Merge tag 'v4.11' into capsicum

Linux 4.11

Conflicts:
	Makefile

Documentation/devicetree/bindings/pci/hisilicon-pcie.txt

@@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
 	};
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM
+compliant for all devices other than the root complex. In such cases,
+the host controller should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+		   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
 		   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@ host-generic-pci.txt:
 
 Example:
 	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,pcie-almost-ecam";
+		compatible = "hisilicon,hip06-pcie-ecam";
 		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
 		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
 		bus-range = <0  31>;

MAINTAINERS

@@ -2585,12 +2585,26 @@ F:	include/uapi/linux/if_bonding.h
 
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
 L:	netdev@vger.kernel.org
 L:	linux-kernel@vger.kernel.org
 S:	Supported
+F:	arch/x86/net/bpf_jit*
+F:	Documentation/networking/filter.txt
+F:	include/linux/bpf*
+F:	include/linux/filter.h
+F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
-F:	tools/testing/selftests/bpf/
+F:	kernel/trace/bpf_trace.c
 F:	lib/test_bpf.c
+F:	net/bpf/
+F:	net/core/filter.c
+F:	net/sched/act_bpf.c
+F:	net/sched/cls_bpf.c
+F:	samples/bpf/
+F:	tools/net/bpf*
+F:	tools/testing/selftests/bpf/
 
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
@@ -8769,6 +8783,7 @@ W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+B:	mailto:netdev@vger.kernel.org
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -12472,7 +12487,6 @@ F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
 TI ETHERNET SWITCH DRIVER (CPSW)
-M:	Mugunthan V N <mugunthanvnm@ti.com>
 R:	Grygorii Strashko <grygorii.strashko@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc7-capsicum
+EXTRAVERSION = -capsicum
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -406,6 +406,14 @@ config ARC_HAS_DIV_REM
 	bool "Insn: div, divu, rem, remu"
 	default y
 
+config ARC_HAS_ACCL_REGS
+	bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)"
+	default n
+	help
+	  Depending on the configuration, CPU can contain accumulator reg-pair
+	  (also referred to as r58:r59). These can also be used by gcc as GPR so
+	  kernel needs to save/restore per process
+
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"

arch/arc/include/asm/atomic.h

@@ -17,10 +17,11 @@
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
+#define ATOMIC_INIT(i)	{ (i) }
+
 #ifndef CONFIG_ARC_PLAT_EZNPS
 
 #define atomic_read(v)  READ_ONCE((v)->counter)
-#define ATOMIC_INIT(i)	{ (i) }
 
 #ifdef CONFIG_ARC_HAS_LLSC
 

arch/arc/include/asm/entry-arcv2.h

@@ -16,6 +16,11 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	PUSH	r59
+	PUSH	r58
+#endif
+
 	PUSH	r30
 	PUSH	r12
 
@@ -75,6 +80,11 @@
 	POP	r12
 	POP	r30
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	POP	r58
+	POP	r59
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/

arch/arc/include/asm/ptrace.h

@@ -86,6 +86,10 @@ struct pt_regs {
 
 	unsigned long r12, r30;
 
+#ifdef CONFIG_ARC_HAS_ACCL_REGS
+	unsigned long r58, r59;	/* ACCL/ACCH used by FPU / DSP MPY */
+#endif
+
 	/*------- Below list auto saved by h/w -----------*/
 	unsigned long r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, r10, r11;
 

arch/arc/kernel/setup.c

@@ -319,7 +319,8 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 static void arc_chk_core_config(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
-	int fpu_enabled;
+	int saved = 0, present = 0;
+	char *opt_nm = NULL;;
 
 	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
@@ -346,17 +347,28 @@ static void arc_chk_core_config(void)
 
 	/*
 	 * FP hardware/software config sanity
-	 * -If hardware contains DPFP, kernel needs to save/restore FPU state
+	 * -If hardware present, kernel needs to save/restore FPU state
 	 * -If not, it will crash trying to save/restore the non-existant regs
-	 *
-	 * (only DPDP checked since SP has no arch visible regs)
 	 */
-	fpu_enabled = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
 
-	if (cpu->extn.fpu_dp && !fpu_enabled)
-		pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
-	else if (!cpu->extn.fpu_dp && fpu_enabled)
-		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
+	if (is_isa_arcompact()) {
+		opt_nm = "CONFIG_ARC_FPU_SAVE_RESTORE";
+		saved = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
+
+		/* only DPDP checked since SP has no arch visible regs */
+		present = cpu->extn.fpu_dp;
+	} else {
+		opt_nm = "CONFIG_ARC_HAS_ACCL_REGS";
+		saved = IS_ENABLED(CONFIG_ARC_HAS_ACCL_REGS);
+
+		/* Accumulator Low:High pair (r58:59) present if DSP MPY or FPU */
+		present = cpu->extn_mpy.dsp | cpu->extn.fpu_sp | cpu->extn.fpu_dp;
+	}
+
+	if (present && !saved)
+		pr_warn("Enable %s for working apps\n", opt_nm);
+	else if (!present && saved)
+		panic("Disable %s, hardware NOT present\n", opt_nm);
 }
 
 /*

arch/mips/Makefile

@@ -489,7 +489,7 @@ $(generic_defconfigs):
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
 		-m -O $(objtree) $(srctree)/arch/$(ARCH)/configs/generic_defconfig $^ \
 		$(foreach board,$(BOARDS),$(generic_config_dir)/board-$(board).config)
-	$(Q)$(MAKE) olddefconfig
+	$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
 
 #
 # Prevent generic merge_config rules attempting to merge single fragments
@@ -503,8 +503,8 @@ $(generic_config_dir)/%.config: ;
 #
 .PHONY: sead3_defconfig
 sead3_defconfig:
-	$(Q)$(MAKE) 32r2el_defconfig BOARDS=sead-3
+	$(Q)$(MAKE) -f $(srctree)/Makefile 32r2el_defconfig BOARDS=sead-3
 
 .PHONY: sead3micro_defconfig
 sead3micro_defconfig:
-	$(Q)$(MAKE) micro32r2el_defconfig BOARDS=sead-3
+	$(Q)$(MAKE) -f $(srctree)/Makefile micro32r2el_defconfig BOARDS=sead-3

arch/mips/include/asm/asm-prototypes.h

@@ -3,3 +3,4 @@
 #include <asm/fpu.h>
 #include <asm-generic/asm-prototypes.h>
 #include <asm/uaccess.h>
+#include <asm/ftrace.h>

arch/mips/kernel/cevt-r4k.c

@@ -80,7 +80,7 @@ static unsigned int calculate_min_delta(void)
 		}
 
 		/* Sorted insert of 75th percentile into buf2 */
-		for (k = 0; k < i; ++k) {
+		for (k = 0; k < i && k < ARRAY_SIZE(buf2); ++k) {
 			if (buf1[ARRAY_SIZE(buf1) - 1] < buf2[k]) {
 				l = min_t(unsigned int,
 					  i, ARRAY_SIZE(buf2) - 1);

arch/mips/kernel/elf.c

@@ -257,7 +257,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr,
 	else if ((prog_req.fr1 && prog_req.frdefault) ||
 		 (prog_req.single && !prog_req.frdefault))
 		/* Make sure 64-bit MIPS III/IV/64R1 will not pick FR1 */
-		state->overall_fp_mode = ((current_cpu_data.fpu_id & MIPS_FPIR_F64) &&
+		state->overall_fp_mode = ((raw_current_cpu_data.fpu_id & MIPS_FPIR_F64) &&
 					  cpu_has_mips_r2_r6) ?
 					  FP_FR1 : FP_FR0;
 	else if (prog_req.fr1)

arch/mips/kernel/kgdb.c

@@ -244,35 +244,53 @@ static int compute_signal(int tt)
 void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
 {
 	int reg;
-	struct thread_info *ti = task_thread_info(p);
-	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
-	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
 #if (KGDB_GDB_REG_SIZE == 32)
 	u32 *ptr = (u32 *)gdb_regs;
 #else
 	u64 *ptr = (u64 *)gdb_regs;
 #endif
 
 	for (reg = 0; reg < 16; reg++)
-		*(ptr++) = regs->regs[reg];
+		*(ptr++) = 0;
 
 	/* S0 - S7 */
-	for (reg = 16; reg < 24; reg++)
-		*(ptr++) = regs->regs[reg];
+	*(ptr++) = p->thread.reg16;
+	*(ptr++) = p->thread.reg17;
+	*(ptr++) = p->thread.reg18;
+	*(ptr++) = p->thread.reg19;
+	*(ptr++) = p->thread.reg20;
+	*(ptr++) = p->thread.reg21;
+	*(ptr++) = p->thread.reg22;
+	*(ptr++) = p->thread.reg23;
 
 	for (reg = 24; reg < 28; reg++)
 		*(ptr++) = 0;
 
 	/* GP, SP, FP, RA */
-	for (reg = 28; reg < 32; reg++)
-		*(ptr++) = regs->regs[reg];
-
-	*(ptr++) = regs->cp0_status;
-	*(ptr++) = regs->lo;
-	*(ptr++) = regs->hi;
-	*(ptr++) = regs->cp0_badvaddr;
-	*(ptr++) = regs->cp0_cause;
-	*(ptr++) = regs->cp0_epc;
+	*(ptr++) = (long)p;
+	*(ptr++) = p->thread.reg29;
+	*(ptr++) = p->thread.reg30;
+	*(ptr++) = p->thread.reg31;
+
+	*(ptr++) = p->thread.cp0_status;
+
+	/* lo, hi */
+	*(ptr++) = 0;
+	*(ptr++) = 0;
+
+	/*
+	 * BadVAddr, Cause
+	 * Ideally these would come from the last exception frame up the stack
+	 * but that requires unwinding, otherwise we can't know much for sure.
+	 */
+	*(ptr++) = 0;
+	*(ptr++) = 0;
+
+	/*
+	 * PC
+	 * use return address (RA), i.e. the moment after return from resume()
+	 */
+	*(ptr++) = p->thread.reg31;
 }
 
 void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long pc)

arch/mips/kernel/perf_event_mipsxx.c

@@ -1446,6 +1446,11 @@ static int mipsxx_pmu_handle_shared_irq(void)
 	HANDLE_COUNTER(0)
 	}
 
+#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
+	read_unlock(&pmuint_rwlock);
+#endif
+	resume_local_counters();
+
 	/*
 	 * Do all the work for the pending perf events. We can do this
 	 * in here because the performance counter interrupt is a regular
@@ -1454,10 +1459,6 @@ static int mipsxx_pmu_handle_shared_irq(void)
 	if (handled == IRQ_HANDLED)
 		irq_work_run();
 
-#ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS
-	read_unlock(&pmuint_rwlock);
-#endif
-	resume_local_counters();
 	return handled;
 }
 

arch/mips/kernel/relocate.c

@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/libfdt.h>
 #include <linux/of_fdt.h>
-#include <linux/sched.h>
+#include <linux/sched/task.h>
 #include <linux/start_kernel.h>
 #include <linux/string.h>
 #include <linux/printk.h>

arch/mips/kernel/smp-cps.c

@@ -422,13 +422,12 @@ void play_dead(void)
 	local_irq_disable();
 	idle_task_exit();
 	cpu = smp_processor_id();
+	core = cpu_data[cpu].core;
 	cpu_death = CPU_DEATH_POWER;
 
 	pr_debug("CPU%d going offline\n", cpu);
 
 	if (cpu_has_mipsmt || cpu_has_vp) {
-		core = cpu_data[cpu].core;
-
 		/* Look for another online VPE within the core */
 		for_each_online_cpu(cpu_death_sibling) {
 			if (cpu_data[cpu_death_sibling].core != core)

arch/mips/mti-malta/malta-int.c

@@ -232,6 +232,17 @@ void __init arch_init_irq(void)
 {
 	int corehi_irq;
 
+	/*
+	 * Preallocate the i8259's expected virq's here. Since irqchip_init()
+	 * will probe the irqchips in hierarchial order, i8259 is probed last.
+	 * If anything allocates a virq before the i8259 is probed, it will
+	 * be given one of the i8259's expected range and consequently setup
+	 * of the i8259 will fail.
+	 */
+	WARN(irq_alloc_descs(I8259A_IRQ_BASE, I8259A_IRQ_BASE,
+			    16, numa_node_id()) < 0,
+		"Cannot reserve i8259 virqs at IRQ%d\n", I8259A_IRQ_BASE);
+
 	i8259_set_poll(mips_pcibios_iack);
 	irqchip_init();
 

arch/mips/pci/pci-legacy.c

@@ -190,7 +190,7 @@ void register_pci_controller(struct pci_controller *hose)
 	}
 
 	INIT_LIST_HEAD(&hose->list);
-	list_add(&hose->list, &controllers);
+	list_add_tail(&hose->list, &controllers);
 
 	/*
 	 * Do not panic here but later - this might happen before console init.