[This is simply a fork of guyc's awesome library, updated so that the wiringpi library references are changed to the wiringpi2 library.]
A library for interfacing hardware with the Raspberry Pi. Supports analog gauges, capacitance switches, RGB leds and other devices.
- Modules that use GPIO require WiringPi-Python.
- gaugette.ssd1306 requires spidev.
- gaugette.oauth2 requires Google's gdata.
import gaugette.ssd1306
RESET_PIN = 15
DC_PIN = 16
led = gaugette.ssd1306.SSD1306(reset_pin=RESET_PIN, dc_pin=DC_PIN)
led.begin()
led.clear_display()
led.draw_text2(0,0,'Hello World',2)
led.display()
from gaugette.fonts import arial_16
font = arial_16 # fonts are modules, instance does not need to be instantiated
led.draw_text3(0,0,'Hello World',font)
import gaugette.oauth
CLIENT_ID = 'your client_id here'
CLIENT_SECRET = 'your client secret here'
oauth = gaugette.oauth.OAuth(CLIENT_ID, CLIENT_SECRET)
if not oauth.has_token():
user_code = oauth.get_user_code()
print "Go to %s and enter the code %s" % (oauth.verification_url, user_code)
oauth.get_new_token()
import gaugette.capswitch
SWICH_PIN = 3
switch = gaugette.capswitch.CapSwitch(SWITCH_PIN)
while True:
if switch.sense():
print 'sensed'
import gaugette.rgbled
R_PIN = 4
G_PIN = 5
B_PIN = 6
led = gaugette.rgbled.RgbLed(R_PIN,R_PIN,B_PIN)
led.set(0,50,100)
led.fade(100,0,0)
import gaugette.rotary_encoder
A_PIN = 7
B_PIN = 9
encoder = gaugette.rotary_encoder.RotaryEncoder(A_PIN, B_PIN)
while True:
delta = encoder.delta()
if delta!=0:
print "rotate %d" % delta
import gaugette.switch
SW_PIN = 8
sw = gaugette.switch.Switch(SW_PIN)
last_state = sw.state()
while True:
state = sw.state()
if state != last_state:
print "switch %d" % state
last_state = state
http://guy.carpenter.id.au/gaugette/
You can use this code by checking it out into your source directory as follows:
cd myApplication
git clone git://github.com/guyc/py-gaugette.git
ln -s py-gaugette/gaugette gaugette
The soft link is created so that the local directory gaugette
will point to
py-gaugette/gaugette
which simplifies your import statements.
Alternatively if you want to install this module as a system-wide python module, you can do so as follows:
cd myPythonStuff
git clone git://github.com/guyc/py-gaugette.git
cd py-gaugette
sudo python setup.py install