Skip to content

A reverse engineered server for the proprietary PicoBrew Zymatic protocol

License

Notifications You must be signed in to change notification settings

hotzenklotz/picobrew-server

Repository files navigation

picobrew-server

This project reverse-engineers a server for the proprietary PicoBrew protocol for use with the PicoBrew Zymatic, a homebrewing machine. It is intended to provide an alternative to run the machine without a connection to the official servers at picobrew.com. Run your own server and sync your recipes offline.

HTTP API

The PicoBrew Zymatic's built-in Ardunio uses an unencrypted HTTP communication protocol. All request are GET requests and are not authenticated. The following documentation is based on Firmware 1.1.8.

Installation

  1. Install Python 3.7 or above
  2. In a terminal download, install and run the project:
// Download and install
pip install picobrew_server

// Start the server in production mode on port 80

// Windows 
set FLASK_APP=picobrew_server
flask run --port 80 --host 0.0.0.0

// OSX / Linux
export FLASK_APP=picobrew_server 
flask run --port 80 --host 0.0.0.0
  • Connect the PicoBrew machine to your computer and enable DNS spoofing. Re-route www.picobrew.com to your computer. More Details

Development

  1. Install Python 3.7+ & Poetry:
pip install poetry
  1. Install all dependecies:
poetry install

// Start the server on http://localhost:5000
FLASK_APP=picobrew_server flask run
  1. Lint, Format, and Type Check changes:
pylint picobrew_server
black picobrew_server
mypy picobrew_server

Demo

You can try out the admin UI for uploading your XML files in this online demo. Please note, this website is for showcasing only and you should deploy your own version.

Features

  • Import BeerXML files
  • Send all your recipes to the PicoBrew
  • Send cleaning recipes to the PicoBrew
  • Session Logging
  • Session Recovery
  • Admin Web UI

ToDo

  • Session Charts

Machine Support

  • Picobrew Zymatic

ToDo

  • Picobrew Z Series
  • Picobrew Pico C

Disclaimer

This software is provided "as is" and any expressed or implied warranties are disclaimed. This software submits recipes with temperature targets to your PicoBrew machine and will cause it to heat water. Any damage to your PicoBrew machine is at your own risk.

If the Zymatic faults and the screen goes blank, DON'T leave it powered on. The circulating pump will shut off and the heater stays on. A tube in the glycol loop may rupture.

License

MIT @ Tom Herold

About

A reverse engineered server for the proprietary PicoBrew Zymatic protocol

Resources

License

Stars

Watchers

Forks

Packages

No packages published