Use ghcr where possible

_config.yml

@@ -175,6 +175,10 @@ toc:
 
 # Configuration for installation pages
 installation:
+  container:
+    base: "ghcr.io/home-assistant/home-assistant"
+    raspberrypi3: "ghcr.io/home-assistant/raspberrypi3-homeassistant"
+    raspberrypi4: "ghcr.io/home-assistant/raspberrypi4-homeassistant"
   versions:
     python: "3.8"
   types:

source/_includes/common-tasks/beta_version.md

@@ -41,7 +41,7 @@ If you would like to test next release before anyone else, you can install the b
 {% elsif page.installation == "container" %}
 
 ```bash
-docker pull homeassistant/home-assistant:beta
+docker pull {{ site.installation.container.base }}:beta
 ```
 
 **[You then need to recreate the container with the new image.](/installation/linux#install-home-assistant-container)**

source/_includes/common-tasks/development_version.md

@@ -31,7 +31,7 @@ If you want to stay on the bleeding-edge Home Assistant Core development branch,
 {% elsif page.installation == "container" %}
 
 ```bash
-docker pull homeassistant/home-assistant:dev
+docker pull {{ site.installation.container.base }}:dev
 ```
 
 **[You then need to recreate the container with the new image.](/installation/linux#install-home-assistant-container)**

source/_includes/common-tasks/specific_version.md

@@ -13,7 +13,7 @@ ha core update --version {{current_version}}
 {% elsif page.installation == "container" %}
 
 ```bash
-docker pull homeassistant/home-assistant:{{current_version}}
+docker pull {{ site.installation.container.base }}:{{current_version}}
 ```
 
 **[You then need to recreate the container with the new image.](/installation/linux#install-home-assistant-container)**

source/_includes/common-tasks/update.md

@@ -44,13 +44,13 @@ To update Home Assistant Core when you run Home Assistant {{ page.installation_n
     **First start with pulling the new container.**
 
     ```bash
-    docker pull homeassistant/home-assistant:stable
+    docker pull {{ site.installation.container.base }}:stable
     ```
 
     You can also use specific containers for your hardware. Like Raspberry Pi 4:
 
     ```bash
-    docker pull homeassistant/raspberrypi4-homeassistant:stable
+    docker pull {{ site.installation.container.raspberrypi4 }}:stable
     ```
 
     **[You then need to recreate the container with the new image.](/installation/linux#install-home-assistant-container)**

source/_includes/installation/container.md

@@ -17,17 +17,17 @@ Installation with Docker is straightforward. Adjust the following command so tha
 {% if page.installation_type == 'raspberrypi' %}
 #### Raspberry pi 3
 
-  {% include installation/container/cli.md image="homeassistant/raspberrypi3-homeassistant:stable" %}
+  {% include installation/container/cli.md image=site.installation.container.raspberrypi3 %}
 
 #### Raspberry pi 4
 
-  {% include installation/container/cli.md image="homeassistant/raspberrypi4-homeassistant:stable" %}
+  {% include installation/container/cli.md image=site.installation.container.raspberrypi4 %}
 
 {% elsif page.installation_type == 'alternative' %}
   {% include installation/container/alternative.md %}
 
 {% else %}
-  {% include installation/container/cli.md image="homeassistant/home-assistant:stable" %}
+  {% include installation/container/cli.md %}
 {% endif %}
 
 Once the Home Assistant Container is running Home Assistant should be accessible using `http://<host>:8123` (replace <host> with the hostname or IP of the system). You can continue with onboarding.
@@ -67,13 +67,13 @@ As the Docker command becomes more complex, switching to `docker-compose` can be
 {% if page.installation_type == 'raspberrypi' %}
 #### Raspberry pi 3
 
-  {% include installation/container/compose.md image="homeassistant/raspberrypi3-homeassistant:stable" %}
+  {% include installation/container/compose.md image=site.installation.container.raspberrypi3 %}
 
 #### Raspberry pi 4
 
-  {% include installation/container/compose.md image="homeassistant/raspberrypi4-homeassistant:stable" %}
+  {% include installation/container/compose.md image=site.installation.container.raspberrypi4 %}
 {% else %}
-  {% include installation/container/compose.md image="homeassistant/home-assistant:stable" %}
+  {% include installation/container/compose.md %}
 {% endif %}
 
 Start it by running:

source/_includes/installation/container/alternative.md

@@ -42,7 +42,7 @@ Adjust the following Terminal command as follows :
 Run it in Terminal.  
 
 ```bash
-sudo docker run --restart always -d --name homeassistant -v /PATH_TO_YOUR_CONFIG:/config --device=/PATH_TO_YOUR_USB_STICK -e TZ=Australia/Melbourne --net=host homeassistant/home-assistant:stable
+sudo docker run --restart always -d --name homeassistant -v /PATH_TO_YOUR_CONFIG:/config --device=/PATH_TO_YOUR_USB_STICK -e TZ=Australia/Melbourne --net=host {{ site.installation.container.base }}:stable
 ```
 
 Complete the remainder of the Z-Wave configuration by [following the instructions here.](/docs/z-wave/installation)
@@ -104,7 +104,7 @@ If you want to use a USB Bluetooth adapter or Z-Wave USB stick with Home Assista
 - Run Docker command:
 
   ```bash
-  docker run --init --name homeassistant --net=host --privileged -itd -v /share/CACHEDEV1_DATA/Public/homeassistant/config:/config -e TZ=Europe/London --device /dev/ttyACM0 homeassistant/home-assistant:stable
+  docker run --init --name homeassistant --net=host --privileged -itd -v /share/CACHEDEV1_DATA/Public/homeassistant/config:/config -e TZ=Europe/London --device /dev/ttyACM0 {{ site.installation.container.base }}:stable
   ```
 
   `-v` is your configuration path
@@ -125,7 +125,7 @@ That will tell Home Assistant where to look for our Z-Wave radio.
 - Run Docker command:
 
   ```bash
-  docker run --init --name homeassistant --net=host --privileged -itd -v /share/CACHEDEV1_DATA/Public/homeassistant/config:/config -e TZ=Europe/London -v /dev/bus/usb:/dev/bus/usb -v /var/run/dbus:/var/run/dbus homeassistant/home-assistant:stable
+  docker run --init --name homeassistant --net=host --privileged -itd -v /share/CACHEDEV1_DATA/Public/homeassistant/config:/config -e TZ=Europe/London -v /dev/bus/usb:/dev/bus/usb -v /var/run/dbus:/var/run/dbus {{ site.installation.container.base }}:stable
   ```
 
   First `-v` is your configuration path

source/_includes/installation/container/cli.md

@@ -10,7 +10,7 @@
       -v /etc/localtime:/etc/localtime:ro \
       -v /PATH_TO_YOUR_CONFIG:/config \
       --network=host \
-      {{ include.image }}
+      {{ include.image | default: site.installation.container.base }}:{{ include.tag | default: 'stable' }}
     ```
 
 - title: Update
@@ -39,7 +39,7 @@
       -v /PATH_TO_YOUR_CONFIG:/config \
       -v /etc/localtime:/etc/localtime:ro \
       --network=host \
-      {{ include.image }}
+      {{ include.image | default: site.installation.container.base }}:{{ include.tag | default: 'stable' }}
     ```
 
 {% endtabbed_block %}

source/_includes/installation/container/compose.md

@@ -3,7 +3,7 @@
   services:
     homeassistant:
       container_name: homeassistant
-      image: {{ include.image }}
+      image: "{{ include.image | default: site.installation.container.base }}:{{ include.tag | default: 'stable' }}"
       volumes:
         - /PATH_TO_YOUR_CONFIG:/config
         - /etc/localtime:/etc/localtime:ro

source/_integrations/dsmr.markdown

@@ -136,7 +136,7 @@ or
 Docker users have to allow Docker access to the device by adding `--device /dev/ttyUSB21:/dev/ttyUSB21` to the run command:
 
 ```hass
-$ docker run --device /dev/ttyUSB0:/dev/ttyUSB0 -d --name="home-assistant" -v /home/USERNAME/hass:/config -v /etc/localtime:/etc/localtime:ro --net=host homeassistant/home-assistant
+$ docker run --device /dev/ttyUSB0:/dev/ttyUSB0 -d --name="home-assistant" -v /home/USERNAME/hass:/config -v /etc/localtime:/etc/localtime:ro --net=host {{ site.installation.container.base }}
 ```
 
 ### Options

source/more-info/local-media/setup-media.markdown

@@ -26,7 +26,7 @@ docker run -d --name="home-assistant" \
   -v /PATH_TO_YOUR_CONFIG:/config \
   -v /etc/localtime:/etc/localtime:ro \
   --net=host \
-  homeassistant/home-assistant:stable
+  {{ site.installation.container.base }}:stable
 ```
 
 You'll need to change it to this:
@@ -37,7 +37,7 @@ docker run -d --name="home-assistant" \
   -v /PATH_TO_YOUR_MEDIA:/media \
   -v /etc/localtime:/etc/localtime:ro \
   --net=host \
-  homeassistant/home-assistant:stable
+  {{ site.installation.container.base }}:stable
 ```
 
 If you are using Docker compose, you can add a volume to your composition file