Skip to content

e1ioan/rokuphp

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

48 Commits
 
 
 
 
 
 
 
 

Repository files navigation

Enable H.264/RTSP to HLS in IP Camera Viewer Pro on Roku

If you have some IP Cameras around the house that are ONVIF compliant or have h.264 video encoding, and if you like to get dirty in some DIY, this project is for you.

You will need a Raspberry Pi or an Orange Pi. I'm using for my tests the "Raspberry PI 3 Model B", but any Raspberry Pi with an Ethernet port or WiFi support should work. As for the Orange Pi, in my tests I used the Orange Pi Zero 512MB RAM version.

Note: This feature requires IP Camera Viewer Pro 2.7 or newer version on your Roku device.

Along with Raspberry Pi, the software that converts h.264 rtsp streams to HLS for the IP Camera Viewer Pro also works on Orange Pi. Tested on the $8 Pi Zero 512MB RAM version

To install the OS on the Orange Pi, follow this guide.

Orange Pi

After installing the OS on the Orange Pi, follow the guide bellow (skip to step 2) to install the software. For the Raspberry Pi, start with step 1.

1. Install Raspbian

You will need a Raspberry Pi. I'm using for my tests the "Raspberry PI 3 Model B", but any Raspberry Pi with an Ethernet port or WiFi support should work.

If you already have Raspbian installed on your Raspberry Pi, skip to 2

First, you need to install Raspbian OS on your Raspberry Pi. To do this, you can follow the instructions here: https://www.raspberrypi.org/learning/noobs-install/worksheet/ ... or on short, here is what you need to do:

  1. Download NOOBS https://www.raspberrypi.org/downloads/noobs/
  2. Unzip it and copy the content to a micro sd card
  3. Put the micro sd card in your Raspberry Pi
  4. Connect usb keyboard, mouse, a network cable and a HDMI monitor or TV to the Raspberry Pi
  5. Connect the power to the Raspberry Pi and follow the instructions.
  6. When asked what OS to install, select Raspbian (make sure at the bottom of the screen you select the right Language and Keyboard

2. Install H.264/RTSP to HLS on the Pi

Note: You can use H.264 to HLS on the Pi along with any other software you want to use, for example Retro Pie. My software gets along just fine with almost anything else.

Wait for the Raspbian OS install to be done and then, open a console window and type:

wget https://raw.githubusercontent.com/e1ioan/rokuphp/master/install.sh
chmod +x install.sh
sudo ./install.sh

If php7 fails to install, you can try installing php5 using the following set of commands:

wget https://raw.githubusercontent.com/e1ioan/rokuphp/master/installphp5.sh
chmod +x installphp5.sh
sudo ./installphp5.sh

You will be shown two option:

  1. To clean intall, which is recommended, will remove - if already installed - ffmpeg, apache2, php and then clean install and configure the packages
  2. Dirty install, which will leave all the packages alone if already installed, and just try to configure them.

Select 1 or 2 and wait for "DONE INSTALL" message.

At this point, if you didn't receive any errors, you are ready to go. Open IP Camera Viewer Pro on Roku, go into Settings and in the field PiIP enter the the install script showed at the end.

To configure the cameras, in a browser enter the IP, create a user, log in... and create cameras.

The cameras created will be imported automatically to IP Camera Viewer Pro on Roku.

3. Adding Cameras using Web Interface

pic

If in any browser, you open your Raspberry Pi IP address, you will be able to configure your cameras. On the Roku you don't need to do anything, the cameras will be imported automatically from the Pi. Lets say the IP for you Raspberry Pi is 192.168.1.70. You open this address in your browser http://192.168.1.70 (on the phone or computer) and you'll get to the Login page:

pic

After Login in, you get to the "menu" page where you can see a list of all the cameras you already added and the "services" available:

pic

First option, will allow you to add rtsp cameras manually:

pic

pic

The second option will allow you to add any ONVIF compliant camera:

pic

All the cameras added will be automatically imported on Roku.

Of course you will be able to edit/delete any of the cameras

pic

The last option, has nothing to do with Roku (no roku necessary), but I thought it will be nice to be there: You can broadcast live on youtube or twitch your IP camera with a click of the button: pic

pic

So that's about it! 

Here is a youtube video showing the Roku playing a h.264 rtsp live stream coming from an Axis IP camera. Of course, audio is supported:

DEMO Video

Let me know what you think. Thank you!

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages