Synchronize DiSlord1.0.71 version,

Now you can set the time through the "Expert Setting" menu.
Both the newly sold NanoVNA-H Rev3.6 and NanoVNA-H4 Rev4.3 have installed a 36.768kHz crystal, and the LSE can be used to keep the time correct after shutting down.
Add a 6x11 font version to the 2.8-inch NanoVNA-H to enhance readability as much as possible while maintaining dual-column display. Thanks to DiSlord for providing the new font file.

FatFs/ff.h

@@ -26,7 +26,11 @@
 extern "C" {
 #endif
 
-#include "ffconf.h"		/* FatFs configuration options */
+#if defined(NANOVNA_F303)
+#include "ffconf_303.h"		/* FatFs configuration options for F303 */
+#else
+#include "ffconf_072.h"		/* FatFs configuration options for F072  */
+#endif
 
 #if FF_DEFINED != FFCONF_DEF
 #error Wrong configuration file (ffconf.h).

FatFs/ffconf_303.h

@@ -0,0 +1,329 @@
+/*---------------------------------------------------------------------------/
+/  FatFs Functional Configurations
+/---------------------------------------------------------------------------*/
+
+#define FFCONF_DEF	86631	/* Revision ID */
+
+/*---------------------------------------------------------------------------/
+/ Function Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_READONLY	0
+/* This option switches read-only configuration. (0:Read/Write or 1:Read-only)
+/  Read-only configuration removes writing API functions, f_write(), f_sync(),
+/  f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree()
+/  and optional writing functions as well. */
+
+
+#define FF_FS_MINIMIZE	0
+/* This option defines minimization level to remove some basic API functions.
+/
+/   0: Basic functions are fully enabled.
+/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename()
+/      are removed.
+/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/   3: f_lseek() function is removed in addition to 2. */
+
+
+#define FF_USE_FIND		1
+/* This option switches filtered directory read functions, f_findfirst() and
+/  f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */
+
+
+#define FF_USE_MKFS		0
+/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_FASTSEEK	0
+/* This option switches fast seek function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_EXPAND	0
+/* This option switches f_expand function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_CHMOD	0
+/* This option switches attribute manipulation functions, f_chmod() and f_utime().
+/  (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */
+
+
+#define FF_USE_LABEL	0
+/* This option switches volume label functions, f_getlabel() and f_setlabel().
+/  (0:Disable or 1:Enable) */
+
+
+#define FF_USE_FORWARD	0
+/* This option switches f_forward() function. (0:Disable or 1:Enable) */
+
+
+#define FF_USE_STRFUNC	0
+#define FF_PRINT_LLI	0
+#define FF_PRINT_FLOAT	0
+#define FF_STRF_ENCODE	0
+/* FF_USE_STRFUNC switches string functions, f_gets(), f_putc(), f_puts() and
+/  f_printf().
+/
+/   0: Disable. FF_PRINT_LLI, FF_PRINT_FLOAT and FF_STRF_ENCODE have no effect.
+/   1: Enable without LF-CRLF conversion.
+/   2: Enable with LF-CRLF conversion.
+/
+/  FF_PRINT_LLI = 1 makes f_printf() support long long argument and FF_PRINT_FLOAT = 1/2
+   makes f_printf() support floating point argument. These features want C99 or later.
+/  When FF_LFN_UNICODE >= 1 with LFN enabled, string functions convert the character
+/  encoding in it. FF_STRF_ENCODE selects assumption of character encoding ON THE FILE
+/  to be read/written via those functions.
+/
+/   0: ANSI/OEM in current CP
+/   1: Unicode in UTF-16LE
+/   2: Unicode in UTF-16BE
+/   3: Unicode in UTF-8
+*/
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_CODE_PAGE	866
+/* This option specifies the OEM code page to be used on the target system.
+/  Incorrect code page setting can cause a file open failure.
+/
+/   437 - U.S.
+/   720 - Arabic
+/   737 - Greek
+/   771 - KBL
+/   775 - Baltic
+/   850 - Latin 1
+/   852 - Latin 2
+/   855 - Cyrillic
+/   857 - Turkish
+/   860 - Portuguese
+/   861 - Icelandic
+/   862 - Hebrew
+/   863 - Canadian French
+/   864 - Arabic
+/   865 - Nordic
+/   866 - Russian
+/   869 - Greek 2
+/   932 - Japanese (DBCS)
+/   936 - Simplified Chinese (DBCS)
+/   949 - Korean (DBCS)
+/   950 - Traditional Chinese (DBCS)
+/     0 - Include all code pages above and configured by f_setcp()
+*/
+
+
+#define FF_USE_LFN		1
+#define FF_MAX_LFN		32
+/* The FF_USE_LFN switches the support for LFN (long file name).
+/
+/   0: Disable LFN. FF_MAX_LFN has no effect.
+/   1: Enable LFN with static  working buffer on the BSS. Always NOT thread-safe.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  To enable the LFN, ffunicode.c needs to be added to the project. The LFN function
+/  requiers certain internal working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and
+/  additional (FF_MAX_LFN + 44) / 15 * 32 bytes when exFAT is enabled.
+/  The FF_MAX_LFN defines size of the working buffer in UTF-16 code unit and it can
+/  be in range of 12 to 255. It is recommended to be set it 255 to fully support LFN
+/  specification.
+/  When use stack for the working buffer, take care on stack overflow. When use heap
+/  memory for the working buffer, memory management functions, ff_memalloc() and
+/  ff_memfree() exemplified in ffsystem.c, need to be added to the project. */
+
+
+#define FF_LFN_UNICODE	0
+/* This option switches the character encoding on the API when LFN is enabled.
+/
+/   0: ANSI/OEM in current CP (TCHAR = char)
+/   1: Unicode in UTF-16 (TCHAR = WCHAR)
+/   2: Unicode in UTF-8 (TCHAR = char)
+/   3: Unicode in UTF-32 (TCHAR = DWORD)
+/
+/  Also behavior of string I/O functions will be affected by this option.
+/  When LFN is not enabled, this option has no effect. */
+
+
+#define FF_LFN_BUF		32
+#define FF_SFN_BUF		12
+/* This set of options defines size of file name members in the FILINFO structure
+/  which is used to read out directory items. These values should be suffcient for
+/  the file names to read. The maximum possible length of the read file name depends
+/  on character encoding. When LFN is not enabled, these options have no effect. */
+
+
+#define FF_FS_RPATH		0
+/* This option configures support for relative path.
+/
+/   0: Disable relative path and remove related functions.
+/   1: Enable relative path. f_chdir() and f_chdrive() are available.
+/   2: f_getcwd() function is available in addition to 1.
+*/
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_VOLUMES		1
+/* Number of volumes (logical drives) to be used. (1-10) */
+
+
+#define FF_STR_VOLUME_ID	0
+#define FF_VOLUME_STRS		"RAM","NAND","CF","SD","SD2","USB","USB2","USB3"
+/* FF_STR_VOLUME_ID switches support for volume ID in arbitrary strings.
+/  When FF_STR_VOLUME_ID is set to 1 or 2, arbitrary strings can be used as drive
+/  number in the path name. FF_VOLUME_STRS defines the volume ID strings for each
+/  logical drives. Number of items must not be less than FF_VOLUMES. Valid
+/  characters for the volume ID strings are A-Z, a-z and 0-9, however, they are
+/  compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is
+/  not defined, a user defined volume string table needs to be defined as:
+/
+/  const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",...
+*/
+
+
+#define FF_MULTI_PARTITION	0
+/* This option switches support for multiple volumes on the physical drive.
+/  By default (0), each logical drive number is bound to the same physical drive
+/  number and only an FAT volume found on the physical drive will be mounted.
+/  When this function is enabled (1), each logical drive number can be bound to
+/  arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk()
+/  funciton will be available. */
+
+
+#define FF_MIN_SS		512
+#define FF_MAX_SS		512
+/* This set of options configures the range of sector size to be supported. (512,
+/  1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and
+/  harddisk, but a larger value may be required for on-board flash memory and some
+/  type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured
+/  for variable sector size mode and disk_ioctl() function needs to implement
+/  GET_SECTOR_SIZE command. */
+
+
+#define FF_LBA64		0
+/* This option switches support for 64-bit LBA. (0:Disable or 1:Enable)
+/  To enable the 64-bit LBA, also exFAT needs to be enabled. (FF_FS_EXFAT == 1) */
+
+
+#define FF_MIN_GPT		0x10000000
+/* Minimum number of sectors to switch GPT as partitioning format in f_mkfs and
+/  f_fdisk function. 0x100000000 max. This option has no effect when FF_LBA64 == 0. */
+
+
+#define FF_USE_TRIM		0
+/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable)
+/  To enable Trim function, also CTRL_TRIM command should be implemented to the
+/  disk_ioctl() function. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define FF_FS_TINY		0
+/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny)
+/  At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes.
+/  Instead of private sector buffer eliminated from the file object, common sector
+/  buffer in the filesystem object (FATFS) is used for the file data transfer. */
+
+
+#define FF_FS_EXFAT		1
+/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable)
+/  To enable exFAT, also LFN needs to be enabled. (FF_USE_LFN >= 1)
+/  Note that enabling exFAT discards ANSI C (C89) compatibility. */
+
+
+#define FF_FS_NORTC		0
+#define FF_NORTC_MON	1
+#define FF_NORTC_MDAY	1
+#define FF_NORTC_YEAR	2020
+/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have
+/  any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable
+/  the timestamp function. Every object modified by FatFs will have a fixed timestamp
+/  defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time.
+/  To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be
+/  added to the project to read current time form real-time clock. FF_NORTC_MON,
+/  FF_NORTC_MDAY and FF_NORTC_YEAR have no effect.
+/  These options have no effect in read-only configuration (FF_FS_READONLY = 1). */
+
+
+#define FF_FS_NOFSINFO	0
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this
+/  option, and f_getfree() function at first time after volume mount will force
+/  a full FAT scan. Bit 1 controls the use of last allocated cluster number.
+/
+/  bit0=0: Use free cluster count in the FSINFO if available.
+/  bit0=1: Do not trust free cluster count in the FSINFO.
+/  bit1=0: Use last allocated cluster number in the FSINFO if available.
+/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+#define FF_FS_LOCK		0
+/* The option FF_FS_LOCK switches file lock function to control duplicated file open
+/  and illegal operation to open objects. This option must be 0 when FF_FS_READONLY
+/  is 1.
+/
+/  0:  Disable file lock function. To avoid volume corruption, application program
+/      should avoid illegal open, remove and rename to the open objects.
+/  >0: Enable file lock function. The value defines how many files/sub-directories
+/      can be opened simultaneously under file lock control. Note that the file
+/      lock control is independent of re-entrancy. */
+
+
+/* #include <somertos.h>	// O/S definitions */
+#define FF_FS_REENTRANT	0
+#define FF_FS_TIMEOUT	1000
+#define FF_SYNC_t		HANDLE
+/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs
+/  module itself. Note that regardless of this option, file access to different
+/  volume is always re-entrant and volume control functions, f_mount(), f_mkfs()
+/  and f_fdisk() function, are always not re-entrant. Only file/directory access
+/  to the same volume is under control of this function.
+/
+/   0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect.
+/   1: Enable re-entrancy. Also user provided synchronization handlers,
+/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/      function, must be added to the project. Samples are available in
+/      option/syscall.c.
+/
+/  The FF_FS_TIMEOUT defines timeout period in unit of time tick.
+/  The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*,
+/  SemaphoreHandle_t and etc. A header file for O/S definitions needs to be
+/  included somewhere in the scope of ff.h. */
+
+
+#define _WORD_ACCESS	1	/* 0 or 1 */
+/* The _WORD_ACCESS option is an only platform dependent option. It defines
+/  which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access. Always compatible with all platforms.
+/   1: Word access. Do not choose this unless under both the following conditions.
+/
+/  * Address misaligned memory access is always allowed for ALL instructions.
+/  * Byte order on the memory is little-endian.
+/
+/  If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
+/  reduce code size. Following table shows an example of some processor types.
+/
+/   ARM7TDMI    0           ColdFire    0           V850E2      0
+/   Cortex-M3   0           Z80         0/1         V850ES      0/1
+/   Cortex-M0   0           RX600(LE)   0/1         TLCS-870    0/1
+/   AVR         0/1         RX600(BE)   0           TLCS-900    0/1
+/   AVR32       0           RL78        0           R32C        0
+/   PIC18       0/1         SH-2        0           M16C        0/1
+/   PIC24       0           H8S         0           MSP430      0
+/   PIC32       0           H8/300H     0           x86         0/1
+*/
+
+#define FF_USE_STRINGLIB   0  /* 0 or 1 */
+/*
+ * if 1 Use standard string.h for memcpy, memcmp, memset, strchr
+ * if 0 use own
+ */
+
+/*--- End of configuration options ---*/