The call to Dns.GetHostEntry() may fail on MacOS

src/devices/Arduino/Arduino.sln

@@ -7,7 +7,7 @@ Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Arduino", "Arduino.csproj",
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "System.Device.Gpio", "..\..\System.Device.Gpio\System.Device.Gpio.csproj", "{0B90F9D4-7353-4172-A317-714471A06781}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Arduino.sample", "samples\Arduino.sample.csproj", "{2670F7BF-A7C8-49EB-9A99-1719A90D0C67}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Arduino.sample", "samples\ApiChecker\Arduino.sample.csproj", "{2670F7BF-A7C8-49EB-9A99-1719A90D0C67}"
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bmxx80", "..\Bmxx80\Bmxx80.csproj", "{EEEB0FB8-E1ED-4970-BDF6-DA3D5E2ED074}"
 EndProject
@@ -21,7 +21,7 @@ Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "CpuTemperature", "..\CpuTem
 EndProject
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "samples", "samples", "{9E5A25ED-9839-4C1A-9B27-993437D1CB31}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Arduino.Monitor", "samples\Arduino.Monitor.csproj", "{23B4B60C-9594-42BB-9D25-C54983B0F809}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Arduino.Monitor", "samples\Monitor\Arduino.Monitor.csproj", "{23B4B60C-9594-42BB-9D25-C54983B0F809}"
 EndProject
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "tests", "tests", "{CA26B999-4C0E-4E82-A46E-A68AC1B85C10}"
 EndProject

src/devices/Arduino/samples/Arduino.sample.csproj → src/devices/Arduino/samples/ApiChecker/Arduino.sample.csproj

@@ -16,10 +16,9 @@
     <Compile Include="TestCases.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="..\..\Bmxx80\Bmxx80.csproj" />
-    <ProjectReference Include="..\..\Board\Board.csproj" />
-    <ProjectReference Include="..\..\Common\Common.csproj" />
-    <ProjectReference Include="..\..\Mcp3xxx\Mcp3xxx.csproj" />
-    <ProjectReference Include="..\Arduino.csproj" />
+    <ProjectReference Include="..\..\..\Bmxx80\Bmxx80.csproj" />
+    <ProjectReference Include="..\..\..\Board\Board.csproj" />
+    <ProjectReference Include="..\..\..\Mcp3xxx\Mcp3xxx.csproj" />
+    <ProjectReference Include="..\..\Arduino.csproj" />
   </ItemGroup>
 </Project>

src/devices/Arduino/samples/Arduino.Monitor.csproj → src/devices/Arduino/samples/Monitor/Arduino.Monitor.csproj

@@ -14,13 +14,12 @@
     <Compile Include="Arduino.Monitor.cs" />
   </ItemGroup>
   <ItemGroup>
-    <!--Cases used when running in VS, with the solution config either Windows-Debug or Linux-Debug (or -Release) -->
-    <ProjectReference Include="..\..\Bmxx80\Bmxx80.csproj" />
-    <ProjectReference Include="..\..\Button\Button.csproj" />
-    <ProjectReference Include="..\..\Board\Board.csproj" />
-    <ProjectReference Include="..\..\CharacterLcd\CharacterLcd.csproj" />
-    <ProjectReference Include="..\..\HardwareMonitor\HardwareMonitor.csproj" />
-    <ProjectReference Include="..\..\Mcp3xxx\Mcp3xxx.csproj" />
-    <ProjectReference Include="..\Arduino.csproj" />
+    <ProjectReference Include="..\..\..\Bmxx80\Bmxx80.csproj" />
+    <ProjectReference Include="..\..\..\Button\Button.csproj" />
+    <ProjectReference Include="..\..\..\Board\Board.csproj" />
+    <ProjectReference Include="..\..\..\CharacterLcd\CharacterLcd.csproj" />
+    <ProjectReference Include="..\..\..\HardwareMonitor\HardwareMonitor.csproj" />
+    <ProjectReference Include="..\..\..\Mcp3xxx\Mcp3xxx.csproj" />
+    <ProjectReference Include="..\..\Arduino.csproj" />
   </ItemGroup>
 </Project>

src/devices/Arduino/tests/Arduino.Tests.csproj

@@ -10,7 +10,7 @@
     <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
   </PropertyGroup>
   <ItemGroup>
-    <ProjectReference Include="../Arduino.csproj" />
+    <ProjectReference Include="..\Arduino.csproj" />
     <ProjectReference Include="..\..\..\..\tools\ArduinoCsCompiler\Frontend\Frontend.csproj" />
     <PackageReference Include="Microsoft.Extensions.Logging" Version="5.0.0" />
     <PackageReference Include="Microsoft.Extensions.Logging.Console" Version="5.0.0" />

src/devices/Bh1745/Bh1745.sln

@@ -5,9 +5,9 @@ VisualStudioVersion = 16.0.31205.134
 MinimumVisualStudioVersion = 15.0.26124.0
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "samples", "samples", "{EA121A48-7916-4D9D-94C8-8E59BCDE3A96}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bh1745.Sample", "samples\Bh1745.Sample.csproj", "{24A728CA-F4EF-4DB0-B13F-65FFD772352B}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bh1745.Sample", "samples\BH1745\Bh1745.Sample.csproj", "{24A728CA-F4EF-4DB0-B13F-65FFD772352B}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bh1745CustomConfiguration.Sample", "samples\Bh1745CustomConfiguration.Sample.csproj", "{F6ED35EA-2FDE-4056-8165-0FAB6CE5DD5E}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bh1745CustomConfiguration.Sample", "samples\CustomConfiguration\Bh1745CustomConfiguration.Sample.csproj", "{F6ED35EA-2FDE-4056-8165-0FAB6CE5DD5E}"
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bh1745", "Bh1745.csproj", "{C572C86D-5BB2-4610-84EA-768257758933}"
 EndProject

src/devices/Bh1745/samples/Bh1745.Sample.csproj → src/devices/Bh1745/samples/BH1745/Bh1745.Sample.csproj

@@ -5,9 +5,9 @@
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
   <ItemGroup>
-    <Compile Include="Program.cs" />
+    <Compile Include="Bh1745.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="../Bh1745.csproj" />
+    <ProjectReference Include="../../Bh1745.csproj" />
   </ItemGroup>
 </Project>

src/devices/Bmxx80/samples/Bme280.sample.csproj → src/devices/Bh1745/samples/CustomConfiguration/Bh1745CustomConfiguration.Sample.csproj

@@ -5,13 +5,9 @@
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
   <ItemGroup>
-    <None Remove="rpi-bmp280_i2c.fzz" />
-    <None Remove="rpi-bmp280_i2c.png" />
+    <Compile Include="Bh1745.CustomConfiguration.cs" />
   </ItemGroup>
   <ItemGroup>
-    <Compile Include="Bme280.sample.cs" />
-  </ItemGroup>
-  <ItemGroup>
-    <ProjectReference Include="..\Bmxx80.csproj" />
+    <ProjectReference Include="../../Bh1745.csproj" />
   </ItemGroup>
 </Project>

src/devices/Bmxx80/Bmxx80.sln

@@ -5,11 +5,11 @@ VisualStudioVersion = 16.0.30011.22
 MinimumVisualStudioVersion = 15.0.26124.0
 Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "samples", "samples", "{3810A23A-DF9E-4956-961F-10272B731209}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bme280.sample", "samples\Bme280.sample.csproj", "{5F20AA65-F5E2-4CD9-8847-1508DA362092}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bme280.sample", "samples\Bme280\Bme280.sample.csproj", "{5F20AA65-F5E2-4CD9-8847-1508DA362092}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bme680.sample", "samples\Bme680.sample.csproj", "{0583C743-4EE5-4150-8886-AABC1EB6A339}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bme680.sample", "samples\Bme680\Bme680.sample.csproj", "{0583C743-4EE5-4150-8886-AABC1EB6A339}"
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bmp280.sample", "samples\Bmp280.sample.csproj", "{99456915-2483-4C22-8F63-8817A097F2E2}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bmp280.sample", "samples\Bmp280\Bmp280.sample.csproj", "{99456915-2483-4C22-8F63-8817A097F2E2}"
 EndProject
 Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Bmxx80", "Bmxx80.csproj", "{D0AA8380-159F-445B-A081-D750B9062ADA}"
 EndProject

src/devices/Bh1745/samples/Bh1745CustomConfiguration.Sample.csproj → src/devices/Bmxx80/samples/Bme280/Bme280.sample.csproj

@@ -5,9 +5,9 @@
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
   <ItemGroup>
-    <Compile Include="Program.CustomConfiguration.cs" />
+    <Compile Include="Bme280.sample.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="../Bh1745.csproj" />
+    <ProjectReference Include="../../Bmxx80.csproj" />
   </ItemGroup>
 </Project>

src/devices/Bmxx80/samples/Bme680.sample.cs → src/devices/Bmxx80/samples/Bme680/Bme680.sample.cs

@@ -1,94 +1,94 @@
-// Licensed to the .NET Foundation under one or more agreements.
-// The .NET Foundation licenses this file to you under the MIT license.
-
-using System;
-using System.Device.I2c;
-using System.Threading;
-using Iot.Device.Bmxx80;
-using Iot.Device.Common;
-using UnitsNet;
-
-Console.WriteLine("Hello BME680!");
-
-// The I2C bus ID on the Raspberry Pi 3.
-const int busId = 1;
-// set this to the current sea level pressure in the area for correct altitude readings
-Pressure defaultSeaLevelPressure = WeatherHelper.MeanSeaLevel;
-
-I2cConnectionSettings i2cSettings = new(busId, Bme680.DefaultI2cAddress);
-I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
-
-using Bme680 bme680 = new Bme680(i2cDevice, Temperature.FromDegreesCelsius(20.0));
-
-while (true)
-{
-    // reset will change settings back to default
-    bme680.Reset();
-
-    // 10 consecutive measurement with default settings
-    for (var i = 0; i < 10; i++)
-    {
-        // Perform a synchronous measurement
-        var readResult = bme680.Read();
-
-        // Print out the measured data
-        Console.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
-        Console.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
-        Console.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
-        Console.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");
-
-        if (readResult.Temperature.HasValue && readResult.Pressure.HasValue)
-        {
-            var altValue = WeatherHelper.CalculateAltitude(readResult.Pressure.Value, defaultSeaLevelPressure, readResult.Temperature.Value);
-            Console.WriteLine($"Altitude: {altValue.Meters:0.##}m");
-        }
-
-        if (readResult.Temperature.HasValue && readResult.Humidity.HasValue)
-        {
-            // WeatherHelper supports more calculations, such as saturated vapor pressure, actual vapor pressure and absolute humidity.
-            Console.WriteLine($"Heat index: {WeatherHelper.CalculateHeatIndex(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
-            Console.WriteLine($"Dew point: {WeatherHelper.CalculateDewPoint(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
-        }
-
-        // when measuring the gas resistance on each cycle it is important to wait a certain interval
-        // because a heating plate is activated which will heat up the sensor without sleep, this can
-        // falsify all readings coming from the sensor
-        Thread.Sleep(1000);
-    }
-
-    // change the settings
-    bme680.TemperatureSampling = Sampling.HighResolution;
-    bme680.HumiditySampling = Sampling.UltraHighResolution;
-    bme680.PressureSampling = Sampling.Skipped;
-
-    bme680.ConfigureHeatingProfile(Bme680HeaterProfile.Profile2, Temperature.FromDegreesCelsius(280), Duration.FromMilliseconds(80), Temperature.FromDegreesCelsius(24));
-    bme680.HeaterProfile = Bme680HeaterProfile.Profile2;
-
-    // 10 consecutive measurements with custom settings
-    for (int i = 0; i < 10; i++)
-    {
-        // Perform an asynchronous measurement
-        var readResult = await bme680.ReadAsync();
-
-        // Print out the measured data
-        Console.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
-        Console.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
-        Console.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
-        Console.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");
-
-        if (readResult.Temperature.HasValue && readResult.Pressure.HasValue)
-        {
-            var altValue = WeatherHelper.CalculateAltitude(readResult.Pressure.Value, defaultSeaLevelPressure, readResult.Temperature.Value);
-            Console.WriteLine($"Altitude: {altValue.Meters:0.##}m");
-        }
-
-        if (readResult.Temperature.HasValue && readResult.Humidity.HasValue)
-        {
-            // WeatherHelper supports more calculations, such as saturated vapor pressure, actual vapor pressure and absolute humidity.
-            Console.WriteLine($"Heat index: {WeatherHelper.CalculateHeatIndex(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
-            Console.WriteLine($"Dew point: {WeatherHelper.CalculateDewPoint(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
-        }
-
-        Thread.Sleep(1000);
-    }
-}
+// Licensed to the .NET Foundation under one or more agreements.
+// The .NET Foundation licenses this file to you under the MIT license.
+
+using System;
+using System.Device.I2c;
+using System.Threading;
+using Iot.Device.Bmxx80;
+using Iot.Device.Common;
+using UnitsNet;
+
+Console.WriteLine("Hello BME680!");
+
+// The I2C bus ID on the Raspberry Pi 3.
+const int busId = 1;
+// set this to the current sea level pressure in the area for correct altitude readings
+Pressure defaultSeaLevelPressure = WeatherHelper.MeanSeaLevel;
+
+I2cConnectionSettings i2cSettings = new(busId, Bme680.DefaultI2cAddress);
+I2cDevice i2cDevice = I2cDevice.Create(i2cSettings);
+
+using Bme680 bme680 = new Bme680(i2cDevice, Temperature.FromDegreesCelsius(20.0));
+
+while (true)
+{
+    // reset will change settings back to default
+    bme680.Reset();
+
+    // 10 consecutive measurement with default settings
+    for (var i = 0; i < 10; i++)
+    {
+        // Perform a synchronous measurement
+        var readResult = bme680.Read();
+
+        // Print out the measured data
+        Console.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
+        Console.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
+        Console.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
+        Console.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");
+
+        if (readResult.Temperature.HasValue && readResult.Pressure.HasValue)
+        {
+            var altValue = WeatherHelper.CalculateAltitude(readResult.Pressure.Value, defaultSeaLevelPressure, readResult.Temperature.Value);
+            Console.WriteLine($"Altitude: {altValue.Meters:0.##}m");
+        }
+
+        if (readResult.Temperature.HasValue && readResult.Humidity.HasValue)
+        {
+            // WeatherHelper supports more calculations, such as saturated vapor pressure, actual vapor pressure and absolute humidity.
+            Console.WriteLine($"Heat index: {WeatherHelper.CalculateHeatIndex(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
+            Console.WriteLine($"Dew point: {WeatherHelper.CalculateDewPoint(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
+        }
+
+        // when measuring the gas resistance on each cycle it is important to wait a certain interval
+        // because a heating plate is activated which will heat up the sensor without sleep, this can
+        // falsify all readings coming from the sensor
+        Thread.Sleep(1000);
+    }
+
+    // change the settings
+    bme680.TemperatureSampling = Sampling.HighResolution;
+    bme680.HumiditySampling = Sampling.UltraHighResolution;
+    bme680.PressureSampling = Sampling.Skipped;
+
+    bme680.ConfigureHeatingProfile(Bme680HeaterProfile.Profile2, Temperature.FromDegreesCelsius(280), Duration.FromMilliseconds(80), Temperature.FromDegreesCelsius(24));
+    bme680.HeaterProfile = Bme680HeaterProfile.Profile2;
+
+    // 10 consecutive measurements with custom settings
+    for (int i = 0; i < 10; i++)
+    {
+        // Perform an asynchronous measurement
+        var readResult = await bme680.ReadAsync();
+
+        // Print out the measured data
+        Console.WriteLine($"Gas resistance: {readResult.GasResistance?.Ohms:0.##}Ohm");
+        Console.WriteLine($"Temperature: {readResult.Temperature?.DegreesCelsius:0.#}\u00B0C");
+        Console.WriteLine($"Pressure: {readResult.Pressure?.Hectopascals:0.##}hPa");
+        Console.WriteLine($"Relative humidity: {readResult.Humidity?.Percent:0.#}%");
+
+        if (readResult.Temperature.HasValue && readResult.Pressure.HasValue)
+        {
+            var altValue = WeatherHelper.CalculateAltitude(readResult.Pressure.Value, defaultSeaLevelPressure, readResult.Temperature.Value);
+            Console.WriteLine($"Altitude: {altValue.Meters:0.##}m");
+        }
+
+        if (readResult.Temperature.HasValue && readResult.Humidity.HasValue)
+        {
+            // WeatherHelper supports more calculations, such as saturated vapor pressure, actual vapor pressure and absolute humidity.
+            Console.WriteLine($"Heat index: {WeatherHelper.CalculateHeatIndex(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
+            Console.WriteLine($"Dew point: {WeatherHelper.CalculateDewPoint(readResult.Temperature.Value, readResult.Humidity.Value).DegreesCelsius:0.#}\u00B0C");
+        }
+
+        Thread.Sleep(1000);
+    }
+}

src/devices/Bmxx80/samples/Bme680.sample.csproj → src/devices/Bmxx80/samples/Bme680/Bme680.sample.csproj

@@ -4,14 +4,10 @@
     <TargetFramework>$(DefaultSampleTfms)</TargetFramework>
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
-  <ItemGroup>
-    <None Remove="rpi-bmp280_i2c.fzz" />
-    <None Remove="rpi-bmp280_i2c.png" />
-  </ItemGroup>
   <ItemGroup>
     <Compile Include="Bme680.sample.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="..\Bmxx80.csproj" />
+    <ProjectReference Include="../../Bmxx80.csproj" />
   </ItemGroup>
 </Project>

src/devices/Bmxx80/samples/Bmp280.sample.csproj → src/devices/Bmxx80/samples/Bmp280/Bmp280.sample.csproj

@@ -4,14 +4,10 @@
     <TargetFramework>$(DefaultSampleTfms)</TargetFramework>
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
-  <ItemGroup>
-    <None Remove="rpi-bmp280_i2c.fzz" />
-    <None Remove="rpi-bmp280_i2c.png" />
-  </ItemGroup>
   <ItemGroup>
     <Compile Include="Bmp280.sample.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="..\Bmxx80.csproj" />
+    <ProjectReference Include="../../Bmxx80.csproj" />
   </ItemGroup>
 </Project>

src/devices/LiquidLevel/LiquidLevel.sln

@@ -10,9 +10,9 @@ Project("{2150E333-8FDC-42A3-9474-1A3956D46DE8}") = "samples", "samples", "{499A
 		samples\README.md = samples\README.md
 	EndProjectSection
 EndProject
-Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Llc200d3sh.Sample", "samples\Llc200d3sh.Sample.csproj", "{6A38157B-7F9E-4003-A346-D898C86AE8FA}"
+Project("{9A19103F-16F7-4668-BE54-9A1E7A4F7556}") = "Llc200d3sh.Sample", "samples\Llc200d3sh\Llc200d3sh.Sample.csproj", "{6A38157B-7F9E-4003-A346-D898C86AE8FA}"
 EndProject
-Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "LiquidLevelSwitch.Sample", "samples\LiquidLevelSwitch.Sample.csproj", "{2675D556-74B1-40DA-B1F8-4CE2733463CF}"
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "LiquidLevelSwitch.Sample", "samples\LiquidLevelSwitch\LiquidLevelSwitch.Sample.csproj", "{2675D556-74B1-40DA-B1F8-4CE2733463CF}"
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution

src/devices/LiquidLevel/samples/LiquidLevelSwitch.Sample.csproj → src/devices/LiquidLevel/samples/LiquidLevelSwitch/LiquidLevelSwitch.Sample.csproj

@@ -4,14 +4,10 @@
     <TargetFramework>$(DefaultSampleTfms)</TargetFramework>
     <EnableDefaultItems>false</EnableDefaultItems>
   </PropertyGroup>
-  <ItemGroup>
-    <None Remove="rpi-llc200d3sh.fzz" />
-    <None Remove="rpi-llc200d3sh_bb.png" />
-  </ItemGroup>
   <ItemGroup>
     <Compile Include="LiquidLevelSwitch.sample.cs" />
   </ItemGroup>
   <ItemGroup>
-    <ProjectReference Include="..\LiquidLevel.csproj" />
+    <ProjectReference Include="../../LiquidLevel.csproj" />
   </ItemGroup>
 </Project>