Dark Wolf Solutions - Hack Our Drone

Repository for the Dark Wolf Hack Our Drone documentation.

Getting Started

UAV Power Up

1. Note the 4 hex characters on BeagleBone Blue board on the UAV
2. Verify that the SD Card is inserted into the BeagleBone Blue
3. Connect the 12V power adapter to the board
4. Wait for a minute or two for the boot up sequence to complete

GCS

1. Locate a phone with the matching 4 hex charactes as the UAV
2. Login into the Android phone
3. Open Wi-Fi settings
4. Verify the phone is connected to the SSID Airwolf- followed by the same 4 hex characters
5. Verify the static IP of the phone is set to 192.168.8.150
6. If steps 4 or 5 do not verify, contact a lab assistant.