Migrated to https://gitlab.esss.lu.se/icshwi/nss-instruments/det_param_gen

Directory Stucture

This git repo should be included as a submodule.

Making a Change to Parameter Map

1. Open the parameter map file you need to
2. Make the change
3. commit the change to the repository. This is important as the git hash is mapped into the register map
4. go to /src and run parse_param.py ../../param_def/

Parameter Map Keys

The parameter definition files contain a map which contains key value pairs that are parsed and used to generate VHDL and EPICS. Only the label and type keys are required.

Key	Description	Example Values
label	The label used for the parameter
type	One of the types in param_def.json	"MAC"
default	The default value written into firmware	"x\"feedf00d\""
min	Used to set the minimum allowable value of PV	1000
max	Used to set the maximum allowable value of PV	1000
pini	Process on init. Default is dependend on parameter type, normally TRUE	0
scan	PV scan rate. Default is dependend on parameter type. Use EPICS formatting	Passive
vec	creates multiple versions of the same parameter in this space

Example Parameter File

{
    "project name"    : "Detector Group Readout Slave",
    "space full name" : "User Configuration Register Space (Slave)",
    "space label"     : "usr_params_slv",
    "addr bus width"  : "32",
    "address offset"  : "0x40000000",
    "rings"           : "12",
    "ring space"      : "0x10000000",
    "nodes"           : "24",
    "node space"      : "0x00800000",
    "parameter map"    : [
        {"label": "ro_test", "type": "RO",	"default": "x\"feedf00d\"", "pini": "0","scan":"Passive", "desc": "Read only test register - should read 0xfeedfood"},
        {"label": "rw_test", "type": "RW",  "default": "x\"babacede\"", "pini": "0", "desc": "Read/write test register - initial value is 0xbabcede"},
        {"label": "resetn",  "type": "RW",  "default": "x\"00000000\"", "pini": "0", "desc": "Active-low reset for slave test data generator."},
        {"label": "idles",   "type": "RW",  "default": "x\"0000000a\"", "pini": "0", "desc": "Idle clock cycles between packets produed by slave test data generator."}
    ]
}