The Open Network: Full node and Toncenter API, dockerised

This repository contains TON full node and Toncenter API builds unified into one Compose definition - to run as a service on any host machine.

This setup can be deployed on your host without any external dependencies: just clone this repo and run bootstrap.sh. Then wait for your full node to sync with the chain.

Credentials

Many thanks to EmelyanenkoK and neodiX42 for the TON node build which is used here without major changes, as well as dungeon-master-666 for TON HTTP API.

This setup has been created with the use of these sources.

Functionality

TON node works in the full mode by default.

The API service can be configured to work in two modes:

• one-to-one (onetoone) - interacting with your node only;
• one-to-many (onetomany) - interacting with a set of nodes including your node.

Prerequisites

To bootstrap and run the node, you have to install Docker and Docker Compose on your host.

For node system requirements, refer to the official requirements.

For MacOS, install gnu-sed to run the bootstrap script adequately:

brew install gnu-sed

Then, use gsed instead of sed in bootstrap.sh.

Configuration

NB: The TON_NODE_IP environment variable is fetched via an external resource. In case you need anything different, just remove the export TON_NODE_IP definition from bootstrap.sh and set TON_NODE_IP manually instead.

Both node and API are configured via the .env file.

In the node part of the file, you will find following parameters:

Variable	Description	Default value
NODE_VERSION	Release version of the TON node - consider specifying the latest version	2023.12
NODE_CONF_VOLUME	External volume to store node configuration files	${PWD}/config/node-config
NODE_LOG_VOLUME	External volume to store node logs	${PWD}/logs
NODE_STATE_VOLUME	External volume to store the node DB	${PWD}/db
NODE_CONFIG_URL	Node config URL to download (find current config versions for Testnet and Mainnet below)	Testnet config
NODE_PUBLIC_IP	External public IP of your host to advertise the node on. This IP can be fetched automatically by bootstrap.sh	TON_NODE_IP environment variable
NODE_LITESERVER	Enable liteserver mode	true
NODE_LITESERVER_PORT	Node liteserver port	43679
NODE_CONSOLE_PORT	Node control plane port	43678

In the API part of the file, you can set following HTTP API parameters:

Variable	Description	Default value
API_VERSION	Release version of TON HTTP API	2.0.31
API_NETWORK	API network corresponding with your node	testnet
API_MODE	API interaction mode as above: onetoone or onetomany	onetoone
API_CONF_VOLUME	External volume to store API configs	${PWD}/config/api-config
API_CACHE_ENABLED	Set 1 to enable API cache	0
API_LOGS_JSONIFY	Set 1 to get logs in the JSON format	0
API_LOGS_LEVEL	API log level	ERROR
API_TONLIB_LITESERVER_CONFIG	Internal config path, fetched automatically from API_NETWORK and API_MODE variables	/conf/${API_NETWORK}-config-${API_MODE}.json
API_TONLIB_PARALLEL_REQUESTS_PER_LITESERVER	Maximal number of parallel request per liteserver	50
API_TONLIB_REQUEST_TIMEOUT	Timeout time of a request in milliseconds	10000
API_GET_METHODS_ENABLED	Set 1 to enable GET API methods	1
API_JSON_RPC_ENABLED	Set 1 to enable JSON RPC	1
API_ROOT_PATH	API root path after your hostname or IP	"/"

Running the node

To run the full node and API, change environment variables needed in the .env configuration and run the bootstrap.sh script.

This script will perform following operations:

1. Set your static IP as the TON_NODE_IP environment variable - to be used in the .env file further.
2. Apply .env variables to your shell environment.
3. Build local node and API images.
4. Run the node container. The node will bootstrap additionally with the use of the ./config/node-config/init.sh script.
5. Run the standard python Docker image to set the NODE_API_KEY variable containing the generated HTTP API key of the node.
6. Add the obtained node API key to the desired API config.
7. Run the HTTP API container.

Then, just wait until your node is synchronised with the chain.

To interact with the API, refer to the Toncenter API reference.

Updating the node

Just lift the release version in the NODE_VERSION variable of the .env file.

Troubleshooting

1. Failed to parse config

ton-node logs:

[ 1][t 1][2023-12-24 23:20:03.489683013][validator-engine.cpp:3517][!validator-engine]	failed to parse config: [Error : 0 : failed to parse json: Unexpected symbol while parsing JSON Object]

If you see this error, check the downloaded and initialised config.json for syntax glitches. Change the file itself or the init.sh script accordingly. After this, you can either restart the node via Compose or bootstrap it again: in case you changed init.sh, remove the existing config and allow to reinitialise it via the script.

2. No nodes in the network

ton-node logs:

[ 2][t 6][2023-12-24 23:56:21.137193799][manager-init.cpp:86][!downloadproofreq]	failed to download proof link: [Error : 651 : no nodes]

This warning always appears during initial node start. Just wait until the node starts to sync.

3. Dead workers in onetomany mode

ton-api logs:

2023-12-25 10:49:47.910 | ERROR    | pyTON.manager:check_children_alive:232 - TonlibWorker #XXX is dead!!! Exit code: 12
2023-12-25 10:49:57.968 | ERROR    | pyTON.worker:report_last_block:118 - TonlibWorker #000 report_last_block exception of type LiteServerTimeout: LITE_SERVER_NETWORKadnl query timeout

If you see that some of workers other than 000 (your node) are dead - this means, these nodes are not accessible. This situation is not critical, so far there are accessible workers in the list including your node. Still, consider updating API configs from time to time.

Checked on...

This setup works correctly with following software:

• Docker Compose v2.15.1
• Docker v20.10.23, build 7155243
• MacOS Sonoma 14.0 (Apple M1)