Skip to content

electricimp/ConnectionManager

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ConnectionManager 3.1.1

The ConnectionManager class is an Electric Imp device-side library created to simplify connect and disconnect flows.

Note If you are using ConnectionManager in your code, you should ensure that you never call server.connect() or server.disconnect(). Instead you should only use ConnectionManager’s connect() and disconnect() methods.

To include this library in your project, add #require "ConnectionManager.lib.nut:3.1.1" at the top of your device code.

Build Status

Class Usage

Constructor: ConnectionManager([settings])

ConnectionManager can be instantiated with an optional table of settings that modify its behavior. The following settings are available:

Key Required? Description
startBehavior No See below. Default: CM_START_NO_ACTION
stayConnected No When set to true, the device will aggressively attempt to reconnect when disconnected. Default: false
retryOnTimeout No When set to true, the device will attempt to connect again if it times out. Default: true
blinkupBehavior No See below. Default: CM_BLINK_ON_DISCONNECT
checkTimeout No Changes how often the ConnectionManager checks the connection state (online/offline. Default: 5
connectTimeout No Maximum time (in seconds) allowed for the imp to connect to the server before timing out. Default: 60.0
errorPolicy No The disconnection handling policy: SUSPEND_ON_ERROR, *RETURN_ON_ERROR or RETURN_ON_ERROR_NO_DISCONNECT. Default: RETURN_ON_ERROR
waitPolicy No The successful transmission criterion: either WAIT_TIL_SENT or WAIT_FOR_ACK. Default: WAIT_TIL_SENT
ackTimeout No The maximum time (in seconds) allowed for the server to acknowledge receipt of data. Default: 1.0

Example

#require "ConnectionManager.lib.nut:3.1.1"

// Instantiate ConnectionManager so BlinkUp is always enabled,
// and we automatically aggressively try to reconnect on disconnect
cm <- ConnectionManager({ "blinkupBehavior": CM_BLINK_ALWAYS,
                          "stayConnected"  : true });

// Set the recommended buffer size (see note below)
imp.setsendbuffersize(8096);

Note We’ve found setting the buffer size to 8096 to be very helpful in many applications using ConnectionManager, though your application may require a different buffer size.

Setting: startBehavior

The startBehavior flag modifies what action ConnectionManager takes when initialized:

  • CM_START_NO_ACTION will take no action after being initialized. This is the default value.
  • CM_START_CONNECTED will try to connect after being initialized.
  • CM_START_DISCONNECTED will disconnect after being initialized.

Setting: blinkupBehavior

The blinkupBehavior flag modifies when ConnectionManager enables the BlinkUp™ circuit (using imp.enableblinkup():

  • CM_BLINK_ON_DISCONNECT will enable BlinkUp while the imp is disconnected. This is the default value.
  • CM_BLINK_ON_CONNECT will enable BlinkUp while the imp is connected.
  • CM_BLINK_ALWAYS will ensure the BlinkUp circuit is always active.
  • CM_BLINK_NEVER will ensure the BlinkUp circuit is never active.

Important impOS™ 40 always enables the BlinkUp circuit for the first 60 seconds after a cold boot to ensure the imp never enters an unrecoverable state. As a result, regardless of what blinkupBehavior flag is set, the imp will enable the BlinkUp circuit for 60 seconds after a cold boot. However, impOS 42 changes this behavior: BlinkUp is disabled as soon as impOS is asked to do so, even within the initial 60-second period. If your code disables BlinkUp early, end-users may have as little as ten seconds to perform BlinkUp. Please see the imp.enableblinkup() documentation for more guidance.

Setting: ackTimeout

This value is passed into the imp API method server.setsendtimeoutpolicy(), overriding any value your code may have already set in a separate call to that method (or overridden by a subsequent call your code makes). We recommend that if you make use of ConnectionManager, you ensure that you never call server.setsendtimeoutpolicy() in your application code.

Class Methods

setBlinkUpBehavior(blinkupBehaviorFlag)

This method can be used to change the class’ BlinkUp behavior.

Parameters

See above.

Returns

Nothing.

Example

// Set ConnectionManager to enable BlinkUp only while it's connected
cm.setBlinkUpBehavior(CM_BLINK_ON_CONNECT);

isConnected()

This method can be used to determine the value of ConnectionManager’s internal connection state flag (ie. whether or not the imp is connected). This flag is updated every five seconds, or as set by the checkTimeout setting in the constructor.

Returns

Boolean — true if the device is connected, otherwise false.

Example

if (!cm.isConnected()) {
    // If we're not connected, gather some data, then connect
    cm.onNextConnect(function() {
        local data = sensor.read();
        agent.send("data", data);
    }).connect();
}

onDisconnect(callback[, callbackID])

This method assigns a callback function to the onDisconnect event. The onDisconnect event will fire every time the connection state changes from online to offline, or when ConnectionManager’s disconnect() method is called (even if the device is already disconnected).

ConnectionManager allows multiple onDisconnect callbacks to be registered. Each of the callbacks should have a unique string identifier passed into the second parameter, callbackID. If the callbackID parameter’s argument is not specified, a default value is used ("DEFAULT_CB_ID"). Calling onDisconnect() multiple times with the same or no callbackID overwrites the previously set callback.

Pass null into callback to clear the onDisconnect callback for the specified (or the default) callback ID.

Parameters

Parameter Data Type Required Description
callback Function Yes Called when ConnectionManager’s connection state changes from online to offline. See below for details
callbackID String No Optional identifier

The onDisconnect Callback

The callback function has a single parameter, expected, which is true when the onDisconnect event fired due to disconnect() being called, and false otherwise (an unexpected state change from connected to disconnected).

Returns

Nothing.

Example

cm.onDisconnect(function(expected) {
    if (expected) {
        // Log a regular message that we disconnected as expected
        cm.log("Expected Disconnect");
    } else {
        // Log an error message that we unexpectedly disconnected
        cm.error("Unexpected Disconnect");
    }
});

onConnect(callback[, callbackID])

This method assigns a callback function to the onConnect event. The onConnect event will fire every time the connection state changes from offline to online, or when ConnectionManager’s connect() method is called (even if the device is already connected).

ConnectionManager allows multiple onConnect callbacks to be registered. Each of the callbacks should have a unique string identifier passed into the second parameter, callbackID. If the callbackID parameter’s argument is not specified, a default value is used ("DEFAULT_CB_ID"). Calling onConnect() multiple times with the same or no callbackId overwrites the previously set callback.

Pass null into callback to clear the onConnect callback for the specified (or the default) callback ID.

Parameters

Parameter Data Type Required Description
callback Function Yes Called when ConnectionManager’s connection state changes from offline to online. The callback function has no parameters
callbackID String No Optional identifier

Returns

Nothing.

Example

cm.onConnect(function() {
    // Send a message to the agent indicating that we're online
    agent.send("online", true);
});

onTimeout(callback[, callbackID])

This method assigns a callback function to the onTimeout event. The onTimeout event will fire every time the device attempts to connect but does not succeed.

ConnectionManager allows multiple onTimeout callbacks to be registered. Each of the callbacks should have a unique string identifier passed into the second parameter, callbackID. If the callbackID parameter’s argument is not specified, a default value is used ("DEFAULT_CB_ID"). Calling onTimeout() multiple times with the same or no callbackID overwrites the previously set callback.

Pass null into callback to clear the onTimeout callback for the specified (or the default) callback ID.

Parameters

Parameter Data Type Required Description
callback Function Yes Called when the device attempts to connect but fails to do so. The callback function has no parameters
callbackID String No Optional identifier

Returns

Nothing.

Example

cm.onTimeout(function() {
    // Go to sleep for 10 minutes if the device fails to connect
    server.sleepfor(600);
});

onNextConnect(callback)

This method queues a function to run the next time the device connects for whatever reason. If the device is already connected, the callback will be invoked immediately. There is no limit on the number of tasks that can be queued (excluding any memory or time restraints your application may have).

Parameters

Parameter Data Type Required Description
callback Function Yes Called when the device next connects, or is connected already. The callback function has no parameters

Returns

Nothing.

Example

function poll() {
    // Wake up every 60 seconds and gather data
    imp.wakeup(60, poll);

    // Read the data, and insert the timestamp into the data table
    // (in this example, we assume sensor.read() returns a table)
    local data = sensor.read();
    data.ts <- time();

    // Send the data the next time we connect
    cm.onNextConnect(function() {
        agent.send("data", data);
    });
}

Note If the imp enters a deep sleep or performs a cold boot, the task queue will be cleared.

connectFor(callback)

This method tells the device to connect, run the supplied callback function, and then disconnect when complete. If the device is already connected, the callback will be invoked immediately, and the device will disconnect upon completion.

Parameters

Parameter Data Type Required Description
callback Function Yes Called when the device has connected, or is connected already. The callback function has no parameters

Returns

Nothing.

Example

function poll() {
    // Wake up every 60 seconds, connect, send data and disconnect
    imp.wakeup(60, poll);

    cm.connectFor(function() {
        // Read and send the data
        local data = sensor.read();
        data.ts <- time();
        agent.send("data", data);
    });
}

Note The connectFor() method is equivalent to:

cm.onNextConnect(function() {
    // Do something
    ...
    cm.disconnect();
}).connect();

connect()

This method tells ConnectionManager to attempt to connect to the server. If it successfully connects (or is already connected), ConnectionManager will execute any registered onConnect callback, perform any tasks queued from onNextConnect, and log all offline log messages (from log() and error()).

If a connection attempt is already in process, connect() will not attempt to connect or invoke any callbacks.

Returns

Boolean — true if ConnectionManager is now attempting to connect, or false if a connection attempt is already in process.

Example

cm.connect();

disconnect([force][, flushTimeout])

This method tells ConnectionManager to attempt to disconnect from the server. If it successfully disconnects (or is already disconnected), the ConnectionManager will execute the registered onDisconnect callback, if there is one.

If a connection attempt is in process, disconnect() will not attempt to disconnect or invoke any callbacks.

Parameters

Parameter Data Type Required Description
force Boolean No Force ConnectionManager to disconnect regardless of the connection status (ie. whether it’s in progress or not). Default: false
flushTimeout Integer or float No The timeout value used for server.flush() calls. If set to -1, no flush is performed. Default: CM_FLUSH_TIMEOUT (30 seconds)

Returns

Boolean — true if ConnectionManager is now attempting to disconnect, otherwise false.

Example

cm.disconnect();

log(message)

This method will execute a server.log() command (if connected), or queue the value of message to be logged on the next connect. Any object that can be passed to server.log() can be passed to log().

Note ConnectionManager stores log messages in memory but doesn’t persist them across deep sleeps and cold boots.

Returns

Nothing.

Example

cm.onDisconnect(function(expected) {
    if (expected) {
        // Log a regular message that we disconnected as expected
        cm.log("Expected Disconnect");
    } else {
        // Log an error message that we unexpectedly disconnected
        cm.error("Unexpected Disconnect");
    }
});

error(message)

The error() method will execute a server.error() command (if connected), or queue the value of errorMessage to be logged on the next connect. Any object that can be passed to server.error() can be passed to error().

Note ConnectionManager stores error messages in memory but doesn’t persist them across deep sleeps and cold boots.

Returns

Nothing.

Example

See log(), above, for example code.

Running Tests

Some tests change the test device’s WiFi configuration. To ensure that the test device’s WiFi settings are restored after the test run, you should set the environment variables CM_TEST_SSID and CM_TEST_PWD to the required WiFi SSID and password, respectively.

Alternatively, you can create an .imptest-builder file with CM_TEST_SSID and CM_TEST_PWD defined within it. For example:

{ "CM_TEST_SSID": "<YOUR_WIFI_SSID>",
  "CM_TEST_PWD" : "<YOUR_WIFI_PASSWORD>" }

License

This library is licensed under the MIT License.