Add executionClusterLabel

flytectl/cmd/create/execution.go

@@ -79,36 +79,56 @@ The generated spec file can be modified to change the envs values, as shown belo
     task: core.control_flow.merge_sort.merge
     version: "v2"
 
-4. Run the execution by passing the generated YAML file.
+4. [Optional] Update the TargetExecutionCluster, if needed.
+The generated spec file can be modified to change the TargetExecutionCluster values, as shown below:
+
+.. code-block:: yaml
+
+    iamRoleARN: ""
+    inputs:
+    sorted_list1:
+    - 0
+    sorted_list2:
+    - 0
+    envs:
+      foo: bar
+    kubeServiceAcct: ""
+    targetDomain: ""
+    targetProject: ""
+	targetExecutionCluster: ""
+    task: core.control_flow.merge_sort.merge
+    version: "v2"
+
+5. Run the execution by passing the generated YAML file.
 The file can then be passed through the command line.
 It is worth noting that the source's and target's project and domain can be different.
 ::
 
 	flytectl create execution --execFile execution_spec.yaml -p flytesnacks -d staging --targetProject flytesnacks
 
-5. To relaunch an execution, pass the current execution ID as follows:
+6. To relaunch an execution, pass the current execution ID as follows:
 
 ::
 
  flytectl create execution --relaunch ffb31066a0f8b4d52b77 -p flytesnacks -d development
 
-6. To recover an execution, i.e., recreate it from the last known failure point for previously-run workflow execution, run:
+7. To recover an execution, i.e., recreate it from the last known failure point for previously-run workflow execution, run:
 
 ::
 
  flytectl create execution --recover ffb31066a0f8b4d52b77 -p flytesnacks -d development
 
 See :ref:` + "`ref_flyteidl.admin.ExecutionRecoverRequest`" + ` for more details.
 
-7. You can create executions idempotently by naming them. This is also a way to *name* an execution for discovery. Note,
+8. You can create executions idempotently by naming them. This is also a way to *name* an execution for discovery. Note,
 an execution id has to be unique within a project domain. So if the *name* matches an existing execution an already exists exceptioj
 will be raised.
 
 ::
 
    flytectl create execution --recover ffb31066a0f8b4d52b77 -p flytesnacks -d development custom_name
 
-8. Generic/Struct/Dataclass/JSON types are supported for execution in a similar manner.
+9. Generic/Struct/Dataclass/JSON types are supported for execution in a similar manner.
 The following is an example of how generic data can be specified while creating the execution.
 
 ::
@@ -128,7 +148,7 @@ The generated file would look similar to this. Here, empty values have been dump
     task: core.type_system.custom_objects.add
     version: v3
 
-9. Modified file with struct data populated for 'x' and 'y' parameters for the task "core.type_system.custom_objects.add":
+10. Modified file with struct data populated for 'x' and 'y' parameters for the task "core.type_system.custom_objects.add":
 
 ::
 
@@ -152,7 +172,7 @@ The generated file would look similar to this. Here, empty values have been dump
   task: core.type_system.custom_objects.add
   version: v3
 
-10. If you have configured a plugin that implements github.com/flyteorg/flyteadmin/pkg/workflowengine/interfaces/WorkflowExecutor 
+11. If you have configured a plugin that implements github.com/flyteorg/flyteadmin/pkg/workflowengine/interfaces/WorkflowExecutor 
    that supports cluster pools, then when creating a new execution, you can assign it to a specific cluster pool:
 
 ::
@@ -166,17 +186,18 @@ The generated file would look similar to this. Here, empty values have been dump
 // ExecutionConfig hold configuration for create execution flags and configuration of the actual task or workflow  to be launched.
 type ExecutionConfig struct {
 	// pflag section
-	ExecFile        string `json:"execFile,omitempty" pflag:",file for the execution params. If not specified defaults to <<workflow/task>_name>.execution_spec.yaml"`
-	TargetDomain    string `json:"targetDomain" pflag:",project where execution needs to be created. If not specified configured domain would be used."`
-	TargetProject   string `json:"targetProject" pflag:",project where execution needs to be created. If not specified configured project would be used."`
-	KubeServiceAcct string `json:"kubeServiceAcct" pflag:",kubernetes service account AuthRole for launching execution."`
-	IamRoleARN      string `json:"iamRoleARN" pflag:",iam role ARN AuthRole for launching execution."`
-	Relaunch        string `json:"relaunch" pflag:",execution id to be relaunched."`
-	Recover         string `json:"recover" pflag:",execution id to be recreated from the last known failure point."`
-	DryRun          bool   `json:"dryRun" pflag:",execute command without making any modifications."`
-	Version         string `json:"version" pflag:",specify version of execution workflow/task."`
-	ClusterPool     string `json:"clusterPool" pflag:",specify which cluster pool to assign execution to."`
-	OverwriteCache  bool   `json:"overwriteCache" pflag:",skip cached results when performing execution,causing all outputs to be re-calculated and stored data to be overwritten. Does not work for recovered executions."`
+	ExecFile               string `json:"execFile,omitempty" pflag:",file for the execution params. If not specified defaults to <<workflow/task>_name>.execution_spec.yaml"`
+	TargetDomain           string `json:"targetDomain" pflag:",domain where execution needs to be created. If not specified configured domain would be used."`
+	TargetProject          string `json:"targetProject" pflag:",project where execution needs to be created. If not specified configured project would be used."`
+	TargetExecutionCluster string `json:"targetExecutionCluster" pflag:",cluster where execution needs to be created. If not specific the default would be used."`
+	KubeServiceAcct        string `json:"kubeServiceAcct" pflag:",kubernetes service account AuthRole for launching execution."`
+	IamRoleARN             string `json:"iamRoleARN" pflag:",iam role ARN AuthRole for launching execution."`
+	Relaunch               string `json:"relaunch" pflag:",execution id to be relaunched."`
+	Recover                string `json:"recover" pflag:",execution id to be recreated from the last known failure point."`
+	DryRun                 bool   `json:"dryRun" pflag:",execute command without making any modifications."`
+	Version                string `json:"version" pflag:",specify version of execution workflow/task."`
+	ClusterPool            string `json:"clusterPool" pflag:",specify which cluster pool to assign execution to."`
+	OverwriteCache         bool   `json:"overwriteCache" pflag:",skip cached results when performing execution,causing all outputs to be re-calculated and stored data to be overwritten. Does not work for recovered executions."`
 	// Non plfag section is read from the execution config generated by get task/launch plan
 	Workflow string                 `json:"workflow,omitempty"`
 	Task     string                 `json:"task,omitempty"`

flytectl/cmd/create/execution_util.go

@@ -54,7 +54,7 @@ func createExecutionRequestForWorkflow(ctx context.Context, workflowName, projec
 		}
 	}
 
-	return createExecutionRequest(lp.Id, inputs, envs, securityContext, authRole, targetExecName), nil
+	return createExecutionRequest(lp.Id, inputs, envs, securityContext, authRole, targetExecName, executionConfig.TargetExecutionCluster), nil
 }
 
 func createExecutionRequestForTask(ctx context.Context, taskName string, project string, domain string,
@@ -102,7 +102,7 @@ func createExecutionRequestForTask(ctx context.Context, taskName string, project
 		Version:      task.Id.Version,
 	}
 
-	return createExecutionRequest(id, inputs, envs, securityContext, authRole, targetExecName), nil
+	return createExecutionRequest(id, inputs, envs, securityContext, authRole, targetExecName, executionConfig.TargetExecutionCluster), nil
 }
 
 func relaunchExecution(ctx context.Context, executionName string, project string, domain string,
@@ -148,7 +148,7 @@ func recoverExecution(ctx context.Context, executionName string, project string,
 	return nil
 }
 
-func createExecutionRequest(ID *core.Identifier, inputs *core.LiteralMap, envs *admin.Envs, securityContext *core.SecurityContext, authRole *admin.AuthRole, targetExecName string) *admin.ExecutionCreateRequest {
+func createExecutionRequest(ID *core.Identifier, inputs *core.LiteralMap, envs *admin.Envs, securityContext *core.SecurityContext, authRole *admin.AuthRole, targetExecName string, targetExecutionCluster string) *admin.ExecutionCreateRequest {
 
 	if len(targetExecName) == 0 {
 		targetExecName = "f" + strings.ReplaceAll(uuid.New().String(), "-", "")[:19]
@@ -157,6 +157,10 @@ func createExecutionRequest(ID *core.Identifier, inputs *core.LiteralMap, envs *
 	if executionConfig.ClusterPool != "" {
 		clusterAssignment = &admin.ClusterAssignment{ClusterPoolName: executionConfig.ClusterPool}
 	}
+	var executionClusterLabel *admin.ExecutionClusterLabel
+	if targetExecutionCluster != "" {
+		executionClusterLabel = &admin.ExecutionClusterLabel{Value: targetExecutionCluster}
+	}
 	return &admin.ExecutionCreateRequest{
 		Project: executionConfig.TargetProject,
 		Domain:  executionConfig.TargetDomain,
@@ -168,11 +172,12 @@ func createExecutionRequest(ID *core.Identifier, inputs *core.LiteralMap, envs *
 				Principal: "sdk",
 				Nesting:   0,
 			},
-			AuthRole:          authRole,
-			SecurityContext:   securityContext,
-			ClusterAssignment: clusterAssignment,
-			OverwriteCache:    executionConfig.OverwriteCache,
-			Envs:              envs,
+			AuthRole:              authRole,
+			SecurityContext:       securityContext,
+			ClusterAssignment:     clusterAssignment,
+			OverwriteCache:        executionConfig.OverwriteCache,
+			Envs:                  envs,
+			ExecutionClusterLabel: executionClusterLabel,
 		},
 		Inputs: inputs,
 	}

flytectl/cmd/create/execution_util_test.go

@@ -129,6 +129,22 @@ func TestCreateExecutionRequestForWorkflow(t *testing.T) {
 		assert.Nil(t, err)
 		assert.NotNil(t, execCreateRequest)
 	})
+	t.Run("successful with execution Cluster label and envs", func(t *testing.T) {
+		s := setup()
+		defer s.TearDown()
+
+		createExecutionUtilSetup()
+		launchPlan := &admin.LaunchPlan{}
+		s.FetcherExt.OnFetchLPVersionMatch(s.Ctx, mock.Anything, mock.Anything, mock.Anything, mock.Anything).Return(launchPlan, nil)
+		var executionConfigWithEnvs = &ExecutionConfig{
+			Envs:                   map[string]string{},
+			TargetExecutionCluster: "cluster",
+		}
+		execCreateRequest, err := createExecutionRequestForWorkflow(s.Ctx, "wfName", config.GetConfig().Project, config.GetConfig().Domain, s.CmdCtx, executionConfigWithEnvs, "")
+		assert.Nil(t, err)
+		assert.NotNil(t, execCreateRequest)
+		assert.Equal(t, "cluster", execCreateRequest.Spec.ExecutionClusterLabel.Value)
+	})
 	t.Run("failed literal conversion", func(t *testing.T) {
 		s := setup()
 		defer s.TearDown()

flytectl/cmd/get/execution_test.go

@@ -176,7 +176,7 @@ func TestGetExecutionFuncWithIOData(t *testing.T) {
 		nodeExecList := &admin.NodeExecutionList{NodeExecutions: nodeExecutions}
 
 		inputs := map[string]*core.Literal{
-			"val1": &core.Literal{
+			"val1": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{
@@ -191,7 +191,7 @@ func TestGetExecutionFuncWithIOData(t *testing.T) {
 			},
 		}
 		outputs := map[string]*core.Literal{
-			"o2": &core.Literal{
+			"o2": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{
@@ -288,7 +288,7 @@ func TestGetExecutionFuncWithIOData(t *testing.T) {
 			nodeExecutions := []*admin.NodeExecution{nodeExec1}
 			nodeExecList := &admin.NodeExecutionList{NodeExecutions: nodeExecutions}
 			inputs := map[string]*core.Literal{
-				"val1": &core.Literal{
+				"val1": {
 					Value: &core.Literal_Scalar{
 						Scalar: &core.Scalar{
 							Value: &core.Scalar_Primitive{
@@ -303,7 +303,7 @@ func TestGetExecutionFuncWithIOData(t *testing.T) {
 				},
 			}
 			outputs := map[string]*core.Literal{
-				"o2": &core.Literal{
+				"o2": {
 					Value: &core.Literal_Scalar{
 						Scalar: &core.Scalar{
 							Value: &core.Scalar_Primitive{

flytectl/cmd/get/node_execution_test.go

@@ -177,7 +177,7 @@ func TestGetExecutionDetails(t *testing.T) {
 		nodeExecList := &admin.NodeExecutionList{NodeExecutions: nodeExecutions}
 
 		inputs := map[string]*core.Literal{
-			"val1": &core.Literal{
+			"val1": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{
@@ -192,7 +192,7 @@ func TestGetExecutionDetails(t *testing.T) {
 			},
 		}
 		outputs := map[string]*core.Literal{
-			"o2": &core.Literal{
+			"o2": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{
@@ -243,7 +243,7 @@ func TestGetExecutionDetails(t *testing.T) {
 		nodeExecList := &admin.NodeExecutionList{NodeExecutions: nodeExecutions}
 
 		inputs := map[string]*core.Literal{
-			"val1": &core.Literal{
+			"val1": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{
@@ -258,7 +258,7 @@ func TestGetExecutionDetails(t *testing.T) {
 			},
 		}
 		outputs := map[string]*core.Literal{
-			"o2": &core.Literal{
+			"o2": {
 				Value: &core.Literal_Scalar{
 					Scalar: &core.Scalar{
 						Value: &core.Scalar_Primitive{