Add circular-buffer exercise

config.json

@@ -805,6 +805,14 @@
         "practices": [],
         "prerequisites": [],
         "difficulty": 2
+      },
+      {
+        "slug": "circular-buffer",
+        "name": "Circular Buffer",
+        "uuid": "a38d085f-adff-4458-b4fd-c35bba426803",
+        "practices": [],
+        "prerequisites": [],
+        "difficulty": 3
       }
     ]
   },

exercises/practice/circular-buffer/.docs/instructions.md

@@ -0,0 +1,58 @@
+# Instructions
+
+A circular buffer, cyclic buffer or ring buffer is a data structure that uses a single, fixed-size buffer as if it were connected end-to-end.
+
+A circular buffer first starts empty and of some predefined length.
+For example, this is a 7-element buffer:
+
+```text
+[ ][ ][ ][ ][ ][ ][ ]
+```
+
+Assume that a 1 is written into the middle of the buffer (exact starting location does not matter in a circular buffer):
+
+```text
+[ ][ ][ ][1][ ][ ][ ]
+```
+
+Then assume that two more elements are added — 2 & 3 — which get appended after the 1:
+
+```text
+[ ][ ][ ][1][2][3][ ]
+```
+
+If two elements are then removed from the buffer, the oldest values inside the buffer are removed.
+The two elements removed, in this case, are 1 & 2, leaving the buffer with just a 3:
+
+```text
+[ ][ ][ ][ ][ ][3][ ]
+```
+
+If the buffer has 7 elements then it is completely full:
+
+```text
+[5][6][7][8][9][3][4]
+```
+
+When the buffer is full an error will be raised, alerting the client that further writes are blocked until a slot becomes free.
+
+When the buffer is full, the client can opt to overwrite the oldest data with a forced write.
+In this case, two more elements — A & B — are added and they overwrite the 3 & 4:
+
+```text
+[5][6][7][8][9][A][B]
+```
+
+3 & 4 have been replaced by A & B making 5 now the oldest data in the buffer.
+Finally, if two elements are removed then what would be returned is 5 & 6 yielding the buffer:
+
+```text
+[ ][ ][7][8][9][A][B]
+```
+
+Because there is space available, if the client again uses overwrite to store C & D then the space where 5 & 6 were stored previously will be used not the location of 7 & 8.
+7 is still the oldest element and the buffer is once again full.
+
+```text
+[C][D][7][8][9][A][B]
+```

exercises/practice/circular-buffer/.meta/config.json

@@ -0,0 +1,19 @@
+{
+  "authors": [
+    "glennj"
+  ],
+  "files": {
+    "solution": [
+      "src/main/groovy/CircularBuffer.groovy"
+    ],
+    "test": [
+      "src/test/groovy/CircularBufferSpec.groovy"
+    ],
+    "example": [
+      ".meta/src/reference/groovy/CircularBuffer.groovy"
+    ]
+  },
+  "blurb": "A data structure that uses a single, fixed-size buffer as if it were connected end-to-end.",
+  "source": "Wikipedia",
+  "source_url": "https://en.wikipedia.org/wiki/Circular_buffer"
+}

exercises/practice/circular-buffer/.meta/src/reference/groovy/CircularBuffer.groovy

@@ -0,0 +1,42 @@
+class EmptyBufferException extends Exception {}
+class FullBufferException extends Exception {}
+
+class CircularBuffer {
+    int capacity
+    List data
+
+    CircularBuffer(int capacity) {
+        this.capacity = capacity
+        clear()
+    }
+
+    def clear() {
+        this.data = []
+    }
+
+    def isEmpty() {
+        return this.data.isEmpty()
+    }
+
+    def read() {
+        if (isEmpty())
+            throw new EmptyBufferException()
+        return this.data.pop()
+    }
+
+    def isFull() {
+        return this.data.size() == this.capacity
+    }
+
+    def write(int item) {
+        if (isFull())
+            throw new FullBufferException()
+        this.data << item
+    }
+
+    def overwrite(int item) {
+        if (isFull())
+            read()
+        write(item)
+    }
+}

exercises/practice/circular-buffer/.meta/tests.toml

@@ -0,0 +1,52 @@
+# This is an auto-generated file.
+#
+# Regenerating this file via `configlet sync` will:
+# - Recreate every `description` key/value pair
+# - Recreate every `reimplements` key/value pair, where they exist in problem-specifications
+# - Remove any `include = true` key/value pair (an omitted `include` key implies inclusion)
+# - Preserve any other key/value pair
+#
+# As user-added comments (using the # character) will be removed when this file
+# is regenerated, comments can be added via a `comment` key.
+
+[28268ed4-4ff3-45f3-820e-895b44d53dfa]
+description = "reading empty buffer should fail"
+
+[2e6db04a-58a1-425d-ade8-ac30b5f318f3]
+description = "can read an item just written"
+
+[90741fe8-a448-45ce-be2b-de009a24c144]
+description = "each item may only be read once"
+
+[be0e62d5-da9c-47a8-b037-5db21827baa7]
+description = "items are read in the order they are written"
+
+[2af22046-3e44-4235-bfe6-05ba60439d38]
+description = "full buffer can't be written to"
+
+[547d192c-bbf0-4369-b8fa-fc37e71f2393]
+description = "a read frees up capacity for another write"
+
+[04a56659-3a81-4113-816b-6ecb659b4471]
+description = "read position is maintained even across multiple writes"
+
+[60c3a19a-81a7-43d7-bb0a-f07242b1111f]
+description = "items cleared out of buffer can't be read"
+
+[45f3ae89-3470-49f3-b50e-362e4b330a59]
+description = "clear frees up capacity for another write"
+
+[e1ac5170-a026-4725-bfbe-0cf332eddecd]
+description = "clear does nothing on empty buffer"
+
+[9c2d4f26-3ec7-453f-a895-7e7ff8ae7b5b]
+description = "overwrite acts like write on non-full buffer"
+
+[880f916b-5039-475c-bd5c-83463c36a147]
+description = "overwrite replaces the oldest item on full buffer"
+
+[bfecab5b-aca1-4fab-a2b0-cd4af2b053c3]
+description = "overwrite replaces the oldest item remaining in buffer following a read"
+
+[9cebe63a-c405-437b-8b62-e3fdc1ecec5a]
+description = "initial clear does not affect wrapping around"

exercises/practice/circular-buffer/build.gradle

@@ -0,0 +1,18 @@
+apply plugin: "groovy"
+
+repositories {
+    mavenCentral()
+}
+
+dependencies {
+    testImplementation "org.spockframework:spock-core:2.0-M2-groovy-3.0"
+    implementation "org.codehaus.groovy:groovy-all:3.0.2"
+}
+
+test {
+    useJUnitPlatform()
+    testLogging {
+        exceptionFormat = 'full'
+        events = ["passed", "failed", "skipped"]
+    }
+}

exercises/practice/circular-buffer/gradle/wrapper/gradle-wrapper.properties

@@ -0,0 +1,5 @@
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-6.2-bin.zip
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists

exercises/practice/circular-buffer/gradlew

@@ -0,0 +1,183 @@
+#!/usr/bin/env sh
+
+#
+# Copyright 2015 the original author or authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+##############################################################################
+##
+##  Gradle start up script for UN*X
+##
+##############################################################################
+
+# Attempt to set APP_HOME
+# Resolve links: $0 may be a link
+PRG="$0"
+# Need this for relative symlinks.
+while [ -h "$PRG" ] ; do
+    ls=`ls -ld "$PRG"`
+    link=`expr "$ls" : '.*-> \(.*\)$'`
+    if expr "$link" : '/.*' > /dev/null; then
+        PRG="$link"
+    else
+        PRG=`dirname "$PRG"`"/$link"
+    fi
+done
+SAVED="`pwd`"
+cd "`dirname \"$PRG\"`/" >/dev/null
+APP_HOME="`pwd -P`"
+cd "$SAVED" >/dev/null
+
+APP_NAME="Gradle"
+APP_BASE_NAME=`basename "$0"`
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD="maximum"
+
+warn () {
+    echo "$*"
+}
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+}
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "`uname`" in
+  CYGWIN* )
+    cygwin=true
+    ;;
+  Darwin* )
+    darwin=true
+    ;;
+  MINGW* )
+    msys=true
+    ;;
+  NONSTOP* )
+    nonstop=true
+    ;;
+esac
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD="$JAVA_HOME/jre/sh/java"
+    else
+        JAVACMD="$JAVA_HOME/bin/java"
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD="java"
+    which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+fi
+
+# Increase the maximum file descriptors if we can.
+if [ "$cygwin" = "false" -a "$darwin" = "false" -a "$nonstop" = "false" ] ; then
+    MAX_FD_LIMIT=`ulimit -H -n`
+    if [ $? -eq 0 ] ; then
+        if [ "$MAX_FD" = "maximum" -o "$MAX_FD" = "max" ] ; then
+            MAX_FD="$MAX_FD_LIMIT"
+        fi
+        ulimit -n $MAX_FD
+        if [ $? -ne 0 ] ; then
+            warn "Could not set maximum file descriptor limit: $MAX_FD"
+        fi
+    else
+        warn "Could not query maximum file descriptor limit: $MAX_FD_LIMIT"
+    fi
+fi
+
+# For Darwin, add options to specify how the application appears in the dock
+if $darwin; then
+    GRADLE_OPTS="$GRADLE_OPTS \"-Xdock:name=$APP_NAME\" \"-Xdock:icon=$APP_HOME/media/gradle.icns\""
+fi
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if [ "$cygwin" = "true" -o "$msys" = "true" ] ; then
+    APP_HOME=`cygpath --path --mixed "$APP_HOME"`
+    CLASSPATH=`cygpath --path --mixed "$CLASSPATH"`
+    JAVACMD=`cygpath --unix "$JAVACMD"`
+
+    # We build the pattern for arguments to be converted via cygpath
+    ROOTDIRSRAW=`find -L / -maxdepth 1 -mindepth 1 -type d 2>/dev/null`
+    SEP=""
+    for dir in $ROOTDIRSRAW ; do
+        ROOTDIRS="$ROOTDIRS$SEP$dir"
+        SEP="|"
+    done
+    OURCYGPATTERN="(^($ROOTDIRS))"
+    # Add a user-defined pattern to the cygpath arguments
+    if [ "$GRADLE_CYGPATTERN" != "" ] ; then
+        OURCYGPATTERN="$OURCYGPATTERN|($GRADLE_CYGPATTERN)"
+    fi
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    i=0
+    for arg in "$@" ; do
+        CHECK=`echo "$arg"|egrep -c "$OURCYGPATTERN" -`
+        CHECK2=`echo "$arg"|egrep -c "^-"`                                 ### Determine if an option
+
+        if [ $CHECK -ne 0 ] && [ $CHECK2 -eq 0 ] ; then                    ### Added a condition
+            eval `echo args$i`=`cygpath --path --ignore --mixed "$arg"`
+        else
+            eval `echo args$i`="\"$arg\""
+        fi
+        i=`expr $i + 1`
+    done
+    case $i in
+        0) set -- ;;
+        1) set -- "$args0" ;;
+        2) set -- "$args0" "$args1" ;;
+        3) set -- "$args0" "$args1" "$args2" ;;
+        4) set -- "$args0" "$args1" "$args2" "$args3" ;;
+        5) set -- "$args0" "$args1" "$args2" "$args3" "$args4" ;;
+        6) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" ;;
+        7) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" ;;
+        8) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" ;;
+        9) set -- "$args0" "$args1" "$args2" "$args3" "$args4" "$args5" "$args6" "$args7" "$args8" ;;
+    esac
+fi
+
+# Escape application args
+save () {
+    for i do printf %s\\n "$i" | sed "s/'/'\\\\''/g;1s/^/'/;\$s/\$/' \\\\/" ; done
+    echo " "
+}
+APP_ARGS=`save "$@"`
+
+# Collect all arguments for the java command, following the shell quoting and substitution rules
+eval set -- $DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS "\"-Dorg.gradle.appname=$APP_BASE_NAME\"" -classpath "\"$CLASSPATH\"" org.gradle.wrapper.GradleWrapperMain "$APP_ARGS"
+
+exec "$JAVACMD" "$@"