Skip to content

Latest commit

 

History

History
369 lines (290 loc) · 17.9 KB

workspaces.md

File metadata and controls

369 lines (290 loc) · 17.9 KB

Workspaces

Overview

Workspaces allow Tasks to declare parts of the filesystem that need to be provided at runtime by TaskRuns. A TaskRun can make these parts of the filesystem available in many ways: using a read-only ConfigMap or Secret, an existing PersistentVolumeClaim shared with other Tasks, create a PersistentVolumeClaim from a provided VolumeClaimTemplate, or simply an emptyDir that is discarded when the TaskRun completes.

Workspaces are similar to Volumes except that they allow a Task author to defer to users and their TaskRuns when deciding which class of storage to use.

Workspaces can serve the following purposes:

  • Storage of inputs and/or outputs
  • Sharing data among Tasks
  • A mount point for credentials held in Secrets
  • A mount point for configurations held in ConfigMaps
  • A mount point for common tools shared by an organization
  • A cache of build artifacts that speed up jobs

Workspaces in Tasks and TaskRuns

Tasks specify where a Workspace resides on disk for its Steps. At runtime, a TaskRun provides the specific details of the Volume that is mounted into that Workspace.

This separation of concerns allows for a lot of flexibility. For example, in isolation, a single TaskRun might simply provide an emptyDir volume that mounts quickly and disappears at the end of the run. In a more complex system, however, a TaskRun might use a PersistentVolumeClaim which is pre-populated with data for the Task to process. In both scenarios the Task's Workspace declaration remains the same and only the runtime information in the TaskRun changes.

Workspaces in Pipelines and PipelineRuns

A Pipeline can use Workspaces to show how storage will be shared through its Tasks. For example, Task A might clone a source repository onto a Workspace and Task B might compile the code that it finds in that Workspace. It's the Pipeline's job to ensure that the Workspace these two Tasks use is the same, and more importantly, that the order in which they access the Workspace is correct.

PipelineRuns perform mostly the same duties as TaskRuns - they provide the specific Volume information to use for the Workspaces used by each Pipeline. PipelineRuns have the added responsibility of ensuring that whatever Volume type they provide can be safely and correctly shared across multiple Tasks.

Configuring Workspaces

This section describes how to configure one or more Workspaces in a TaskRun.

Using Workspaces in Tasks

To configure one or more Workspaces in a Task, add a workspaces list with each entry using the following fields:

  • name - (required) A unique string identifier that can be used to refer to the workspace
  • description - An informative string describing the purpose of the Workspace
  • readOnly - A boolean declaring whether the Task will write to the Workspace.
  • mountPath - A path to a location on disk where the workspace will be available to Steps. Relative paths will be prepended with /workspace. If a mountPath is not provided the workspace will be placed by default at /workspace/<name> where <name> is the workspace's unique name.

Note the following:

  • A Task definition can include as many Workspaces as it needs.
  • A readOnly Workspace will have its volume mounted as read-only. Attempting to write to a readOnly Workspace will result in errors and failed TaskRuns.
  • mountPath can be either absolute or relative. Absolute paths start with / and relative paths start with the name of a directory. For example, a mountPath of "/foobar" is absolute and exposes the Workspace at /foobar inside the Task's Steps, but a mountPath of "foobar" is relative and exposes the Workspace at /workspace/foobar.

Below is an example Task definition that includes a Workspace called messages to which the Task writes a message:

spec:
  steps:
  - name: write-message
    image: ubuntu
    script: |
      #!/usr/bin/env bash
      set -xe
      echo hello! > $(workspaces.messages.path)/message
  workspaces:
  - name: messages
    description: The folder where we write the message to
    mountPath: /custom/path/relative/to/root

Using Workspace variables in Tasks

The following variables make information about Workspaces available to Tasks:

  • $(workspaces.<name>.path) - specifies the path to a Workspace where <name> is the name of the Workspace.
  • $(workspaces.<name>.claim) - specifies the name of the PersistentVolumeClaim used as a volume source for the Workspace where <name> is the name of the Workspace. If a volume source other than PersistentVolumeClaim is used, an empty string is returned.
  • $(workspaces.<name>.volume)- specifies the name of the Volume provided for a Workspace where <name> is the name of the Workspace.

Mapping Workspaces in Tasks to TaskRuns

A TaskRun that executes a Task containing a workspaces list must bind those workspaces to actual physical Volumes. To do so, the TaskRun includes its own workspaces list. Each entry in the list contains the following fields:

  • name - (required) The name of the Workspace within the Task for which the Volume is being provided
  • subPath - An optional subdirectory on the Volume to store data for that Workspace

The entry must also include one VolumeSource. See Using VolumeSources with Workspaces for more information.

Caution:

  • The subPath must exist on the Volume before the TaskRun executes or the execution will fail.
  • The Workspaces declared in a Task must be available when executing the associated TaskRun. Otherwise, the TaskRun will fail.

Examples of TaskRun definition using Workspaces

The following example illustrate how to specify Workspaces in your TaskRun definition, an emptyDir is provided for a Task's workspace called myworkspace:

apiVersion: tekton.dev/v1beta1
kind: TaskRun
metadata:
  generateName: example-taskrun-
spec:
  taskRef:
    name: example-task
  workspaces:
    - name: myworkspace # this workspace name must be declared in the Task
      emptyDir: {}      # emptyDir volumes can be used for TaskRuns, but consider using a PersistentVolumeClaim for PipelineRuns

For examples of using other types of volume sources, see Specifying VolumeSources in Workspaces. For a more in-depth example, see Workspaces in a TaskRun.

Using Workspaces in Pipelines

While individual Tasks declare the Workspaces they need to run, the Pipeline decides which Workspaces are shared among its Tasks. To declare shared Workspaces in a Pipeline, you must add the following information to your Pipeline definition:

  • A list of Workspaces that your PipelineRuns will be providing. Use the workspaces field to specify the target Workspaces in your Pipeline definition as shown below. Each entry in the list must have a unique name.
  • A mapping of Workspace names between the Pipeline and the Task definitions.

The example below defines a Pipeline with a single Workspace named pipeline-ws1. This Workspace is bound in two Tasks - first as the output workspace declared by the gen-code Task, then as the src workspace declared by the commit Task. If the Workspace provided by the PipelineRun is a PersistentVolumeClaim then these two Tasks can share data within that Workspace.

spec:
  workspaces:
    - name: pipeline-ws1 # Name of the workspace in the Pipeline
  tasks:
    - name: use-ws-from-pipeline
      taskRef:
        name: gen-code # gen-code expects a workspace named "output"
      workspaces:
        - name: output
          workspace: pipeline-ws1
    - name: use-ws-again
      taskRef:
        name: commit # commit expects a workspace named "src"
      workspaces:
        - name: src
          workspace: pipeline-ws1
      runAfter:
        - use-ws-from-pipeline # important: use-ws-from-pipeline writes to the workspace first

Include a subPath in the workspace binding to mount different parts of the same volume for different Tasks. See a full example of this kind of Pipeline which writes data to two adjacent directories on the same Volume.

The subPath specified in a Pipeline will be appended to any subPath specified as part of the PipelineRun workspace declaration. So a PipelineRun declaring a Workspace with subPath of /foo for a Pipeline who binds it to a Task with subPath of /bar will end up mounting the Volume's /foo/bar directory.

Specifying Workspace order in a Pipeline

Sharing a Workspace between Tasks requires you to define the order in which those Tasks will be accessing that Workspace since different classes of storage have different limits for concurrent reads and writes. For example, a PersistentVolumeClaim with access mode ReadWriteOnce only allow Tasks on the same node writing to it at once.

Using parallel Tasks in a Pipeline will work with PersistentVolumeClaims configured with access mode ReadWriteMany or ReadOnlyMany but you must ensure that those are available for your storage class. When using PersistentVolumeClaims with access mode ReadWriteOnce for parallel Tasks, you can configure a workspace with it's own PersistentVolumeClaim for each parallel Task.

Use the runAfter field in your Pipeline definition to define when a Task should be executed. For more information, see the runAfter documentation.

Warning: You must ensure that this order is compatible with the configured access modes for your PersistentVolumeClaim. Parallel Tasks using the same PersistentVolumeClaim with access mode ReadWriteOnce, may execute on different nodes and be forced to execute sequentially which may cause Tasks to time out.

Specifying Workspaces in PipelineRuns

For a PipelineRun to execute a Pipeline that includes one or more Workspaces, it needs to bind the Workspace names to volumes using its own workspaces field. Each entry in this list must correspond to a Workspace declaration in the Pipeline. Each entry in the workspaces list must specify the following:

  • name - (required) the name of the Workspace specified in the Pipeline definition for which a volume is being provided.
  • subPath - (optional) a directory on the volume that will store that Workspace's data. This directory must exist at the time the TaskRun executes, otherwise the execution will fail.

The entry must also include one VolumeSource. See Using VolumeSources with Workspaces for more information.

Note: If the Workspaces specified by a Pipeline are not provided at runtime by a PipelineRun, that PipelineRun will fail.

Example PipelineRun definition using Workspaces

In the example below, a volumeClaimTemplate is provided for how a PersistentVolumeClaim should be created for a workspace named myworkspace declared in a Pipeline. When using volumeClaimTemplate a new PersistentVolumeClaim is created for each PipelineRun and it allows the user to specify e.g. size and StorageClass for the volume.

apiVersion: tekton.dev/v1beta1
kind: PipelineRun
metadata:
  generateName: example-pipelinerun-
spec:
  pipelineRef:
    name: example-pipeline
  workspaces:
    - name: myworkspace # this workspace name must be declared in the Pipeline
      volumeClaimTemplate:
        spec:
          accessModes:
            - ReadWriteOnce # access mode may affect how you can use this volume in parallel tasks
          resources:
            requests:
              storage: 1Gi

For examples of using other types of volume sources, see Specifying VolumeSources in Workspaces. For a more in-depth example, see the Workspaces in PipelineRun YAML sample.

Specifying VolumeSources in Workspaces

You can only use a single type of VolumeSource per Workspace entry. The configuration options differ for each type. Workspaces support the following fields:

Using PersistentVolumeClaims as VolumeSource

PersistentVolumeClaim volumes are a good choice for sharing data among Tasks within a Pipeline. Beware that the access mode configured for the PersinstentVolumeClaim effects how you can use the volume for parallel Tasks in a Pipeline. See Specifying workspace order in a Pipeline for more information about this. There are two ways of using PersistentVolumeClaims as a VolumeSource.

volumeClaimTemplate

The volumeClaimTemplate is a template of a PersistentVolumeClaim volume, created for each PipelineRun or TaskRun. When the volume is created from a template in a PipelineRun or TaskRun it will be deleted when the PipelineRun or TaskRun is deleted.

workspaces:
- name: myworkspace
  volumeClaimTemplate:
    spec:
      accessModes: 
      - ReadWriteOnce
      resources:
        requests:
          storage: 1Gi
persistentVolumeClaim

The persistentVolumeClaim field references an existing persistentVolumeClaim volume. The example exposes only the subdirectory my-subdir from that PersistentVolumeClaim

workspaces:
- name: myworkspace
  persistentVolumeClaim:
    claimName: mypvc
  subPath: my-subdir

Using other types of VolumeSources

emptyDir

The emptyDir field references an emptyDir volume which holds a temporary directory that only lives as long as the TaskRun that invokes it. emptyDir volumes are not suitable for sharing data among Tasks within a Pipeline. However, they work well for single TaskRuns where the data stored in the emptyDir needs to be shared among the Steps of the Task and discarded after execution.

workspaces:
- name: myworkspace
  emptyDir: {}
configMap

The configMap field references a configMap volume. Using a configMap as a Workspace has the following limitations:

  • configMap volume sources are always mounted as read-only. Steps cannot write to them and will error out if they try.
  • The configMap you want to use as a Workspace must exist prior to submitting the TaskRun.
  • configMaps are size-limited to 1MB.
workspaces:
- name: myworkspace
  configmap:
    name: my-configmap
secret

The secret field references a secret volume. Using a secret volume has the following limitations:

  • secret volume sources are always mounted as read-only. Steps cannot write to them and will error out if they try.
  • The secret you want to use as a Workspace must exist prior to submitting the TaskRun.
  • secret are size-limited to 1MB.
workspaces:
- name: myworkspace
  secret:
    secretName: my-secret

If you need support for a VolumeSource type not listed above, open an issue or a pull request.

More examples

See the following in-depth examples of configuring Workspaces: