[07/10] New firmware versions online.

[manup]

ConBee II

http://deconz.dresden-elektronik.de/deconz-firmware/deCONZ_ConBeeII_0x26660700.bin.GCF

RaspBee II

http://deconz.dresden-elektronik.de/deconz-firmware/deCONZ_RaspBeeII_0x26660700.bin.GCF

RaspBee I and ConBee I

http://deconz.dresden-elektronik.de/deconz-firmware/deCONZ_Rpi_0x26390500.bin.GCF

• Fix frame counter not fresh enough after reboot or power-loss. This issue happened in some setups caused the network to be not reachable for a while (mostly 5–10 minutes sometimes hours).
• Fix ConBee I and RaspBee I PANID and Zigbee channel got scrambled under rare conditions.

[octupole]

I tried to update directly from the web application on a ubuntu 18.04 LTS system (an intel Nuc). Unfortunately, the upgrade to 26660700 failed and this made my Conbee II impossible to mount on the serial port. I tried to use the GCFFlasher_internal command, but it still failed, giving an error, not completing the upgrade numerous times before timing out. I resolved the issue by using a Windows 10 machine to do the firmware upgrade, see here. Was I the only one to have this problem?

[Smanar]

So it have worked on windows but not Ubuntu (No VM or docker) ? You still have the command used ?

[octupole]

Firmware upgrade has worked on Windows 10, not on Ubuntu 18.04 LTS. I didn't try the upgrade on docker or some VM system. Which commands? Now, everything - the phoscon app - works as before on my ubuntu box with a firmware upgraded Conbee II. I just wanted to inform others who might incur on the same issue.

[Smanar]

Which commands?

The command used for update the firmware, with GCFFlasher_internal ?

It's good to know, thx, but I don't understand, Ubuntu are real good OS.

[octupole]

I just upgraded to the latest firmware version, there is no point for me to try the GCFFlasher_internal command again. And most importantly, I don't want to screw up the Conbee II by using that command again. Before I did the upgrade on the Windows 10 machine I tried many times the command with no success. Maybe it is the machine it is mounted on, a 6 month old Intel NUC Kit NUC8i5BEH. It sometimes has given me problems with usb ports.

…

On Mon, Oct 12, 2020 at 5:51 PM Smanar ***@***.***> wrote: Which commands? The command used for update the firmware, with GCFFlasher_internal ? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#3377 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AH6ZFQ5WEAGGYBHIWCGBDFTSKMQXVANCNFSM4SHHC4TQ> .

[Claus1985]

What changes are included in the 26670700 release?
Flashed this because I thought it was the newest stable release 🙈

[SwoopX]

It resolved a rare situation where conbee II is stuck in permanent joining state, observable in deconz GUI.

[Martinvdm]

As far as i can see, we are now on ; 26680700
Any news from the release notes?

[manup]

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Firmware-Changelog