO_Output | ||
| PH0-OSC_IN\ (PH0).Locked=true | ||
| PH0-OSC_IN\ (PH0).Mode=HSE-External-Clock-Source | ||
| PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN | ||
| PinOutPanel.CurrentBGAView=Top | ||
| PinOutPanel.RotationAngle=0 | ||
| ProjectManager.AskForMigrate=true | ||
| ProjectManager.BackupPrevious=false | ||
| ProjectManager.CompilerOptimize=6 | ||
| ProjectManager.ComputerToolchain=false | ||
| ProjectManager.CoupleFile=true | ||
| ProjectManager.CustomerFirmwarePackage= | ||
| ProjectManager.DefaultFWLocation=true | ||
| ProjectManager.DeletePrevious=true | ||
| ProjectManager.DeviceId=STM32L452RCIx | ||
| ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.17.2 | ||
| ProjectManager.FreePins=true | ||
| ProjectManager.HalAssertFull=true | ||
| ProjectManager.HeapSize=0x200 | ||
| ProjectManager.KeepUserCode=true | ||
| ProjectManager.LastFirmware=true | ||
| ProjectManager.LibraryCopy=1 | ||
| ProjectManager.MainLocation=Core/Src | ||
| ProjectManager.NoMain=false | ||
| ProjectManager.PreviousToolchain= | ||
| ProjectManager.ProjectBuild=false | ||
| ProjectManager.ProjectFileName=MTB4_C.ioc | ||
| ProjectManager.ProjectName=MTB4_C | ||
| ProjectManager.RegisterCallBack= | ||
| ProjectManager.StackSize=0x400 | ||
| ProjectManager.TargetToolchain=STM32CubeIDE | ||
| ProjectManager.ToolChainLocation= | ||
| ProjectManager.UnderRoot=true | ||
| ProjectManager.functionlistsort=1-SystemClock_Config-RCC-false-HAL-false,2-MX_GPIO_Init-GPIO-false-HAL-true,3-MX_DMA_Init-DMA-false-HAL-true,4-MX_CAN1_Init-CAN1-false-HAL-true,5-MX_I2C1_Init-I2C1-false-HAL-true,6-MX_I2C2_Init-I2C2-false-HAL-true,7-MX_USART1_UART_Init-USART1-false-HAL-true,8-MX_USART2_UART_Init-USART2-false-HAL-true | ||
| RCC.ADCFreq_Value=64000000 | ||
| RCC.AHBFreq_Value=16000000 | ||
| RCC.APB1Freq_Value=16000000 | ||
| RCC.APB1TimFreq_Value=16000000 | ||
| RCC.APB2Freq_Value=16000000 | ||
| RCC.APB2TimFreq_Value=16000000 | ||
| RCC.CortexFreq_Value=16000000 | ||
| RCC.DFSDMFreq_Value=16000000 | ||
| RCC.FCLKCortexFreq_Value=16000000 | ||
| RCC.FamilyName=M | ||
| RCC.HCLKFreq_Value=16000000 | ||
| RCC.HSE_VALUE=10000000 | ||
| RCC.HSI48_VALUE=48000000 | ||
| RCC.HSI_VALUE=16000000 | ||
| RCC.I2C1Freq_Value=16000000 | ||
| RCC.I2C2Freq_Value=16000000 | ||
| RCC.I2C3Freq_Value=16000000 | ||
| RCC.I2C4Freq_Value=16000000 | ||
| RCC.IPParameters=ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI48_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSE_VALUE,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSourceVirtual,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SDMMCFreq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value | ||
| RCC.LPTIM1Freq_Value=16000000 | ||
| RCC.LPTIM2Freq_Value=16000000 | ||
| RCC.LPUART1Freq_Value=16000000 | ||
| RCC.LSCOPinFreq_Value=32000 | ||
| RCC.LSE_VALUE=32768 | ||
| RCC.LSI_VALUE=32000 | ||
| RCC.MCO1PinFreq_Value=16000000 | ||
| RCC.MSI_VALUE=4000000 | ||
| RCC.PLLN=16 | ||
| RCC.PLLPoutputFreq_Value=36571428.571428575 | ||
| RCC.PLLQoutputFreq_Value=128000000 | ||
| RCC.PLLRCLKFreq_Value=128000000 | ||
| RCC.PLLSAI1PoutputFreq_Value=18285714.285714287 | ||
| RCC.PLLSAI1QoutputFreq_Value=64000000 | ||
| RCC.PLLSAI1RoutputFreq_Value=64000000 | ||
| RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSI | ||
| RCC.PWRFreq_Value=16000000 | ||
| RCC.RNGFreq_Value=64000000 | ||
| RCC.SAI1Freq_Value=18285714.285714287 | ||
| RCC.SDMMCFreq_Value=64000000 | ||
| RCC.SYSCLKFreq_VALUE=16000000 | ||
| RCC.SYSCLKSource=RCC_SYSCLKSOURCE_HSI | ||
| RCC.UART4Freq_Value=16000000 | ||
| RCC.USART1Freq_Value=16000000 | ||
| RCC.USART2Freq_Value=16000000 | ||
| RCC.USART3Freq_Value=16000000 | ||
| RCC.USBFreq_Value=64000000 | ||
| RCC.VCOInputFreq_Value=16000000 | ||
| RCC.VCOOutputFreq_Value=256000000 | ||
| RCC.VCOSAI1OutputFreq_Value=128000000 | ||
| SH.GPXTI10.0=GPIO_EXTI10 | ||
| SH.GPXTI10.ConfNb=1 | ||
| TIM6.IPParameters=Prescaler,Period | ||
| TIM6.Period=1 | ||
| TIM6.Prescaler=1000 | ||
| USART1.IPParameters=VirtualMode-Asynchronous | ||
| USART1.VirtualMode-Asynchronous=VM_ASYNC | ||
| USART2.IPParameters=VirtualMode-Asynchronous | ||
| USART2.VirtualMode-Asynchronous=VM_ASYNC | ||
| VP_SYS_VS_Systick.Mode=SysTick | ||
| VP_SYS_VS_Systick.Signal=SYS_VS_Systick | ||
| VP_TIM6_VS_ClockSourceINT.Mode=Enable_Timer | ||
| VP_TIM6_VS_ClockSourceINT.Signal=TIM6_VS_ClockSourceINT | ||
| board=custom |
Oops, something went wrong.