add new target 'AOCODARCF722MINI'

src/main/target/AOCODARCF7MINI/CMakeLists.txt

@@ -0,0 +1,2 @@
+target_stm32f722xe(AOCODARCF7MINI_V1)
+target_stm32f722xe(AOCODARCF7MINI_V2)

src/main/target/AOCODARCF7MINI/target.c

@@ -0,0 +1,54 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <stdint.h>
+
+#include "platform.h"
+
+#include "drivers/bus.h"
+#include "drivers/io.h"
+#include "drivers/pwm_mapping.h"
+#include "drivers/timer.h"
+#include "drivers/pinio.h"
+#include "drivers/sensor.h"
+
+BUSDEV_REGISTER_SPI_TAG(busdev_mpu6500,     DEVHW_MPU6500,      MPU6500_SPI_BUS,    MPU6500_CS_PIN,     MPU6500_EXTI_PIN,       0,  DEVFLAGS_NONE,  IMU_MPU6500_ALIGN);
+
+timerHardware_t timerHardware[] = {
+    DEF_TIM(TIM1, CH3, PA10,  TIM_USE_PPM, 0, 0),                            // PPM, RX1  
+
+    DEF_TIM(TIM3, CH1, PB4,   TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR, 0, 0),     // S1   D(1, 4, 5)
+    DEF_TIM(TIM3, CH2, PB5,   TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR, 0, 0),     // S2   D(1, 5, 4)   
+    DEF_TIM(TIM3, CH3, PB0,   TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR, 0, 0),     // S3   D(1, 7, 5)
+    DEF_TIM(TIM3, CH4, PB1,   TIM_USE_MC_MOTOR | TIM_USE_FW_MOTOR, 0, 0),     // S4   D(1, 2, 5)
+
+#if defined(AOCODARCF7MINI_V2)
+    DEF_TIM(TIM8, CH3, PC8,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),    // S5   D(2, 4, 7)
+    DEF_TIM(TIM8, CH4, PC9,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),    // S6   D(2, 7, 7)
+#else
+    DEF_TIM(TIM2, CH2, PB3,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),    // S6   D(1, 6, 3)
+#endif
+
+    DEF_TIM(TIM4, CH1, PB6,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),    // S7   D(1, 0, 2)    
+    DEF_TIM(TIM4, CH2, PB7,   TIM_USE_MC_MOTOR | TIM_USE_FW_SERVO, 0, 0),    // S8   D(1, 3, 2)
+
+    DEF_TIM(TIM1, CH1, PA8,  TIM_USE_LED, 0, 0),                             // LED     
+
+};
+
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);

src/main/target/AOCODARCF7MINI/target.h

@@ -0,0 +1,171 @@
+/*
+ * This file is part of INAV.
+ *
+ * INAV is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "AO7M"
+
+#if defined(AOCODARCF7MINI_V2)
+#define USBD_PRODUCT_STRING  "AocodaRCF7MiniV2"
+#else
+#define USBD_PRODUCT_STRING  "AocodaRCF7MiniV1"
+#endif
+
+#define LED0                    PA13
+
+#define BEEPER                  PC13
+#define BEEPER_INVERTED
+
+// *************** SPI1 Gyro & ACC *******************
+#define USE_TARGET_IMU_HARDWARE_DESCRIPTORS
+
+#define USE_SPI
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN            PA5
+#define SPI1_MISO_PIN           PA6
+#define SPI1_MOSI_PIN           PA7
+
+#define USE_IMU_MPU6500
+#define IMU_MPU6500_ALIGN       CW0_DEG
+#define MPU6500_CS_PIN          PB2
+#define MPU6500_SPI_BUS         BUS_SPI1
+
+#define USE_EXTI
+#define MPU6500_EXTI_PIN        PC4
+
+#define USE_MPU_DATA_READY_SIGNAL
+
+// *************** I2C /Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL                PB8
+#define I2C1_SDA                PB9
+
+#define USE_BARO
+#define BARO_I2C_BUS            BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_MS5611
+#define USE_BARO_DPS310
+
+#define USE_MAG
+#define MAG_I2C_BUS             BUS_I2C1
+#define USE_MAG_AK8975
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+#define USE_MAG_MAG3110
+#define USE_MAG_LIS3MDL
+
+#define TEMPERATURE_I2C_BUS     BUS_I2C1
+
+#define PITOT_I2C_BUS           BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS     BUS_I2C1
+
+// *************** SPI2 OSD ***********************
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN            PB13
+#define SPI2_MISO_PIN           PB14
+#define SPI2_MOSI_PIN           PB15
+
+#define USE_OSD
+#define USE_MAX7456
+#define MAX7456_SPI_BUS         BUS_SPI2
+#define MAX7456_CS_PIN          PB12
+
+// *************** SPI3 FLASH BLACKBOX*******************
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN            PC10
+#define SPI3_MISO_PIN           PC11
+#define SPI3_MOSI_PIN           PC12
+
+
+#define USE_FLASHFS
+#define USE_FLASH_M25P16
+#define M25P16_SPI_BUS          BUS_SPI3
+#define M25P16_CS_PIN           PD2
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+
+// *************** UART *****************************
+#define USE_VCP
+#define USB_DETECT_PIN          PC14
+#define USE_USB_DETECT
+
+#define USE_UART1
+#define UART1_TX_PIN            PA9
+#define UART1_RX_PIN            PA10
+
+#define USE_UART2
+#define UART2_TX_PIN            PA2
+#define UART2_RX_PIN            PA3
+
+#define USE_UART3
+#define UART3_TX_PIN            PB10
+#define UART3_RX_PIN            PB11
+
+#define USE_UART4
+#define UART4_TX_PIN            PA0
+#define UART4_RX_PIN            PA1
+
+#define USE_UART6
+#define UART6_TX_PIN            PC6
+#define UART6_RX_PIN            PC7
+
+#define SERIAL_PORT_COUNT       6
+
+#define DEFAULT_RX_TYPE         RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER       SERIALRX_SBUS
+#define SERIALRX_UART           SERIAL_PORT_USART1
+
+// *************** ADC *****************************
+#define USE_ADC
+#define ADC_INSTANCE                ADC1
+#define ADC1_DMA_STREAM             DMA2_Stream0
+
+#define ADC_CHANNEL_1_PIN           PC2
+#define ADC_CHANNEL_2_PIN           PC1
+#define ADC_CHANNEL_3_PIN           PC0
+
+#define VBAT_ADC_CHANNEL            ADC_CHN_1
+#define CURRENT_METER_ADC_CHANNEL   ADC_CHN_2
+#define RSSI_ADC_CHANNEL            ADC_CHN_3
+
+// *************** PINIO ***************************
+
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN                  PA8
+
+#define DEFAULT_FEATURES                (FEATURE_OSD | FEATURE_TELEMETRY | FEATURE_CURRENT_METER | FEATURE_VBAT | FEATURE_BLACKBOX | FEATURE_TX_PROF_SEL)
+#define CURRENT_METER_SCALE     400
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD 0xffff
+
+#define MAX_PWM_OUTPUT_PORTS        10
+#define USE_DSHOT
+#define USE_SERIALSHOT
+#define USE_ESC_SENSOR