Error messages

[RBL-Hormann-ALK]

I receive the error messages below when I use a nanocul usb stick in Domoticz. There are several devices discovered and works as expected but was hoping the error messages can be eliminated.

2023-11-11 19:06:33.218 Error: Evohome USB: evohome: unknown command 12c8
2023-11-11 19:06:56.216 Error: Evohome USB: evohome: unknown command 1298
2023-11-11 19:07:13.475 Error: Evohome USB: evohome: unknown command 31da
2023-11-11 19:08:13.561 Error: Evohome USB: evohome: invalid message structure - possible corrupt message
2023-11-11 19:08:35.352 Error: Evohome USB: evohome: unknown command 1298
2023-11-11 19:08:36.922 Error: Evohome USB: evohome: unknown command 1fd4
2023-11-11 19:08:41.773 Error: Evohome USB: evohome: unknown command 2e10
2023-11-11 19:09:29.766 Error: Evohome USB: evohome: unknown command 31e0
2023-11-11 19:09:37.971 Error: Evohome USB: evohome: unknown command 2e10
2023-11-11 19:09:42.831 Error: Evohome USB: evohome: unknown command 31d9
2023-11-11 19:10:06.858 Error: Evohome USB: evohome: unknown command 31e0
2023-11-11 19:10:19.075 Error: Evohome

[ghoti57]

This is an issue to take up with the Domoticz team.

Evofw3 just captures the radio messages and reports then to a host. It does not generate visible error messages.

[RBL-Hormann-ALK]

Ok that's clear, thanks. I already tried to find the person that made the Evohome code in Domoticz because nobody responds to my questions. (And yes I know in HA it works better.. )

[RBL-Hormann-ALK]

I hope you been help me with the following. In Domoticz I also have several devices that display zone information like the below example.

Heating | Relay | Set Level: 62 %: 124

What is the 124 and is the 62% the demand or something?

[ghoti57]

I'm sorry I have no experience with Domoticz ⁣Get BlueMail for Android ​

…

On 12 Nov 2023, 22:31, at 22:31, Robert Blom ***@***.***> wrote: I hope you been help me with the following. In Domoticz I also have several devices that display zone information like the below example. Heating | Relay | Set Level: 62 %: 124 What is the 124 and is the 62% the demand or something? -- Reply to this email directly or view it on GitHub: #42 (comment) You are receiving this because you modified the open/close state. Message ID: ***@***.***>