mcHF V0.7

[Beechnut01]

Please fill out the appropriate values. Remove inapproriate/irrelevant values, but be prepare to provide more data. This template contains the most often asked questions.
We may adjust the template over time.

Please give as much information as necessary. At the same time, try to be concise. If you want to report something else than a defect, consider using a forum first. If you want report anything else but a defect remove the template if it does not make sense for your issue. Thank you!

Issue Data goes here (please remove text above):

Your firmware version:
Your bootloader version:
(Please note, we will generally not accept issue reports if your bootloader is not at least 5.0.1)

Hardware

• UI Board: mcHF 0.x / OVI40 1.x
• RF Board: mcHF 0.x / OVI40 1.x

Describe the issue:

Place tell us what does not work and how others can reproduce the issue (list related settings, steps to do, etc.):

Your relevant settings

Hint: most of the information can be seen on a screenshot of the main display.

If you have audio related problems:

• DEMODULATION MODE: LSB/...
• Filter: 2K7 LPF
• Noise blanker setting: 0
• Noise reduction: ON/OFF

If you have display (also fill if audio problem) related problems:

• Display resolution: 320x240 / 480x320
• Display connected via: Parallel / SPI
• Touchscreen: Yes/No
• Magnify: 1x / 32x
• Spectrum: Waterfall/Scope/Dual

Other settings you consider as relevant:

• ...

[df8oe]

CUS means "custom". If you choose a numer the values for ALC Release Time and ALC Input Gain are set automatically. If you choose CUS you can play around with both values by yourself.

[Beechnut01]

Thank you for this much appreciated 73 Peter M3OHN

…

________________________________ From: DF8OE <notifications@github.com> Sent: 28 January 2021 06:53 To: df8oe/UHSDR <UHSDR@noreply.github.com> Cc: Beechnut01 <m3ohn@hotmail.co.uk>; Author <author@noreply.github.com> Subject: Re: [df8oe/UHSDR] mcHF V0.7 (#1892) CUS means "custom". If you choose a numer the values for ALC Release Time and ALC Input Gain are set automatically. If you choose CUS you can play around with both values by yourself. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#1892 (comment)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AO2C27GQG7SEIV5O5XVGLATS4ECVZANCNFSM4WWOPFQQ>.