Slice & print

web application for Raspberry to upload stl -->check-->create gcode ???--->print. Currently no print

what i use:

• Admesh https://sites.google.com/a/varlog.com/www/admesh-htm (this git contain source code of this because i make little modified code)
  
• Cura_engine (contain Bin but for new bin compile lastes from https://github.com/Ultimaker/CuraEngine)
  
• Python cgi
  

Is very early version...need work too much:

• On webpage (take nice graph and add value check)
  
• Cgi script (real time log from admesh and cura...)
  
• Send directly gcode for print software.....i want use 5dprint because i hope earlier have a Makibox at home :)
  

Preset work but need configure fine file (no have a 3d printer and no have possible to set it :D )

Thanks too much at:
Ulimaker and David from great cura... and thanks for cura-engine it work very fine on Raspberry pi
amartin@varlog.com for ADMesh


Thanks at all and any suggesition or help are welcome!
Mauro
exilaus@hotmail.com how start it
Use the console to go in Slice_n_print directory and run the following commands:

sudo cp Shape_service /etc/init.d/service_slicee
sudo chmod 755 /etc/init.d/service_slice
sudo update-rc.d service_slice defaults

Now every time the Rarpberry pi is started it also runs a simple python cgi webserver on port 7001

If you do not want reboot the Raspberry Pi you can run the server with this command:

./etc/init.d/Sservice_slice start

or likewise you can stop it with this one:

./etc/init.d/service_slice stop

Now open your browser and play