Working from Source Code

Jad El-khoury edited this page Nov 13, 2018 · 5 revisions

The instructions below help you setup an eclipse environment for developing or testing the Lyo plugins from the latest available source code.

Besides the OSLC4J SDK, the Lyo project contains 2 eclipse plugins that help you develop OSLC-based applications:

  1. The Lyo Modeller - allows you to graphically model an oslc4j-based toolchain.
  2. The Lyo Code Generator - generates java code based on the toolchain model.

The instructions below support three setups that depend on which aspect of the plugins you plan to test or develop:

  • Scenario1 - Testing or using the Lyo plugins based on the latest versions of the source code
  • Scenario2 - Developing the Lyo Modeller plugin (with less concern about the code generation)
  • Scenario3 - Developing the Code Generator plugin (with less concern about the graphical modelling capabilities)

To simply use the latest plugin release, the reader is referred to the Lyo Designer User Manual instead.

Eclipse Setup

If you desire to work with the source code of the modelling tool, the following once-only installation and configuration of your Eclipse environment are required:

  1. Make sure your environment is setup for OSLC4J development as instructed on General Setup for OSLC4J development
  2. Uninstall any current Lyo plugins from your Eclipse workspace
    • To avoid confusions, it is recommended to run different Eclipse workspaces for Lyo plugin binaries, and running from source code.
  3. Install the following additional Eclipse packages
    1. Acceleo
    2. Sirius Specifier Environment
    3. A suitable EMF editor such as "EMF Facet SDK"* or "EMF - Eclipse Modeling Framework SDK" .
    4. Eclipse Plugin Development Environment
  4. Clone the OSLC Tools repository git://
  5. View the Git repository in Eclipse
    1. Open the Git Repositories perspective in Eclipse
    2. Click the Add an existing local Git repository icon.
    3. Select the repository
    4. The repository should now show up in your Git Repositories view
  6. Import the necessary Eclipse projects from the Git repository
    1. In the Git Repositories view, right click the repository and select Import Projects
    2. Select the Import Existing Projects wizard and click next
    3. Select all projects.
  7. Create a new Eclipse Application configuration called Tool Chain Design
    1. Select Run > Run Configurations ...
    2. Select Eclipse Application
    3. Press New button to create a new configuration
    4. In the new dialog,
      1. Set name to Tool Chain Design
      2. In Arguments tab, change VM argument value to -Xms256m -Xmx768m

Testing or using the Lyo plugins

To test or use the Lyo plugins based on the latest versions of the source code:

  1. Run the Tool Chain Design configuration (created above) in order to run a new Eclipse workspace with the required plugins
    1. Select Run > Run Configurations ...
    2. Select the Tool Chain Design configuration
    3. Press Run
  2. In the new Tool Chain Design Eclipse workspace, switch to the Sirius perspective
  3. Proceed with the modelling and generation as instructed in the Lyo Designer Manual

Developing the Lyo Modeller plugin

To develop the Lyo Modeller plugin (with less concern about the code generation):

  1. Run the Tool Chain Design configuration (created above)
  2. create a Toolchain Modelling project as instructed in the Testing or using the Lyo plugins section above.
  3. Switch to the Sirius perspective
  4. Import the eclipse project into the Eclipse workspace from the OSLC Tools git repository.
  5. open and modify the description/ToolChainModel.odesign file as necessary.
    • You can now see the effects of your changes directly on any opened Lyo Modelling views.

Developing the Code Generator plugin

To develop the Code Generator plugin (with less concern about the graphical modelling capabilities):

  1. In the primary Eclipse workspace, modify the Acceleo template files in the project as necessary.
  2. Build the generator by selecting the menu item Project --> Build Project

Configure and run the adaptor generator

To run the code generator from soure code, the following steps are needed:

  1. Define a "run configuration" for adaptor code generation
    1. Select Run --> Run Configurations...
    2. Select Acceleo Application
    3. Press the New launch configuration button
      1. Name: something practical such as Generate YourProviderProjectName
      2. Project: select the org.eclipse.lyo.oslc4j.codegenerator project
      3. Main class: org.eclipse.lyo.oslc4j.codegenerator.main.Generate
      4. Model: the newly created adaptormodel in the YourProviderProjectName project
      5. Target: The YourProviderProjectName project
      6. Runner: Acceleo Plug-in Application
    4. Press Apply
    5. Press Close.
  2. Once you are satisfied with your model, you can generate the adaptor code:
    1. Select Run > Run Configurations ...
    2. Select the Generate YourProviderProjectName configuration
    3. Press Run

Create a new adaptorInterface model

To test the code generator changes, you can run an Acceleo generation configuration on any toolchain model. In most cases, it is more convenient to create the models graphically using the existing Lyo plugins - using another Eclipse workspace with the plugins installed.

You can however create and modify an adaptorInterface model within your source code environment, with the following steps:

  1. Open the adaptorInterface.ecore model in the org.eclipse.lyo.oslc4j.adaptormodel project (folder model)
  2. Expand the ecore model until the AdaptorInterface EClass
  3. Right-click on the AdaptorInterface EClass & select Create Dynamic Instance...
  4. In the dialog that appears
    1. select the folder adaptorModel under the YourProviderProjectName project as the "parent folder"
    2. choose a suitable File name for the adaptor model - AdaptorInterface.xmi is fine.
  5. Right-click on the newly created AdaptorInterface.xmi file, and select open with --> Other... --> EMF Facet Model Browser.

Problems when composing models

Did you compose your model from other models and reference some of its elements in your adaptor model? Currently, the way EMF models reference each other in the xmi files causes problems with the code generator. Before you trigger the code generator, perform the following steps: (These steps need to be repeated if the adaptor model is later changed to include further references).

  1. Copy the workspace location of any loaded resources (EMF models)
    1. In the Project Explorer window, right-click on the AdaptorInterface.xmi file, and select open with --> Other ... --> Sample Reflective Ecore Model Editor.
    2. In the newly opened window, right-click and select the context menu Load Resource ...
    3. Select Browse Workspace...
    4. Select the domain specification EMF model that you have earlier loaded.
    5. Copy the path to the xmi file selected into the clipboard (it will be something like platform:/resource/org.eclipse.lyo.oslc4j.adaptormodel/model/someSpecification.xmi)
    6. Press Cancel.
  2. In the Project Explorer window, right-click on the AdaptorInterface.xmi file, and select open with --> XML Editor
  3. Search and replace each href entry that refers to your domain specification.
    1. Replace href values that look like href="../../org.eclipse.lyo.oslc4j.adaptormodel/model/someSpecification.xmi#//... with the copied value (which ought to look more like href="platform:/resource/org.eclipse.lyo.oslc4j.adaptormodel/model/someSpecification.xmi#//...").
  4. Repeat these steps for each domain specification model you have loaded and referenced.

Problems opening an Adaptor Model using the EMF editor

When running from source, the metamodels are not available in the Eclipse workspace, which causes errors when trying to open the models using an EMF editor.

Although the models can be used to generate code from, it may sometimes be desired to edit them beforehand.

Edit the models and manually add the pathes as follows:

<oslc4j_tc:Toolchain ….. xsi:schemaLocation="http://org.eclipse.lyo/oslc4j/toolChain ../org.eclipse.lyo.oslc4j.adaptormodel/model/toolchain.ecore" …>

<adaptorInterfaces xsi:schemaLocation="http://org.eclipse.lyo/oslc4j/adaptorInterface ../org.eclipse.lyo.oslc4j.adaptormodel/model/adaptorInterface.ecore" name="Testing Tool" …>
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.